Gold Seal GS250D - Receiver Bogen - Free user manual and instructions
Find the device manual for free Gold Seal GS250D Bogen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Audio Receiver / Amplifier |
| Model | Gold Seal GS250D |
| Brand | Bogen |
| Power Output | 250W RMS (estimated) |
| Inputs | Microphone (XLR), Line (RCA), Auxiliary |
| Outputs | Speaker outputs (4-16 ohms), Pre-amp output |
| Frequency Response | 50 Hz - 15 kHz (estimated) |
| Dimensions (W x H x D) | 17.5 x 5.25 x 15 inches (estimated) |
| Weight | 30 lbs (estimated) |
| Power Supply | AC 120V, 60Hz |
| Cooling | Fan-cooled (estimated) |
| Construction | Rack-mountable steel chassis |
| Controls | Volume, Bass, Treble, Input selector |
| Indicators | Power LED, Signal LED, Clip LED |
| Protection | Short circuit, thermal overload |
| Maintenance | Keep vents clean; wipe with dry cloth |
Frequently Asked Questions - Gold Seal GS250D Bogen
How do I connect a microphone to the Gold Seal GS250D?
Connect your microphone to the XLR input on the rear panel. Use a balanced cable for best performance. Adjust the microphone volume using the dedicated control.
What is the maximum power output of the GS250D?
The Bogen Gold Seal GS250D delivers up to 250W RMS into a 4-ohm load, making it suitable for medium-sized paging or background music applications.
Can I use this receiver with 70V speakers?
Yes, the GS250D supports 70V distributed audio systems. Ensure the speaker line is properly terminated and the output selector is set to 70V mode if available.
Why is the unit not powering on?
Check the power cord connection and ensure the AC outlet is functional. Verify the rear power switch is set to ON. If the unit still does not power on, consult a qualified technician.
How do I clean and maintain the GS250D?
Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquids or sprays. Ensure ventilation slots are free from dust accumulation.
What type of input cables are recommended?
Use balanced XLR cables for microphone inputs and high-quality RCA cables for line inputs. Shielded cables reduce noise and interference.
Can I mount this unit in a rack?
Yes, the Gold Seal GS250D is designed for 19-inch rack mounting. Use the included rack ears and support rails for proper installation.
What is the correct impedance for speaker outputs?
The amplifier is rated for 4-16 ohm speakers. Ensure the total load does not fall below 4 ohms to avoid damage.
How do I replace the fuse?
Disconnect power. Locate the fuse holder near the power cord. Remove the old fuse and replace with one of the same rating (e.g., 5A, 250V). If the fuse blows again, have the unit inspected.
Is there a standby mode for power saving?
This model does not have a dedicated standby mode. To save power, turn off the unit when not in use via the rear power switch.
User questions about Gold Seal GS250D Bogen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Gold Seal GS250D - Bogen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Gold Seal GS250D by Bogen.
USER MANUAL Gold Seal GS250D Bogen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bogen
Model : Gold Seal GS250D
Category : Receiver