58GE130 - Grinder Graphite - Free user manual and instructions
Find the device manual for free 58GE130 Graphite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric garden shredder |
| Brand | Graphite |
| Model | 58GE130 |
| Motor power | 2 800 W |
| Voltage | 230 V / 50 Hz |
| Max cutting diameter | 40 mm |
| Collection bin capacity | 50 L |
| Dimensions (L x W x H) | 60 x 45 x 95 cm |
| Weight | 25 kg |
| Sound level | 96 dB (A) |
| Cutting system | Tempered steel rotating blade |
| Reverse shredding function | Yes |
| Safety switch | Emergency stop |
| Thermal protection | Yes |
| Transport wheels | 2 wheels |
| Maintenance | Clean after each use, annual blade sharpening |
| Spare parts available | Blades, belts, bins |
| Repairability | Repairability index 7.5/10 |
Frequently Asked Questions - 58GE130 Graphite
How to start the shredder?
Make sure the emergency stop switch is in the on position. Plug the device into a 230 V socket. Press the on/off button. Use the soft start button if available.
What branch diameter can the 58GE130 shred?
The shredder accepts branches with a diameter up to 40 mm. Beyond that, you risk damaging the motor or blades.
How to clean the shredder after use?
Unplug the device. Remove the collection bin. Use a stiff brush to remove plant residues from the blades and hopper. Never use water inside. Dry thoroughly before storing.
What to do if the blades jam?
Use the reverse shredding function (if available) to clear the branches. Otherwise, turn off and unplug the device, manually remove stuck branches while wearing protective gloves.
How often should I sharpen the blades?
The blades should be sharpened once a year or after 50 hours of use. Use a file or sharpening stone. If they are too worn, replace them.
The shredder makes an abnormal noise, what to do?
Check that the blades are not dull or damaged. Check the tightness of all screws. If the noise persists, contact customer service.
Can I shred wet green waste?
Yes, but avoid shredding too large amounts of very wet waste (like fresh grass) as it can clog the system. Mix them with dry branches if possible.
How to replace a blade?
Unplug the device. Remove the protective cover. Unscrew the damaged blade using a suitable wrench. Install the new blade respecting the rotation direction. Screw back and replace the cover.
Why does the circuit breaker trip when starting?
This may be due to an electrical overload. Check that the power cord is not damaged. If the problem persists, the motor may be faulty; have it checked by a professional.
Where to find spare parts for the 58GE130?
Spare parts (blades, belts, collection bins) are available from Graphite or authorized dealers. Use the model number to order.
User questions about 58GE130 Graphite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grinder in PDF format for free! Find your manual 58GE130 - Graphite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 58GE130 by Graphite.
USER MANUAL 58GE130 Graphite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Graphite
Model : 58GE130
Category : Grinder