Reel PRO GL100 - Measuring equipment Ermenrich - Free user manual and instructions
Find the device manual for free Reel PRO GL100 Ermenrich in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Laser Distance Meter |
| Brand | Ermenrich |
| Model | Reel PRO GL100 |
| Measurement Range | Up to 100 meters |
| Accuracy | ±1.5 mm |
| Laser Class | Class 2, < 1 mW |
| Power Supply | 2 x AAA batteries |
| Battery Life | Up to 5000 measurements |
| Dimensions | 120 x 55 x 28 mm |
| Weight | 100 g (with batteries) |
| Display | Backlit LCD, 4-line display |
| Measurement Units | m, ft, in, ft+in |
| Functions | Distance, area, volume, Pythagorean, continuous measurement, min/max tracking, memory |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Dust/Water Protection | IP54 (splash-proof) |
| Included Accessories | Carrying pouch, 2 x AAA batteries, manual |
| Maintenance | Clean lens with soft, dry cloth; avoid solvents |
| Safety Precautions | Do not stare into laser beam; avoid eye exposure |
| Spare Parts & Repairability | Contact authorized service center for repairs; no user-serviceable parts |
| Country of Origin | China |
| Certifications | CE, FDA (for laser) |
Frequently Asked Questions - Reel PRO GL100 Ermenrich
How do I turn on the Ermenrich Reel PRO GL100?
Press the MEAS button to turn on the device. It will automatically enter measurement mode.
What type of batteries does it use?
The device uses two AAA batteries (1.5V, alkaline recommended). Insert them with correct polarity as shown in the battery compartment.
How do I measure a distance?
Press MEAS to activate the laser. Aim at the target and press MEAS again to take the measurement. The distance will be displayed on the screen.
Can I measure in feet and inches?
Yes. Press the UNIT button to cycle through available units: meters (m), feet (ft), inches (in), and feet+inches (ft+in).
What is the maximum measurement range?
The maximum range is 100 meters (328 feet) under ideal conditions (good visibility, suitable target). Actual range may vary based on lighting and target reflectivity.
How do I clean the lens?
Use a soft, dry cloth to gently wipe the lens. Do not use any liquids or abrasives as they may damage the lens coating.
Is the laser safe for eyes?
The device emits a Class 2 laser (< 1 mW). Avoid staring directly into the beam. Do not point the laser at people or animals.
Why is my measurement inaccurate?
Accuracy can be affected by environmental conditions (bright sunlight, reflective surfaces) or improper aiming. Ensure the device is steady and the target is perpendicular to the laser.
How do I replace the batteries?
Slide off the battery cover on the back. Remove old batteries and insert new ones following the +/- polarity markings. Reattach the cover.
What does the error code 'Err' mean?
'Err' indicates a measurement error, often due to a weak signal or target too far/too close. Check the target surface and ambient light, then try again.
User questions about Reel PRO GL100 Ermenrich
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual Reel PRO GL100 - Ermenrich and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reel PRO GL100 by Ermenrich.
USER MANUAL Reel PRO GL100 Ermenrich
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ermenrich
Model : Reel PRO GL100
Category : Measuring equipment