TruSense 3050-VASC10 - Smoke detector KIDDE - Free user manual and instructions
Find the device manual for free TruSense 3050-VASC10 KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke Detector |
| Brand | Kidde |
| Model | TruSense 3050-VASC10 |
| Sensor Type | Photoelectric |
| Power Source | Sealed 10-Year Lithium Battery |
| Battery Life | 10 Years |
| Dimensions (Diameter) | 5.6 inches (14.2 cm) |
| Dimensions (Height) | 2.0 inches (5.1 cm) |
| Weight | 0.5 lbs (0.23 kg) |
| Alarm Sound Level | 85 dB at 10 feet |
| Test Button | Yes |
| Hush Feature | Yes |
| End-of-Life Warning | Yes (chirp pattern) |
| Smart Features | Voice alerts (e.g., “Hush Activated”) |
| Interconnectable | No (standalone unit) |
| Installation Location | Ceiling or wall |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Humidity Range | Up to 95% non-condensing |
| Compliance | UL 217 listed |
| Part Number | 3050-VASC10 |
| Warranty | 10 years limited |
| Maintenance | Vacuum clean monthly; test weekly; no battery replacement |
Frequently Asked Questions - TruSense 3050-VASC10 KIDDE
How do I install the Kidde TruSense 3050-VASC10 smoke detector?
Installation involves mounting the base to the ceiling or wall with screws (provided), twisting the detector onto the base, and pulling the battery tab. For detailed steps, refer to the user manual.
What does the hush feature do?
The hush feature temporarily silences nuisance alarms (e.g., from cooking) by pressing the test/hush button. The detector will automatically reset after 8-10 minutes. Voice alerts will indicate 'Hush Activated'.
How do I test the smoke detector?
Press and hold the test button for 5 seconds until the alarm sounds. Release the button. If it does not sound, clean the detector and retest. Perform a test weekly.
What does it mean when the smoke detector chirps?
A chirp every 30-40 seconds typically indicates a low battery or end-of-life. Since this model has a sealed 10-year battery, a chirp pattern may signal the unit needs replacement. Check the manual for chirp patterns.
How do I clean the smoke detector?
Vacuum the vents monthly using a soft brush attachment to remove dust. Do not use water or cleaners. Avoid touching the sensor inside.
Can I connect multiple TruSense 3050-VASC10 detectors?
No, this model is a standalone unit and cannot be interconnected. For interconnected alarms, consider Kidde hardwired or wireless models.
How long does the battery last?
The sealed lithium battery lasts 10 years from activation. The detector will chirp when it needs replacement, and you must replace the entire unit.
What is the end-of-life warning?
After 10 years, the detector will emit 2 chirps every 30 seconds along with a voice alert saying 'Replace alarm' or similar. Replace the unit immediately.
Where should I place the smoke detector?
Install on the ceiling or high on a wall (within 6 inches of the ceiling). Avoid kitchens, bathrooms, garages, and areas with drafts. Follow local codes.
What should I do if the alarm goes off falsely?
First, ensure it's not a real fire. Use the hush button to silence. Clean the detector to remove dust or steam. Relocate if near a kitchen or bathroom. If false alarms persist, replace the unit.
User questions about TruSense 3050-VASC10 KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual TruSense 3050-VASC10 - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TruSense 3050-VASC10 by KIDDE.
USER MANUAL TruSense 3050-VASC10 KIDDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KIDDE
Model : TruSense 3050-VASC10
Category : Smoke detector