KN-COB-DP2CA - Carbon monoxide detector KIDDE - Free user manual and instructions
Find the device manual for free KN-COB-DP2CA KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Carbon Monoxide Detector |
| Brand | Kidde |
| Model | KN-COB-DP2CA |
| Power Source | 120V AC hardwired with 9V battery backup |
| Sensor Type | Electrochemical |
| Display | Digital numeric display showing CO levels in ppm |
| Alarm Loudness | 85 dB at 10 feet |
| Dimensions (approx.) | 5.5 x 3.5 x 1.5 inches (14 x 8.9 x 3.8 cm) |
| Weight (approx.) | 0.5 lb (227 g) |
| End-of-Life Warning | After approximately 10 years of operation |
| Key Features | Test/Hush button, Peak Level memory, Voice warning |
| Installation | Wall mount or ceiling mount (hardwired) |
| Certifications | UL 2034 listed |
| Warranty | 10-year limited warranty |
| Maintenance | Test weekly, vacuum dust off monthly |
| Battery Backup | 9V alkaline battery (included) |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Operating Humidity | 5% to 95% non-condensing |
| Interconnectability | Interconnectable with up to 12 Kidde devices |
| Smart Features | None (non-smart detector) |
Frequently Asked Questions - KN-COB-DP2CA KIDDE
Where should I install the KN-COB-DP2CA CO detector?
Install it outside each sleeping area and on every level of your home. Mount it on a wall at least 5 feet above the floor or on the ceiling, away from vents and windows.
How do I test the alarm?
Press and hold the Test/Hush button until the alarm sounds. The digital display will show '---' during test. Release the button to stop.
What does the Hush feature do?
The Hush button temporarily silences the alarm for about 9 minutes if you are experiencing a known false alarm (e.g., from cooking). The unit will automatically reset.
What does the digital display show?
It shows the current CO concentration in parts per million (ppm). When CO is detected, it displays the peak level it recorded since last reset.
How often should I replace the battery?
Replace the 9V backup battery at least once a year, or when the unit chirps indicating low battery. The detector also has a 10-year end-of-life warning.
Why does my CO detector chirp intermittently?
Chirping typically indicates a low backup battery, end-of-life, or a malfunction. Replace the battery first; if chirping continues, the unit may need replacement.
Can I interconnect multiple Kidde detectors?
Yes, the KN-COB-DP2CA can interconnect with up to 12 Kidde smoke or CO alarms. Use the interconnect wire (yellow) for hardwired connection.
What should I do if the alarm sounds continuously?
If the alarm sounds 4 beeps followed by a pause, this indicates dangerous CO levels. Immediately evacuate, call emergency services, and do not re-enter until cleared.
How do I clean and maintain the detector?
Vacuum the detector cover monthly using a soft brush attachment to remove dust. Do not use water or cleaners. Test it weekly.
What is the lifespan of the detector?
The KN-COB-DP2CA has a 10-year lifespan from the date of installation. The unit will chirp and display 'End' to indicate it needs replacement.
User questions about KN-COB-DP2CA KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Carbon monoxide detector in PDF format for free! Find your manual KN-COB-DP2CA - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KN-COB-DP2CA by KIDDE.
USER MANUAL KN-COB-DP2CA KIDDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KIDDE
Model : KN-COB-DP2CA
Category : Carbon monoxide detector