AT-GAIN-60 - Receiver Atlona - Free user manual and instructions
Find the device manual for free AT-GAIN-60 Atlona in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HDMI Receiver / Distribution Amplifier |
| Brand | Atlona |
| Model | AT-GAIN-60 |
| Input Ports | 6 x HDMI (Female) |
| Output Ports | 1 x HDMI (Female) |
| HDMI Version | HDMI 2.0 |
| Maximum Resolution | 4K@60Hz (4:4:4) |
| HDCP Support | HDCP 2.2 |
| Dimensions (W x D x H) | 17.3 x 6.0 x 1.7 in (440 x 152 x 44 mm) |
| Weight | 2.2 lb (1.0 kg) |
| Power Supply | 100-240V AC, 50/60Hz, 12V DC 2A adapter |
| Power Consumption | 24W (max) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 20% to 90% RH (non-condensing) |
| Chassis Material | Metal, black finish |
| Mounting | Rackmount (1U) or desktop |
| Key Functions | Signal amplification, equalization, reclocking, EDID management |
| Maintenance | Keep vents clean; use dry cloth for cleaning; avoid liquids |
| Safety | Do not open; risk of electric shock; use only supplied adapter |
| Spare Parts / Repairability | Contact Atlona; no user-serviceable parts |
Frequently Asked Questions - AT-GAIN-60 Atlona
How do I reset the AT-GAIN-60 to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds until all LEDs flash. Release to restore defaults.
What should I do if there is no video output?
Check HDMI cables, ensure input source is powered, and verify EDID settings. Try a different input port or power cycle the unit.
Can the AT-GAIN-60 be mounted in a rack?
Yes, it is 1U rackmountable. Use the included rack ears and screws. Ensure adequate ventilation.
What is the maximum cable length supported?
For 4K@60Hz, up to 30 ft (10m) with a high-quality HDMI cable. For 1080p, up to 50 ft (15m). Use active cables for longer distances.
How do I switch between input sources?
Press the Input button on the front panel to cycle through inputs (1-6). The selected input LED will light up.
Does the unit support audio return channel (ARC)?
No, the AT-GAIN-60 does not support ARC. Use a separate audio connection if needed.
What does the EDID button do?
The EDID button allows you to copy EDID from the display to the source for optimal compatibility. Press to cycle through presets.
Is the power adapter included?
Yes, the unit comes with a 12V DC 2A power adapter. Use only the supplied adapter to avoid damage.
Can I control the unit via RS-232?
Yes, the AT-GAIN-60 has an RS-232 port for serial control. Refer to the manual for command protocol.
What should I do if the unit gets hot?
Ensure proper ventilation; do not block vents. The unit is designed to run warm. If overheating, reduce ambient temperature or check for dust.
User questions about AT-GAIN-60 Atlona
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual AT-GAIN-60 - Atlona and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-GAIN-60 by Atlona.
USER MANUAL AT-GAIN-60 Atlona
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atlona
Model : AT-GAIN-60
Category : Receiver