SD-BC1DDX - Tumble dryer Infiniton - Free user manual and instructions
Find the device manual for free SD-BC1DDX Infiniton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble dryer |
| Brand | Infiniton |
| Model | SD-BC1DDX |
| Installation Type | Freestanding |
| Drying System | Condenser (self-condensing) |
| Capacity | 7 kg |
| Energy Efficiency Class | C |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 35 kg |
| Rated Power | 2000 W |
| Noise Level | 65 dB(A) |
| Number of Drying Programs | 15 |
| Drum Material | Stainless steel |
| Door Type | Solid door with reversible hinge |
| Control Type | Electronic with LED display |
| Delay Start | Yes (up to 24 hours) |
| Anti-Crease Function | Yes |
| Child Lock | Yes |
| Lint Filter Indicator | Yes |
| Water Tank Location | Top drawer |
| Cleaning and Maintenance | Clean lint filter after each use; empty water tank after each cycle; clean condenser periodically |
| Safety Features | Overheat protection, auto-off, child lock |
| Spare Parts Availability | Contact customer service for genuine parts |
| Repairability Index | 5.1 / 10 (estimated) |
Frequently Asked Questions - SD-BC1DDX Infiniton
How do I clean the lint filter?
Open the door and pull out the lint filter located in the door rim. Remove lint by hand or with a soft brush. Rinse under running water if needed, dry thoroughly, and reinsert. Clean after every cycle for optimal drying.
Where should I empty the water tank?
The water tank is located at the top left drawer. Pull it out, empty the water into a sink, and push it back in. The tank should be emptied after each cycle to avoid overflow.
What does the 'Filter' indicator mean?
The filter indicator lights up when the lint filter needs cleaning. Clean the filter as described, then reset the indicator by pressing and holding the 'Filter' button (if available) or by turning the dryer off and on.
How do I install the tumble dryer?
Place the dryer on a stable, level surface. Ensure adequate ventilation. Remove all packaging and transport bolts. Connect the power cord to a grounded outlet. If venting is needed, install the exhaust hose (not applicable for condenser models). Level the feet to prevent vibration.
Why is my laundry not fully dry?
Possible causes: overloaded drum, incorrect program selection, clogged lint filter, or full water tank. Also ensure the room temperature is between 5°C and 35°C. Try a smaller load and use the 'Extra Dry' program.
Can I wash and dry at the same time?
No, this is a standalone tumble dryer and does not have washing functions. Use it only for drying pre-washed laundry.
How do I activate the child lock?
Press and hold the 'Child Lock' button for 3 seconds until a lock icon appears on the display. Repeat to deactivate. The child lock prevents accidental button presses during operation.
What is the delay start function?
You can set the dryer to start after a delay of up to 24 hours. Press the 'Delay Start' button repeatedly to select the desired hours, then press 'Start'. The dryer will begin the cycle after the set delay.
How do I clean the condenser?
Locate the condenser access panel (usually at the bottom front). Open the panel, remove the condenser unit, and rinse it with water to remove lint. Allow it to dry completely before reinserting. Perform this cleaning every few months.
What spare parts are available?
Common spare parts include lint filters, water tanks, door hinges, belts, and heating elements. Contact Infiniton customer service or authorized dealers for genuine parts. The repairability index is estimated at 5.1/10.
User questions about SD-BC1DDX Infiniton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual SD-BC1DDX - Infiniton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SD-BC1DDX by Infiniton.