SLA 350 - Laminating machine SENCOR - Free user manual and instructions
Find the device manual for free SLA 350 SENCOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Laminating Machine |
| Brand | Sencor |
| Model | SLA 350 |
| Max Laminating Width | 330 mm (A3 compatible) |
| Max Pouch Thickness | 250 microns |
| Warm-up Time | 3-5 minutes |
| Laminating Speed | 300 mm/min |
| Temperature Control | Adjustable, 80-160°C |
| Auto Shut-off | Yes |
| Cold Lamination | No (hot lamination only) |
| Reverse Function | Yes |
| Dimensions (W x D x H) | 450 x 150 x 100 mm |
| Weight | 1.5 kg |
| Power Consumption | 200 W |
| Voltage | 220-240 V, 50 Hz |
| Safety Features | Overheating protection, auto shut-off |
| Cleaning | Wipe with soft cloth; no solvents |
| Reparability | Contact authorized service center |
Frequently Asked Questions - SLA 350 SENCOR
What types of pouches can I use with the Sencor SLA 350?
The SLA 350 is designed for hot lamination pouches up to 250 microns thick. Use A3 or smaller pouches.
How long does it take to warm up?
The warm-up time is typically 3-5 minutes. The device is ready when the indicator light turns green.
What should I do if a pouch gets stuck?
Press the reverse button to clear the jam. If that fails, unplug the device and gently pull the pouch out. Avoid using sharp objects.
Can I laminate photos?
Yes, you can laminate photos. Ensure they are placed in a suitable pouch and avoid high temperatures that may damage them.
How do I clean the rollers?
Clean the rollers with a soft, dry cloth after the device cools down. Do not use water or solvents.
What does the temperature setting do?
Adjust the temperature to match the pouch thickness: lower for thin pouches, higher for thick pouches. Typical range is 80-160°C.
Does the device have auto shut-off?
Yes, the SLA 350 automatically shuts off after a period of inactivity to save energy and prevent overheating.
Can I use it for cold lamination?
No, this model is for hot lamination only. Cold lamination is not supported.
What is the maximum document width?
The maximum laminating width is 330 mm, suitable for A3 sized documents.
Where can I find a replacement or repair?
For repairs or replacement parts, contact Sencor authorized service centers. Do not open the device yourself.
User questions about SLA 350 SENCOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Laminating machine in PDF format for free! Find your manual SLA 350 - SENCOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SLA 350 by SENCOR.
USER MANUAL SLA 350 SENCOR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SENCOR
Model : SLA 350
Category : Laminating machine