DGS-1530-52P - Switch D-LINK - Free user manual and instructions
Find the device manual for free DGS-1530-52P D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Switch with PoE+ |
| Model Number | DGS-1530-52P |
| Ports | 48 Gigabit PoE+ Ports + 4 Combo SFP+ Slots |
| PoE Budget | 370W total PoE power budget |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.95 Mpps |
| Dimensions (W x D x H) | 440 x 250 x 44 mm (19-inch 1U rackmount) |
| Weight | Approx. 6.5 kg |
| Power Supply | AC 100-240V, 50-60Hz, internal power supply |
| Max Power Consumption | 450W (full PoE load) |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, RMON |
| VLAN Support | 802.1Q VLAN, up to 4094 VLAN groups |
| Layer 3 Features | Static routing, RIP, OSPF |
| Certifications | CE, FCC, RoHS |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Cleaning Instructions | Use a soft dry cloth. Avoid liquid cleaners. |
| Safety Precautions | Disconnect power before servicing. Place in well-ventilated area. |
| Spare Parts Availability | AC power cord, rackmount kit, and SFP modules available separately. |
| Repairability Index | 5/10 (requires professional technician) |
Frequently Asked Questions - DGS-1530-52P D-LINK
How do I perform a factory reset on the DGS-1530-52P?
Press and hold the 'Reset' button on the front panel for 10 seconds using a paperclip. The device will reboot with factory defaults.
What is the maximum PoE power per port?
Each Gigabit PoE+ port can deliver up to 30W (IEEE 802.3at), with a total PoE budget of 370W.
How can I configure VLANs?
Access the web GUI, navigate to 'L2 Features > VLAN' and create 802.1Q VLANs. Assign ports with tagged or untagged membership.
Does the switch support stacking?
The DGS-1530-52P supports physical stacking via dedicated SFP+ ports, allowing up to 4 units in a stack.
How do I update the firmware?
Go to 'System > Firmware Upgrade' in the web GUI. Upload the latest firmware file from D-Link's support site. Do not power off during upgrade.
What cable types are supported for SFP+ ports?
SFP+ ports support 10GBASE-SR/LR and 10GBASE-CU direct attach cables (DAC) up to 10m.
How do I set up SNMP for network monitoring?
Enable SNMP in 'Management > SNMP' and configure community strings or SNMPv3 users. Ensure SNMP manager IP is allowed.
What do the LED indicators mean?
Port LEDs: solid green = link at 1000Mbps, blinking = activity; amber = PoE fault. System LED: steady green = power on.
Is the switch rackmountable?
Yes, it is 19-inch rackmountable. Use the included rackmount kit and screws. Ensure proper ventilation.
How do I enable Power over Ethernet (PoE) on a port?
PoE is enabled by default. To configure, go to 'PoE > Port Settings' in the web GUI and set power limit or enable/disable per port.
User questions about DGS-1530-52P D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual DGS-1530-52P - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGS-1530-52P by D-LINK.
USER MANUAL DGS-1530-52P D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : DGS-1530-52P
Category : Switch