HD 370 - Digital decoder MEGASAT - Free user manual and instructions
Find the device manual for free HD 370 MEGASAT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Decoder |
| Brand | Megasat |
| Model | HD 370 |
| Dimensions (W x D x H) | 200 x 150 x 40 mm |
| Weight | 0.5 kg |
| Power Supply | DC 12V, 1A |
| Power Consumption | < 12 W |
| Tuner Type | DVB-S2 |
| Video Output | HDMI, SCART |
| Audio Output | Digital (S/PDIF), Analog |
| Resolution | 1080p, 720p, 576p |
| USB Port | 1 x USB 2.0 |
| Media Playback | MPEG-2, MPEG-4, H.264 |
| Channel List | Up to 10,000 channels |
| Language Support | Multi-language OSD |
| Electronic Program Guide (EPG) | Yes |
| Parental Control | Yes |
| DiSEqC Support | 1.0, 1.2, USALS |
| Operating Temperature | 0°C to 45°C |
| Maintenance | Wipe with dry soft cloth; avoid liquids |
| Safety | Keep away from moisture and heat sources |
| Spare Parts | Remote control, power adapter available |
| Repairability | User-replaceable fuse; professional service for other repairs |
Frequently Asked Questions - HD 370 MEGASAT
How do I connect the Megasat HD 370 to my TV?
Use an HDMI cable for best quality, or a SCART cable if HDMI is unavailable. Connect the power adapter and the satellite cable to the LNB input.
How do I scan for channels?
Go to the Installation menu, select Satellite Setup, choose your satellite (e.g., Astra 19.2E), and start Automatic Scan. Ensure your dish is correctly aligned.
Can I record programs?
The HD 370 does not have built-in recording. However, you can connect a USB storage device to watch recorded media or timeshift (if supported via firmware).
Why is there no signal?
Check the satellite cable connection, dish alignment, and LNB settings. Ensure the correct satellite is selected in the menu. Also verify the DiSEqC configuration if using multiple LNBs.
How do I update the firmware?
Download the latest firmware from the Megasat website to a USB stick. Insert it into the decoder, go to System Update in the menu, and follow on-screen instructions.
The remote control is not working. What should I do?
Check the batteries and replace if needed. Ensure there are no obstacles between the remote and the decoder. Point the remote directly at the IR receiver. If still not working, try resetting the decoder.
How do I reset the decoder to factory settings?
Go to Settings > Factory Reset. Confirm the action. Note: this will delete all channels and personal settings.
How can I improve the signal quality?
Adjust the dish alignment for maximum signal strength and quality. Use a quality coaxial cable and ensure the LNB is working. Avoid long cable runs.
Can I use the HD 370 with a motorized dish?
Yes, support for DiSEqC 1.2 and USALS allows control of a motorized dish. Configure the motor settings in the installation menu.
What file formats are supported via USB?
The decoder supports MPEG-2, MPEG-4, H.264 video, and MP3, AAC audio. Subtitle formats like SRT may also be supported. Refer to the manual for full compatibility.
User questions about HD 370 MEGASAT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Digital decoder in PDF format for free! Find your manual HD 370 - MEGASAT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HD 370 by MEGASAT.
USER MANUAL HD 370 MEGASAT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MEGASAT
Model : HD 370
Category : Digital decoder