EC 10SB (SL) - Compressor HITACHI - Free user manual and instructions
Find the device manual for free EC 10SB (SL) HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Compressor |
| Brand | Hitachi |
| Model | EC 10SB (SL) |
| Power | 1.5 kW (2 HP) |
| Max Pressure | 8 bar (116 psi) |
| Tank Capacity | 10 L |
| Air Displacement | 150 L/min |
| Voltage / Frequency | 230 V / 50 Hz |
| Weight | 25 kg |
| Dimensions (L x W x H) | 500 x 400 x 450 mm |
| Lubrication | Oil-lubricated |
| Drive | Belt-driven |
| Noise Level | 75 dB(A) |
| Protection Class | IP20 |
| Operating Temperature | 5°C to 40°C |
| Key Features | Thermal overload protection, pressure gauge, safety valve, drain valve |
| Maintenance | Check oil level regularly; clean air filter; drain condensation after use |
| Safety | Wear ear protection; ensure ventilation; disconnect power before servicing |
| Spare Parts | Available from authorized Hitachi service centers |
| Repairability | Repairable by qualified technician |
Frequently Asked Questions - EC 10SB (SL) HITACHI
How do I change the oil in my Hitachi EC 10SB compressor?
Ensure the compressor is off and cool. Locate the oil drain plug at the bottom of the pump. Remove the plug and drain old oil into a container. Replace the plug, then fill with recommended SAE 30 oil to the correct level. Always use the oil type specified in the manual.
What is the correct pressure setting for the EC 10SB?
The factory setting is typically 8 bar (116 psi). You can adjust the pressure switch by turning the adjustment screw. Refer to the manual for precise instructions. Do not exceed the maximum rated pressure of 8 bar.
How often should I drain the condensation from the tank?
After each use, open the drain valve at the bottom of the tank to release accumulated water. This prevents rust and prolongs tank life. In humid conditions, drain more frequently.
Why won't my compressor start?
Check if the power cord is plugged in and the switch is on. Ensure the thermal overload hasn't tripped. If it has, let the motor cool down and press the reset button. Also check the pressure switch and fuses.
Can I use an extension cord with the EC 10SB?
It is not recommended to use an extension cord as it can cause voltage drop and motor damage. If necessary, use a heavy-duty cord rated for at least 15 amps and keep it as short as possible.
What spare parts are commonly needed for this compressor?
Common spare parts include air filters, pressure switches, safety valves, and drive belts. These are available from Hitachi service centers or authorized dealers.
How do I clean the air filter?
Remove the air filter cover and take out the filter element. Clean it with compressed air (from inside out) or wash with mild soap and water if it's a foam filter. Allow to dry completely before reinstalling.
Is the Hitachi EC 10SB oil-lubricated or oil-less?
This model is oil-lubricated. It requires regular oil checks and changes. Using it without proper oil will cause severe pump damage.
What safety precautions should I take when using this compressor?
Always wear hearing protection (noise level up to 75 dB(A)) and safety glasses. Ensure the area is well-ventilated. Never point the air jet at people or animals. Disconnect power before performing any maintenance.
Why is there oil in the compressed air output?
This can indicate overfilling of oil, worn piston rings, or a clogged air filter. Check oil level first. If the problem persists, consult a technician for possible seal replacement.
User questions about EC 10SB (SL) HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual EC 10SB (SL) - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EC 10SB (SL) by HITACHI.