Matrix-42-HDBT - Uncategorized DVDO - Free user manual and instructions
Find the device manual for free Matrix-42-HDBT DVDO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HDBaseT Matrix Switcher |
| Model Number | Matrix-42-HDBT |
| Brand | DVDO |
| Number of HDMI Inputs | 4 |
| Number of HDMI Outputs | 2 |
| HDBaseT Output | Yes (1 output) |
| Supported Resolutions | Up to 4K@60Hz (4:4:4) |
| HDBaseT Distance | Up to 100m (CAT6) |
| Video Bandwidth | 18 Gbps |
| Audio Support | PCM, Dolby TrueHD, DTS-HD Master Audio |
| Control Interface | IR, RS-232, Ethernet |
| EDID Management | Built-in EDID control |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 25W (max) |
| Dimensions (W x D x H) | 430 x 200 x 44 mm |
| Weight | 2.1 kg |
| Mounting | Rackmount (1U) |
| Operating Temperature | 0°C to 45°C |
| Certifications | CE, FCC, RoHS |
| Cleaning Instructions | Use a dry, soft cloth; avoid liquids |
| Spare Parts Availability | Not available; contact support |
Frequently Asked Questions - Matrix-42-HDBT DVDO
What are the supported video resolutions?
The Matrix-42-HDBT supports resolutions up to 4K@60Hz (4:4:4), as well as full HD and lower resolutions.
How do I connect the HDBaseT output?
Use a CAT6 cable (or higher) to connect the HDBaseT output to a compatible HDBaseT receiver. The maximum distance is 100 meters at 4K resolution.
Can I control the matrix via IR?
Yes, you can control it using the included IR remote or connect an external IR receiver for remote control.
What is the default EDID setting?
The default EDID is set to 4K@60Hz (SMPTE). You can change it via the OSD or RS-232 commands.
Does the unit support audio embedding or de-embedding?
The matrix supports audio de-embedding via the HDBaseT output and analog audio output (if available). Check your model for specific ports.
How do I switch between inputs manually?
Press the input selection buttons on the front panel, use the IR remote, or issue RS-232 / IP commands.
Is the unit rackmountable?
Yes, it is designed for 1U rackmount with included rack ears. Dimensions: 430 x 200 x 44 mm.
What power supply is required?
The unit uses a standard AC 100-240V, 50/60Hz power supply with a max consumption of 25W.
What to do if there is no video output?
Check that all HDMI cables are securely connected and the EDID is compatible with your display. Also verify the HDBaseT cable is CAT6 or better and < 100m.
How do I reset the matrix to factory defaults?
Press and hold the Menu button on the front panel for 10 seconds, then release. The unit will reboot with default settings.
User questions about Matrix-42-HDBT DVDO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Matrix-42-HDBT - DVDO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Matrix-42-HDBT by DVDO.
USER MANUAL Matrix-42-HDBT DVDO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DVDO
Model : Matrix-42-HDBT
Category : Uncategorized