Ice Pro DB1000SA - Uncategorized Follett - Free user manual and instructions
Find the device manual for free Ice Pro DB1000SA Follett in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Undercounter Ice Machine |
| Model | Ice Pro DB1000SA |
| Brand | Follett |
| Ice Production Capacity | Up to 1000 lbs (454 kg) per day |
| Ice Type | Chewable ice nuggets |
| Dimensions (W x D x H) | 30 x 24 x 30 in (76 x 61 x 76 cm) |
| Weight | 120 lbs (54 kg) |
| Power Supply | 115 V / 60 Hz / 1 phase |
| Voltage | 115 V AC |
| Amperage | 10 A |
| Refrigerant Type | R-404A |
| Storage Bin Capacity | 40 lbs (18 kg) |
| Water Connection | 3/8-inch female flare fitting |
| Drain Connection | 3/4-inch male garden hose thread |
| Cleaning Cycle | Automatic self-cleaning with built-in sanitization |
| Self-Diagnostics | Electronic control board with LED status indicators |
| Maintenance | Clean condenser coils monthly; replace water filter every 6 months |
| Safety Features | High-pressure cut-off, low-water cut-off, and over-fill protection |
| Spare Parts Availability | All major components (compressor, fan motor, water pump) are field-replaceable |
| Compliance | NSF/ANSI 12, UL listed |
| Warranty | 3 years parts and labor |
Frequently Asked Questions - Ice Pro DB1000SA Follett
How often should I clean the Ice Pro DB1000SA?
It is recommended to run the automatic cleaning cycle every 3 months or more frequently in hard water conditions. Additionally, the condenser coils should be brushed clean monthly.
What type of ice does this machine produce?
The Ice Pro DB1000SA produces chewable nugget ice, also known as soft ice or Sonic-style ice. It is made by compressing flake ice into small, pillowy nuggets.
What are the electrical requirements?
The machine requires a dedicated 115 V, 60 Hz, 15 A circuit with a standard NEMA 5-15 receptacle. A GFCI outlet is recommended for safety.
How do I install the water line?
Connect a 3/8-inch female flare fitting to the water inlet. Use a copper or braided stainless steel supply line. The water pressure should be between 20-80 psi. Install a water filter (not included) for optimal performance.
What does error code E1 mean?
Error code E1 indicates a high-pressure cut-off. This is often caused by a dirty condenser coil or restricted airflow. Turn off the machine, clean the condenser, and restart after 10 minutes. If the error persists, contact service.
Can I install the machine under a counter?
Yes, the Ice Pro DB1000SA is designed for undercounter installation. Ensure 2 inches clearance on the top and sides for ventilation. The front grille must remain unobstructed.
How much ice does the bin hold?
The storage bin can hold up to 40 lbs (18 kg) of nugget ice. The machine will stop producing ice when the bin is full via a full bin sensor.
What maintenance is required?
Monthly: clean condenser coils and check water filter. Quarterly: run the self-cleaning cycle with approved cleaner. Annually: replace the water inlet valve and drain line for hygiene.
Is the machine NSF certified?
Yes, the Follett Ice Pro DB1000SA is NSF/ANSI 12 certified for commercial use, ensuring it meets sanitation and safety standards for foodservice.
How do I reset the machine after a power outage?
Simply unplug the unit for 30 seconds and plug it back in. The control board will reset and automatically start a clean cycle. If the machine does not restart, check the circuit breaker.
User questions about Ice Pro DB1000SA Follett
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Ice Pro DB1000SA - Follett and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ice Pro DB1000SA by Follett.