Slimpar COB 60 - Projector Sagitter - Free user manual and instructions
Find the device manual for free Slimpar COB 60 Sagitter in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | LED PAR Projector |
| Brand | Sagitter |
| Model | Slimpar COB 60 |
| Light Source | COB LED 60W |
| Beam Angle | 45° |
| Color Temperature | 3200K / 5600K selectable |
| DMX Channels | 1/2/3 channels |
| Control Modes | DMX, Master/Slave, Auto, Sound Active |
| Power Consumption | 60W |
| Input Voltage | AC 100-240V, 50/60Hz |
| Dimensions (W x D x H) | 250 x 200 x 180 mm |
| Weight | 2.5 kg |
| Housing Material | Aluminum |
| Cooling | Active cooling fan |
| Protection Rating | IP20 (indoor use only) |
| Mounting Options | Floor stand or truss mounting via clamp |
| Display | Digital LED display |
| Fuse | T1A 250V |
| Accessories Included | Power cord, mounting bracket |
| Maintenance | Clean lens with soft, dry cloth. Ensure ventilation grills are not blocked. |
| Safety Warning | Do not look directly into the beam. Install in well-ventilated area. Disconnect power before cleaning. |
Frequently Asked Questions - Slimpar COB 60 Sagitter
How do I reset the fixture to factory defaults?
Press and hold the Menu button for 5 seconds until the display shows 'Reset'. Confirm with Enter to restore factory settings.
What is the DMX address range?
The DMX address can be set from 001 to 512 via the control panel menu.
Can I use the Slimpar COB 60 without a DMX controller?
Yes, you can use it in Master/Slave mode, Auto mode (built-in programs), or Sound Active mode (sound-activated via internal microphone).
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with water or a lens cleaner. Gently wipe the lens. Do not use abrasive cleaners or solvents.
What is the beam angle?
The beam angle is 45 degrees, providing a medium wash effect.
Is this fixture suitable for outdoor use?
No, the Slimpar COB 60 has an IP20 rating, meaning it is designed for indoor use only. Keep it away from rain or moisture.
How to set sound activation?
Navigate to the control menu, select Sound mode, and press Enter. The fixture will react to music via its internal microphone. Adjust sensitivity if needed.
What is the power consumption?
The maximum power consumption is 60W, with an input voltage of AC 100-240V, 50/60Hz.
How to replace the fuse?
Disconnect power. The fuse holder is located near the power input. Use a flathead screwdriver to open it, replace with a T1A 250V fuse only. Close the holder and reconnect power.
What is included in the box?
The package includes the Slimpar COB 60 fixture, a power cord, and a mounting bracket with screws.
User questions about Slimpar COB 60 Sagitter
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual Slimpar COB 60 - Sagitter and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Slimpar COB 60 by Sagitter.
USER MANUAL Slimpar COB 60 Sagitter
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sagitter
Model : Slimpar COB 60
Category : Projector