DMS-1016 - Switch D-LINK - Free user manual and instructions
Find the device manual for free DMS-1016 D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 16-Port Gigabit Switch |
| Number of Ports | 16 |
| Port Type | 10/100/1000 Mbps Ethernet (RJ-45) |
| Form Factor | 1U Rackmountable |
| Dimensions (W x D x H) | 440 x 200 x 44 mm |
| Weight | 2.5 kg |
| Power Supply | Internal, 100-240V AC, 50/60 Hz |
| Power Consumption | 20 Watts (max) |
| Switching Capacity | 32 Gbps |
| MAC Address Table | 8K entries |
| Management | Unmanaged (plug-and-play) |
| Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3x |
| LED Indicators | Power, Link/Activity per port |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Cooling | Fanless (passive) |
| Installation | Desktop or rackmount |
| Cleaning | Wipe with dry soft cloth, avoid liquids |
| Safety | CE, FCC, RoHS compliant |
| Repairability | No user-serviceable parts; contact support |
| Package Contents | Switch, power cord, rackmount kit, quick start guide |
Frequently Asked Questions - DMS-1016 D-LINK
How do I connect the D-Link DMS-1016 switch?
Simply connect your devices using Ethernet cables to any of the 16 ports. Connect the power adapter and the switch will start automatically. It is plug-and-play, no configuration needed.
What are the LED indicators on the front panel?
Each port has a Link/Activity LED that lights solid when a connection is established and blinks with traffic. There is also a Power LED on the front.
Can I mount the DMS-1016 in a rack?
Yes, the switch is rackmountable (1U height). It comes with a rackmount kit and screws for standard 19-inch racks.
What is the maximum cable length supported?
The switch supports standard Ethernet cable lengths up to 100 meters (328 feet) per segment.
Does the switch support PoE (Power over Ethernet)?
No, the D-Link DMS-1016 is a standard switch and does not provide PoE. You will need a separate power source for PoE devices.
How do I reset the switch to factory defaults?
This unmanaged switch does not have a reset button. To reset, simply power off and on again. For any issues, contact D-Link support.
What should I do if a port does not connect?
Check the Ethernet cable and ensure it is securely inserted. Verify the connected device is powered on. Try a different port to rule out a faulty port. If the issue persists, the cable or device may be defective.
Can I connect the switch to another switch?
Yes, you can cascade switches by connecting any port on one switch to any port on another. The auto MDI/MDIX feature allows use of straight-through cables.
What is the power consumption of the DMS-1016?
The switch consumes approximately 20 Watts under full load, making it energy-efficient.
Where can I download the user manual?
The manual is available for free on notice-facile.com or from the D-Link support website in PDF format.
User questions about DMS-1016 D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual DMS-1016 - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DMS-1016 by D-LINK.
USER MANUAL DMS-1016 D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : DMS-1016
Category : Switch