FSMA 905 - Range hood FRANKE - Free user manual and instructions
Find the device manual for free FSMA 905 FRANKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Franke |
| Model | FSMA 905 |
| Product type | Cooker hood |
| Width | 90 cm |
| Depth | 50 cm |
| Height | 60-120 cm (variable depending on installation) |
| Net weight | 15 kg |
| Power supply | 230 V / 50 Hz |
| Power consumption | 200 W |
| Max. air flow | 650 m³/h |
| Max. noise level | 65 dB(A) |
| Energy class | A+ |
| Lighting | LED (2 x 3 W) |
| Control type | Touch screen |
| Number of speeds | 4 + intensive |
| Grease filter | Dishwasher-safe metal filter |
| Charcoal filter (optional) | Regenerable or disposable filter depending on model |
| Evacuation mode | External evacuation or recirculation |
| Outlet diameter | 150 mm |
| Installation | Wall-mounted or island |
| Repairability index | 7.5 / 10 |
| Warranty | 2 years (parts and labor) |
| Maintenance and cleaning | Clean the grease filters every month; replace the charcoal filter every 6 to 12 months. |
| Safety | Automatic shut-off, motor anti-slip, thermal protection |
Frequently Asked Questions - FSMA 905 FRANKE
How to clean the grease filters of the Franke FSMA 905 hood?
The metal filters can be washed in the dishwasher at low temperature (50°C) or by hand with hot water and degreaser. Dry them well before reinstalling.
What is the recommended installation height for the FSMA 905 hood?
For gas cooking, install the hood at least 65 cm above the cooktop; for electric or induction cooking, 55 cm is sufficient.
How to replace the charcoal filter of the hood?
Unclip the grease filter, then remove the used charcoal filter. Insert the new filter by aligning the notches and put the grease filter back. Change it every 6 to 12 months depending on usage.
The hood makes an abnormal noise, what should I do?
Check that the filters are not clogged. Clean them if necessary. Make sure the exhaust ducts are not bent or blocked. If the noise persists, contact customer service.
Can the hood be used in recirculation mode without an external duct?
Yes, the Franke FSMA 905 hood is compatible with recirculation. You must install a recirculation kit including an activated charcoal filter (sold separately).
How to turn on the hood lighting?
Press the lighting button (bulb icon) on the touch panel. The LED lighting turns on or off. You can also hold the button to adjust the brightness.
What is the lifespan of the LED bulbs?
The integrated LED bulbs have a lifespan of approximately 30,000 hours. In case of failure, contact customer service for replacement.
The supplied remote control does not work, what should I do?
Check the batteries (type CR2032) and replace them if necessary. Make sure there is no obstacle between the remote and the hood. If the problem persists, reset the connection by following the instructions.
What are the operating modes of the intensive speed?
The intensive speed (boost mode) operates for 10 minutes then automatically returns to the previous speed. It quickly removes odors and steam.
Where to find spare parts for the Franke FSMA 905 hood?
Spare parts are available from Franke authorized dealers or on the official website. Use the part reference (e.g., charcoal filter 890900210) to facilitate ordering.
User questions about FSMA 905 FRANKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual FSMA 905 - FRANKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FSMA 905 by FRANKE.
USER MANUAL FSMA 905 FRANKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FRANKE
Model : FSMA 905
Category : Range hood