DALIMa 20Q - Uncategorized Ram Audio - Free user manual and instructions
Find the device manual for free DALIMa 20Q Ram Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Audio Amplifier |
| Brand | Ram Audio |
| Model | DALIMa 20Q |
| Power Output | 20,000 Watts (peak) |
| Channels | 4 independent channels |
| Frequency Response | 10 Hz – 20 kHz |
| Signal-to-Noise Ratio | > 110 dB |
| Input Impedance | 10 kΩ balanced |
| Output Impedance | 0.04 Ω |
| Cooling System | Variable speed fan, front-to-rear airflow |
| Protection Features | Short circuit, thermal, overload, DC offset |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Power Consumption | 2000 W (full load) |
| Dimensions (H x W x D) | 2U rackmount: 3.5 x 19 x 16 inches |
| Weight | 18 kg (39.7 lbs) |
| Main Functions | Amplification, bridging mode, parallel mode, high-pass filter |
| Cleaning and Maintenance | Clean exterior with dry cloth; ensure no dust on vents |
| Safety Warnings | Use grounded outlet; do not expose to rain or moisture |
| Spare Parts and Repairability | Service by qualified technician only; use genuine parts for replacement |
| General Information | Professional-grade amplifier for live sound and installation |
Frequently Asked Questions - DALIMa 20Q Ram Audio
How do I connect speakers to the DALIMa 20Q?
Use Speakon connectors on the rear panel for each channel. Ensure the amplifier is turned off before connecting or disconnecting speakers.
Can I bridge two channels for more power?
Yes, the DALIMa 20Q supports bridging. Set the mode switch to 'Bridge' and connect the speaker to the bridged output terminals. This doubles the power output.
What is the correct power cable for this amplifier?
Use a heavy-duty IEC C19 power cable rated for at least 15A. The amplifier requires a grounded outlet.
The amplifier goes into protect mode frequently. What should I do?
Check for shorted or faulty speaker cables, ensure load impedance is not below the minimum (2 ohms per channel in stereo, 4 ohms bridged). Also verify proper ventilation and that the unit is not overheating.
How do I clean the DALIMa 20Q?
Disconnect power. Wipe the front panel and chassis with a soft, dry cloth. Use compressed air to blow dust from the front ventilation grille and rear fan intake.
What is the minimum impedance per channel?
The amplifier is stable down to 2 ohms per channel in stereo mode and 4 ohms in bridge mode.
Can I use this amplifier in a 100V line system?
No, the DALIMa 20Q is a low-impedance amplifier designed for 2, 4, or 8 ohm speakers. It does not support 100V line transformers.
Does the unit have a built-in crossover?
Yes, each channel features a selectable high-pass filter (30 Hz or 50 Hz) to protect subwoofers and reduce low-frequency waste.
What is the correct rack mounting procedure?
Use the included rack ears and M5 screws. Ensure support brackets are used for heavy amplifiers. Allow at least 1U space above and below for ventilation.
How do I interpret the clip LED indicators?
The clip LEDs illuminate when the input signal is too high, causing distortion. Reduce the input level until the LED flashes only occasionally on peaks.
User questions about DALIMa 20Q Ram Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DALIMa 20Q - Ram Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DALIMa 20Q by Ram Audio.
USER MANUAL DALIMa 20Q Ram Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ram Audio
Model : DALIMa 20Q
Category : Uncategorized