VJP60 - Saw Vulcan - Free user manual and instructions
Find the device manual for free VJP60 Vulcan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Saw |
| Model | VJP60 |
| Brand | Vulcan |
| Power Source | Corded Electric |
| Power Rating | 1200 W |
| Blade Diameter | 190 mm |
| Max Cut Depth at 90° | 65 mm |
| Max Cut Depth at 45° | 45 mm |
| No-Load Speed | 5000 rpm |
| Weight | 3.5 kg |
| Dimensions (L x W x H) | 300 x 200 x 250 mm |
| Material Compatibility | Wood, Metal, Plastic |
| Safety Features | Blade Guard, Safety Switch, Overload Protection |
| Maintenance | Clean after each use, lubricate bearings, check carbon brushes |
| Spare Parts Available | Blades, Carbon Brushes, Power Cord, Guard |
| Repairability | User-serviceable parts: blade, brushes; professional service for motor |
| Included Accessories | One blade, rip fence, wrench, dust bag |
| Certification | CE, RoHS |
Frequently Asked Questions - VJP60 Vulcan
How do I change the blade on the Vulcan VJP60?
Unplug the saw. Press the spindle lock and use the wrench to loosen the bolt. Remove the outer flange and old blade. Install new blade with teeth facing forward, replace flange and bolt, and tighten.
What is the maximum cutting depth?
The maximum cutting depth at 90° is 65 mm and at 45° it is 45 mm.
Can I cut metal with this saw?
Yes, the VJP60 can cut metal if equipped with an appropriate metal cutting blade. Ensure to use a lower speed if possible.
How do I adjust the cutting angle?
Loosen the bevel adjustment knob, tilt the base to desired angle (0° to 45°), and tighten the knob securely.
What should I do if the saw stops working?
Check the power cord for damage, ensure the outlet works, and inspect the carbon brushes. If brushes are worn, replace them. If still not working, contact a service center.
How do I clean the saw?
Unplug the saw and wipe the exterior with a dry cloth. Use compressed air to blow dust from the vents and motor housing. Do not use water or solvents.
Is the saw compatible with a dust extraction system?
Yes, the VJP60 has a dust port that fits most standard vacuum hoses. Attach a vacuum to minimize dust.
What is the weight of the saw?
The saw weighs approximately 3.5 kg.
How often should I replace the carbon brushes?
Inspect brushes every 50-100 hours of use. Replace if they are shorter than 6 mm or show signs of wear.
Can I use a different brand of blade?
Yes, as long as the blade has a 190 mm diameter and a 20 mm arbor hole. Ensure it is rated for the saw's maximum speed.
User questions about VJP60 Vulcan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual VJP60 - Vulcan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VJP60 by Vulcan.
USER MANUAL VJP60 Vulcan
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vulcan
Model : VJP60
Category : Saw