AV-60S-AM - Receiver TOA - Free user manual and instructions
Find the device manual for free AV-60S-AM TOA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Audio Receiver |
| Brand | TOA |
| Model | AV-60S-AM |
| Dimensions (W x H x D) | 19 inches (482 mm) x 1U (44 mm) x 300 mm |
| Weight | 4.2 kg |
| Power Supply | AC 100-240V, 50/60 Hz |
| Power Consumption | 60 W (max) |
| Frequency Response | 20 Hz - 20 kHz (±1 dB) |
| Output Power (RMS) | 40 W per channel at 8 ohms (stereo) |
| Input Impedance | 10 kOhms (unbalanced) |
| Signal-to-Noise Ratio | > 90 dB (A-weighted) |
| Total Harmonic Distortion | < 0.05% (at rated power) |
| Channels | 2 (stereo) |
| Inputs | 2 x RCA, 1 x XLR, 1 x 1/4" TRS |
| Outputs | Speaker binding posts, 1 x RCA record out |
| Cooling | Natural convection (fanless) |
| Operating Temperature | 0°C to 40°C |
| Mounting | 19-inch rack mountable (1U) |
| Maintenance | Clean exterior with a soft dry cloth; do not use solvents. |
| Safety | Do not expose to rain or moisture. Disconnect power before cleaning. |
| Spare Parts & Repairability | Contact TOA authorized service centers for replacement parts and repairs. |
| General Information | Professional-grade receiver designed for commercial audio installations. RoHS compliant. |
Frequently Asked Questions - AV-60S-AM TOA
How do I connect speakers to the AV-60S-AM?
Connect speakers to the binding post terminals on the rear panel. Ensure the impedance is 8 ohms or higher per channel. Use banana plugs or bare wire (<10 mm stripped).
What is the power output of this receiver?
The AV-60S-AM delivers 40 watts RMS per channel into 8 ohms, stereo. Total power consumption is 60 watts.
Can I use this receiver in a 19-inch rack?
Yes, the AV-60S-AM is 1U rack-mountable (482 mm width). Use the included rack ears and screws for secure installation.
What input sources can I connect?
The receiver has 2 RCA line inputs, 1 XLR input, and 1 1/4-inch TRS input. These can accept signals from CD players, mixers, microphones (via preamp if needed), or other line-level sources.
How do I clean the receiver?
Use a soft dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials. Keep ventilation slots free of dust.
Is there a protection circuit?
Yes, the receiver includes overload and short-circuit protection. If protection activates, turn off the unit, correct the fault, and wait a few minutes before powering on again.
What is the frequency response?
The frequency response is 20 Hz to 20 kHz with a tolerance of ±1 dB, ensuring accurate audio reproduction.
Does the AV-60S-AM have a built-in amplifier?
Yes, it is an integrated stereo receiver with a built-in amplifier. No external amplifier is required for passive speakers.
Can I use it in a 100V line system?
No, the AV-60S-AM is designed for low-impedance speakers (8 ohms). For 100V line systems, use a matching transformer or a different TOA model.
Where can I find the user manual?
The user manual is available for free download on the official TOA website or from manual sources like notice-facile.com. It contains detailed installation and operation instructions.
User questions about AV-60S-AM TOA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual AV-60S-AM - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AV-60S-AM by TOA.
USER MANUAL AV-60S-AM TOA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TOA
Model : AV-60S-AM
Category : Receiver