316.299372 - Vacuum Cleaner Craftsman - Free user manual and instructions
Find the device manual for free 316.299372 Craftsman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Craftsman |
| Model | 316.299372 |
| Product Type | Upright Vacuum Cleaner |
| Dimensions (L x W x H) | 12 x 12 x 48 inches |
| Weight | 15 lbs |
| Power Source | 120V AC, 60Hz, 12 Amps |
| Cord Length | 30 feet |
| Dust Cup Capacity | 2.5 liters |
| Filtration Type | HEPA |
| Suction Power | 200 air watts |
| Cleaning Path Width | 15 inches |
| Brush Roll Control | On/Off with foot pedal |
| Attachments Included | Crevice tool, dusting brush, upholstery tool |
| Noise Level | 70 dB |
| Cord Rewind | Automatic |
Frequently Asked Questions - 316.299372 Craftsman
How do I change the vacuum bag?
Turn off and unplug the vacuum. Open the bag compartment door, remove the full bag by pulling the cardboard collar, and insert a new Craftsman type Q bag until it clicks. Close the door securely.
How to clean the HEPA filter?
Remove the filter from the unit. Tap it gently over a trash can to remove loose dust. For deep cleaning, rinse with cold water until water runs clear. Allow to air dry completely for 24 hours before reinstalling.
My vacuum loses suction. What should I check?
First, check if the bag is full and replace if needed. Then inspect the hose for clogs: disconnect and run a broom handle through it. Also clean or replace the HEPA filter. Ensure the brush roll is free of hair and debris.
How to rewind the power cord?
Hold the plug firmly, then press the cord rewind button located on the back of the vacuum. Guide the cord evenly as it retracts to avoid tangles. Do not let the plug whip around.
What attachments come with the vacuum?
The vacuum includes a crevice tool for tight spaces, a dusting brush for delicate surfaces, and an upholstery tool for furniture. Attach them to the hose or wand as needed.
How often should I replace the belt?
Replace the brush roll belt every 6 months or if you notice the brush roll not spinning properly. Use a genuine Craftsman belt (part number 316.299371) for best performance.
The brush roll stopped spinning. What is wrong?
Unplug the vacuum and check if the brush roll is jammed with hair or debris. Also check the belt for breakage or stretching. If the belt is loose or broken, replace it. Ensure the brush roll on/off switch is in the 'on' position.
How to maintain the vacuum?
Regularly empty the dust cup or replace the bag when full. Clean the HEPA filter every 3 months. Check the brush roll for tangled hair and remove it. Inspect the hose for blockages. Wipe the exterior with a damp cloth.
What is the warranty period?
This Craftsman vacuum comes with a 2-year limited warranty against defects in materials and workmanship. Keep your receipt for service. Refer to the manual for warranty claim procedures.
Can I use the vacuum on hardwood floors?
Yes, the vacuum has a brush roll on/off switch. Turn off the brush roll when vacuuming bare floors to prevent scattering. Use the soft floor setting if available, or switch to hard floor mode.
User questions about 316.299372 Craftsman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual 316.299372 - Craftsman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 316.299372 by Craftsman.
USER MANUAL 316.299372 Craftsman
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Craftsman
Model : 316.299372
Category : Vacuum Cleaner