VM-2240 - Receiver TOA - Free user manual and instructions
Find the device manual for free VM-2240 TOA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver (Mixer Amplifier) |
| Brand | TOA |
| Model | VM-2240 |
| Power Output | 240W RMS (4 ohms) |
| Number of Channels | 2 (Stereo) |
| Inputs | 3x Mic (balanced XLR), 2x Line (RCA), 1x Aux (3.5mm) |
| Outputs | 2x Speaker (binding posts), 1x Line out (RCA) |
| Frequency Response | 20 Hz – 20 kHz (+/- 1 dB) |
| Impedance | 4 – 16 ohms (speaker) |
| Total Harmonic Distortion | Less than 0.05% at rated output |
| Signal-to-Noise Ratio | More than 90 dB (line input) |
| Controls | Volume, Bass, Treble, Balance, Input select |
| Indicators | Power (blue), Signal (green), Clip (red) |
| Protection | Overload, short circuit, thermal shutdown |
| Cooling | Fan cooling (temperature-controlled) |
| Power Supply | AC 100-240 V, 50/60 Hz (internal switching) |
| Power Consumption | 350 W max |
| Dimensions (W x H x D) | 19.0 x 3.5 x 14.2 inches (rack mount, 2U) |
| Weight | 12.1 lbs (5.5 kg) |
| Construction | Metal chassis (steel, black finish) |
| Mounting | 19-inch rack mountable (brackets included) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Warranty | 2 years limited |
| Cleaning | Wipe with a dry cloth; do not use solvents |
| Safety | Class I equipment, grounded power cord required |
Frequently Asked Questions - VM-2240 TOA
What is the power output of the TOA VM-2240?
The TOA VM-2240 delivers 240 watts RMS per channel at 4 ohms, or 120 watts RMS per channel at 8 ohms, in stereo mode.
Can the VM-2240 be used with 70V/100V speakers?
No, the VM-2240 is a low-impedance amplifier designed for 4-16 ohm speakers. For high-impedance systems, use a matching transformer or a different model.
How do I connect a microphone to the VM-2240?
Connect a balanced XLR microphone to any of the three MIC inputs. The MIC inputs have +48V phantom power selectable via internal jumpers.
What should I do if the CLIP indicator lights up?
Reduce the volume or input level to prevent distortion and potential damage. The CLIP indicator warns that the amplifier is being overdriven.
Is the VM-2240 rack-mountable?
Yes, the VM-2240 is designed for 19-inch rack mounting and occupies 2U of rack space. Rack ears are included.
How do I clean the VM-2240?
Disconnect the power and wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasives.
What type of power cord does the VM-2240 use?
The VM-2240 uses a standard IEC C13 power cord with a ground pin. Ensure the outlet is properly grounded.
Can I daisy-chain multiple VM-2240 amplifiers?
Yes, the VM-2240 has a Line Out (RCA) that can feed the input of another amplifier for multi-zone setups.
What is the warranty period for the TOA VM-2240?
TOA provides a 2-year limited warranty from the date of purchase. Register your product online for full coverage.
How do I reset the VM-2240 to factory settings?
There is no user-accessible factory reset. For persistent issues, contact TOA customer support or consult the service manual.
User questions about VM-2240 TOA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual VM-2240 - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VM-2240 by TOA.
USER MANUAL VM-2240 TOA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TOA
Model : VM-2240
Category : Receiver