Tensioned Professional Electrol - Projection screen DA-LITE - Free user manual and instructions
Find the device manual for free Tensioned Professional Electrol DA-LITE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motorized projection screen |
| Brand | Da-Lite |
| Model | Tensioned Professional Electrol |
| Screen Surface | Tab-tensioned for maximum flatness |
| Aspect Ratio | Available in 16:9, 16:10, and 4:3 configurations |
| Diagonal Screen Sizes | From 84" to 200" (depending on model) |
| Motorized Operation | Yes, electric motor for raising and lowering |
| Motor Voltage | 120V AC or 230V AC (specific models) |
| Control Options | Wall switch, IR remote, RF control (depending on configuration) |
| Mounting Options | Ceiling, wall, or recessed installation |
| Tensioning System | Side and bottom tensioning cables for wrinkle-free image |
| Screen Material | Wide-angle da-mat (or optional high-power) |
| Optimum Viewing | Monochromatic surface for true color reproduction |
| Cleaning | Wipe screen surface gently with dry microfiber cloth; non-abrasive |
| Maintenance | Periodic check of motor and tension cables |
| Power Cord Length | Typically 12 ft (3.6 m) |
| Case Material | Aluminum extrusion |
| Certifications | UL, cUL, CE |
| Safety Features | Auto-stop at end of travel, thermal protection |
| Repairs/Spare Parts | Motor and control module replaceable; screen surface can be replaced |
| Warranty | 2-year limited warranty |
| Return Policy | Check authorized dealer |
Frequently Asked Questions - Tensioned Professional Electrol DA-LITE
What is the difference between tensioned and non-tensioned screens?
A tensioned screen has cables or fasteners that pull the screen surface taut from the sides and bottom, ensuring a perfectly flat picture without wrinkles. Non-tensioned screens may have slight ripples or curling. The Tensioned Professional Electrol uses a tab-tensioning system for maximum image flatness.
How do I choose the right screen size for my room?
Measure your room and seating distance. As a rule of thumb, the screen diagonal should be about 1/3 of the viewing distance for 1080p content. For 4K, you can sit closer. The Tensioned Professional Electrol is available in sizes from 84" to 200" diagonal, so measure your available wall or ceiling space to ensure a proper fit.
Can I mount the Tensioned Professional Electrol on a wall?
Yes, the screen supports wall, ceiling, or recessed mounting. Optional mounting brackets are available. Ensure the wall/ceiling can support the weight and use appropriate anchors.
Is the screen surface washable?
The screen surface is not designed for washing. For dust, use a dry microfiber cloth or a soft brush. If there are difficult stains, consult the manual or contact Da-Lite. Never use liquids or chemicals, as they can damage the reflective coating.
What control options are available?
The screen supports wall switches, IR remotes, and RF control depending on the model and configuration. Some versions also accept low-voltage triggers from projectors or automation systems for convenient synchronized operation.
Does the screen stop automatically when fully lowered or raised?
Yes, the motor includes limit switches that automatically stop the screen at the fully open and fully closed positions. These limits are adjustable during installation to fit your preferred stop points.
Can I connect this screen to a smart home system?
Most models can be integrated into smart home systems via dry contact relays, IP control, or a low-voltage trigger. Check your specific model to see which interface is available. Some require an optional control module.
How do I change the motor or screen surface if it gets damaged?
The motor and screen fabric are field replaceable. Contact Da-Lite or an authorized dealer for genuine service kits. Follow the service manual instructions carefully. The screen surface is attached with a removable spline or rivets, and the motor is accessible via the end cap.
What is the recommended cleaning solution for the screen?
Use only a dry microfiber cloth for routine dusting. For stubborn fingerprints or light marks, you can apply very mild diluted soap on a damp (not wet) cloth, then gently wipe and air dry. Always test in a small area first. Avoid alcohol, ammonia, or harsh abrasives.
How do I reset the screen limits after installation?
Most Da-Lite screens have adjustable limit switches inside the motor unit. With the screen installed, run it to the desired top position and adjust the limit screw, then do the same for the bottom. Refer to the manual for exact steps. Never adjust limits while the screen is moving.
User questions about Tensioned Professional Electrol DA-LITE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projection screen in PDF format for free! Find your manual Tensioned Professional Electrol - DA-LITE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Tensioned Professional Electrol by DA-LITE.
USER MANUAL Tensioned Professional Electrol DA-LITE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DA-LITE
Model : Tensioned Professional Electrol
Category : Projection screen