Paradigm LCQ 350 - Air Conditioning Braemar - Free user manual and instructions
Find the device manual for free Paradigm LCQ 350 Braemar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split System Air Conditioner |
| Cooling Capacity | 3.5 kW (approx. 12,000 BTU/h) |
| Heating Capacity | 3.5 kW (reverse cycle) |
| Energy Efficiency | 3.5 EER / 3.6 COP |
| Power Supply | 220-240V, 50Hz, 10A |
| Indoor Unit Dimensions (WxHxD) | 800 x 290 x 210 mm |
| Outdoor Unit Dimensions (WxHxD) | 720 x 430 x 270 mm |
| Indoor Unit Weight | 8.5 kg |
| Outdoor Unit Weight | 22.0 kg |
| Refrigerant Type | R32 |
| Operating Modes | Cool, Heat, Fan, Dry, Auto |
| Fan Speeds | 3 (Low, Medium, High) + Auto |
| Remote Control | Included (wireless infrared) |
| Timer Function | On/Off timer (up to 24 hours) |
| Sleep Mode | Yes |
| Auto Restart | Yes (after power failure) |
| Air Filter | Washable electrostatic filter |
| Noise Level Indoor (Low/High) | 25 / 45 dB(A) |
| Noise Level Outdoor | 52 dB(A) |
| Maintenance | Clean filter every 2 weeks; professional service annually |
| Safety Features | Overheat protection, auto shut-off on fault, child lock on remote |
| Spare Parts Available | Filter, remote control, fan motor, PCB |
| Repairability Index | 7.5 / 10 |
Frequently Asked Questions - Paradigm LCQ 350 Braemar
How do I clean the air filter?
Open the front panel, remove the filter, wash with warm water and mild detergent, dry thoroughly, then reinstall. Clean every two weeks for optimal performance.
Why is my air conditioner not cooling?
Check if the unit is set to 'Cool' mode and the temperature is set lower than room temperature. Ensure the filter is clean and the outdoor unit has proper airflow. If the issue persists, contact a qualified technician.
What does the error code E1 mean?
Error code E1 indicates a room temperature sensor fault. Try unplugging the unit for 5 minutes then restart. If it reappears, call service.
How do I set the timer?
Press the 'Timer' button on the remote. Use +/- to set the desired on/off time (up to 24 hours). Press 'Timer' again to confirm. The clock on the remote must be set first.
Can I use an extension cord?
No. The unit requires a dedicated power outlet with correct voltage (220-240V). Using an extension cord may cause overheating and fire risk.
How often should I service the air conditioner?
Professional servicing is recommended annually to check refrigerant levels, clean coils, and ensure safe operation.
Why is water leaking from the indoor unit?
A clogged condensate drain or dirty filter can cause leaks. Turn off the unit, clean the filter, and check the drain pipe for blockages. If problem continues, call a technician.
What is the sleep mode?
Sleep mode gradually adjusts temperature (usually +1°C after 1 hour) for comfortable sleep. It also reduces fan noise. Activate via remote's 'Sleep' button.
Is the remote control universal?
No. Use only the Braemar remote supplied with this model. Generic remotes may not work correctly.
How do I change from Celsius to Fahrenheit?
With the remote off, press and hold the 'Mode' button for 5 seconds. The display will toggle between °C and °F. Release when desired unit appears.
User questions about Paradigm LCQ 350 Braemar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual Paradigm LCQ 350 - Braemar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Paradigm LCQ 350 by Braemar.
USER MANUAL Paradigm LCQ 350 Braemar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Braemar
Model : Paradigm LCQ 350
Category : Air Conditioning