LV-SN60DWC - Washing machine Milectric - Free user manual and instructions
Find the device manual for free LV-SN60DWC Milectric in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding washing machine |
| Model | LV-SN60DWC |
| Brand | Milectric |
| Capacity | 7 kg |
| Dimensions (H x W x D) | 850 x 595 x 540 mm |
| Weight | 65 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Energy Efficiency Class | A+++ |
| Maximum Spin Speed | 1200 rpm |
| Number of Programs | 15 |
| Display | LED |
| Drum Material | Stainless steel |
| Noise Level (Wash) | 56 dB |
| Noise Level (Spin) | 76 dB |
| Water Consumption per Cycle | 48 L |
| Annual Energy Consumption | 170 kWh |
| Child Lock | Yes |
| Delay Start | Yes |
| Partial Load Detection | Yes |
| Maintenance | Clean filter regularly, descale every 3 months |
| Safety Features | Leak protection, overload protection |
| Spare Parts Availability | Drum seal, belt, door lock available |
| Repairability | DIY-friendly, many parts accessible |
Frequently Asked Questions - LV-SN60DWC Milectric
How to install the washing machine?
Ensure a level floor and connect the water inlet hose to a cold water tap. Plug the power cord into a grounded outlet. Remove shipping bolts before first use. Refer to the installation guide in the manual.
What to do if the machine doesn't start?
Check if the door is closed properly and the child lock is disabled. Ensure the power supply is connected and the circuit breaker is not tripped. Press the Start/Pause button after selecting a program.
How to clean the filter?
Open the filter cover at the bottom front, place a container underneath, and unscrew the filter. Remove any lint or debris, then reinsert and tighten. Perform this every 2 months.
How to run a drum cleaning cycle?
Use the Drum Clean program (if available) or run a 90°C cotton cycle with a special drum cleaner or citric acid. Do not add laundry. This removes residue and odors.
The machine is noisy during spin cycle?
Check if the machine is level and all transport bolts are removed. Uneven loads can cause noise; redistribute laundry. Also, inspect the drum bearings and belt for wear.
Error code E30 appears?
Error E30 typically indicates a drainage problem. Clean the filter and check the drain hose for kinks. If persists, the pump may be blocked or faulty.
How to use the delay start feature?
Select your wash program, then press the Delay Start button repeatedly to set the desired delay (e.g., 3 hours). Press Start and the machine will begin after the delay.
What detergents are recommended?
Use high-efficiency (HE) detergent suitable for automatic washers. For soft water, use less detergent. Avoid excessive suds as they can cause poor rinsing.
How to unlock the child lock?
Press and hold the Child Lock button (or a combination of buttons, often indicated by a key icon) for 3-5 seconds until the indicator turns off.
Where to find spare parts?
Check authorized dealers or online stores using the model number LV-SN60DWC. Common parts like door seals, belts, and filters are widely available.
User questions about LV-SN60DWC Milectric
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual LV-SN60DWC - Milectric and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LV-SN60DWC by Milectric.
USER MANUAL LV-SN60DWC Milectric
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Milectric
Model : LV-SN60DWC
Category : Washing machine