OSC04-IAW - Motion detector Leviton - Free user manual and instructions
Find the device manual for free OSC04-IAW Leviton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector (Occupancy/Vacancy Sensor) |
| Brand | Leviton |
| Model | OSC04-IAW |
| Detection Technology | Passive Infrared (PIR) |
| Coverage Angle | 360 degrees |
| Maximum Coverage Area | Up to 900 sq. ft. at 8 ft. mounting height |
| Mounting Type | Ceiling mount |
| Dimensions (Diameter x Height) | 4.2 in x 1.5 in |
| Weight | 2.4 oz |
| Input Voltage | 120-277 VAC, 50/60 Hz |
| Load Rating | 800W incandescent, 1/2 HP motor, 1000VA LED/CFL |
| Time Delay Settings | 30 seconds, 5 minutes, 15 minutes, 30 minutes |
| Ambient Light Sensor | Adjustable (daylight harvesting option) |
| Manual Override | Yes (manual-on/auto-off or auto-on/auto-off) |
| Wire Connections | Pigtail leads (Black, White, Red, Green) |
| Operating Temperature | 32°F to 131°F (0°C to 55°C) |
| Certifications | UL Listed, Title 24 compliant |
| Warranty | 5 years |
| Cleaning Instructions | Wipe with a dry cloth; do not use liquid cleaners |
| Safety | Disconnect power before installation; use approved wiring methods |
| Repairability | No user-serviceable parts; replace unit if defective |
Frequently Asked Questions - OSC04-IAW Leviton
What is the coverage area of the Leviton OSC04-IAW motion detector?
The sensor covers up to 900 sq. ft. with a 360-degree field of view when mounted at 8 ft. height.
How do I adjust the time delay?
Use the dial on the sensor to select among preset delays: 30 seconds, 5, 15, or 30 minutes.
Can I use this sensor with LED lights?
Yes, it is rated for up to 1000 VA of LED/CFL load.
Does the OSC04-IAW have a daylight sensor?
Yes, it includes an adjustable ambient light sensor for daylight harvesting.
What is the difference between occupancy and vacancy mode?
In occupancy mode, lights turn on automatically when motion is detected. In vacancy mode, lights must be turned on manually and turn off automatically when no motion is detected.
How do I install the motion detector?
Connect the black (line), white (neutral), red (load), and green (ground) wires using wire nuts, then mount to the ceiling. Ensure power is off.
What is the operating voltage?
It operates on 120-277 VAC, 50/60 Hz.
Can I use it with a dimmer?
This sensor is not designed for use with dimmers; use a compatible switch for dimming functions.
Why does the light stay on or not turn off?
Check the time delay setting, ensure the sensor is not blocked, and verify wiring connections. If the issue persists, the sensor may need replacement.
How do I clean the sensor?
Wipe with a dry, soft cloth. Avoid liquids or abrasive cleaners to prevent damage.
User questions about OSC04-IAW Leviton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual OSC04-IAW - Leviton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OSC04-IAW by Leviton.
USER MANUAL OSC04-IAW Leviton
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Leviton
Model : OSC04-IAW
Category : Motion detector