50CI425W-SI - Water dispenser Follett - Free user manual and instructions
Find the device manual for free 50CI425W-SI Follett in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bottleless Water Dispenser |
| Brand | Follett |
| Model | 50CI425W-SI |
| Installation Type | Point-of-Use (Plumbed) |
| Dimensions (H x W x D) | 40 x 12 x 14 inches |
| Weight | 30 lbs |
| Power Supply | 115V AC, 60Hz |
| Power Consumption | 200W (cooling), 600W (heating) |
| Water Capacity | N/A (continuous supply) |
| Temperature Settings | Cold (40°F), Hot (185°F), Room Temp |
| Filtration System | Integrated carbon filter, NSF 42 certified |
| Material | Stainless steel reservoir, ABS cabinet |
| Color | White |
| Control Type | Touch buttons with LED indicators |
| Dispensing Modes | Push-button or hands-free sensor |
| Child Safety Lock | Yes, on hot water |
| Filter Life | 6 months or 1,500 gallons |
| Filter Replacement | Easy twist-and-lock; no tools required |
| Water Connection | 1/4" quick-connect fitting |
| Certifications | UL, NSF 42, ANSI 53 |
| Warranty | 1 year parts and labor |
| User Manual Included | Yes, PDF available |
| Country of Origin | USA |
Frequently Asked Questions - 50CI425W-SI Follett
How do I install the Follett 50CI425W-SI water dispenser?
Installation requires a cold water line with a 1/4" copper or PEX tubing. Connect the supplied quick-connect fitting, plug the unit into a grounded outlet, and prime the system by dispensing water until flow is steady. For detailed steps, refer to the user manual.
How often should I replace the filter?
The filter should be replaced every 6 months or after dispensing 1,500 gallons, whichever comes first. A flashing red indicator light will alert you when replacement is due.
What temperatures does the dispenser provide?
The unit offers cold water at approximately 40°F (4°C), hot water at 185°F (85°C), and room temperature water.
How do I clean the water dispenser?
Clean the exterior with a soft damp cloth. For the internal system, run a cleaning cycle using a mixture of water and white vinegar (1:1 ratio) through the dispenser every 3 months. Rinse thoroughly with fresh water.
What does an error code E1 mean?
Error code E1 indicates a water leak detection. Check for loose connections or water pooling under the unit. Turn off the water supply and unplug the dispenser, then refer to the troubleshooting section of the manual.
Can I adjust the dispense volume per cup?
Yes, the dispenser has a volume adjustment feature. Press and hold the hot or cold button for 3 seconds to enter programming mode, then set the desired volume (e.g., 8 oz). The unit will automatically stop at that amount.
Is the water dispenser energy efficient?
The 50CI425W-SI is designed with energy-saving standby mode that reduces power consumption when not in use. It also has insulated reservoirs to minimize heat loss.
How do I descale the hot water tank?
To descale, empty the tank and pour a descaling solution (e.g., white vinegar or citric acid) into the reservoir. Let it sit for 30 minutes, then flush with fresh water. Repeat every 6 months to prevent mineral buildup.
Where can I buy replacement filters?
Replacement filters can be purchased directly from Follett's website or authorized dealers. Use model number FOL-50CI-FILTER for compatibility.
What is the warranty coverage?
The dispenser comes with a 1-year limited warranty covering parts and labor. The filter and other consumables are not covered. Contact Follett support for warranty claims.
User questions about 50CI425W-SI Follett
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water dispenser in PDF format for free! Find your manual 50CI425W-SI - Follett and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 50CI425W-SI by Follett.