DIS-210G-12UP - NAS D-LINK - Free user manual and instructions
Find the device manual for free DIS-210G-12UP D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | NAS (Network Attached Storage) |
| Model | DIS-210G-12UP |
| Brand | D-Link |
| Dimensions (L x W x H) | 220 x 140 x 180 mm |
| Weight | 1.5 kg |
| Power Supply | 100-240V AC, 50-60Hz, External power adapter |
| Processor | Quad-core ARM Cortex-A55, 1.5 GHz |
| Memory (RAM) | 2 GB DDR4 |
| Drive Bays | 2x 3.5" SATA HDD/SSD |
| Maximum Capacity | Up to 32 TB (2 x 16 TB) |
| RAID Support | RAID 0, RAID 1, JBOD |
| Network Interface | 1x Gigabit Ethernet (RJ-45) |
| USB Ports | 2x USB 3.0 (front + rear) |
| File System | EXT4, Btrfs, FAT32, NTFS (external) |
| Supported Protocols | SMB/CIFS, NFS, AFP, FTP, WebDAV |
| Security | AES-256 encryption, user/group permissions, firewall |
| Backup Features | Time Machine, rsync, cloud backup (Google Drive, Dropbox) |
| Media Server | UPnP AV, DLNA, iTunes server |
| Management | Web-based UI, mobile app (MyDLink) |
| Operating Temperature | 0°C to 40°C |
| Humidity | 5% to 95% non-condensing |
| Maintenance & Cleaning | Clean with dry cloth; keep away from liquids and dust |
| Repairability | Hard drives and fan user-replaceable; internal components non-serviceable |
Frequently Asked Questions - DIS-210G-12UP D-LINK
How do I install hard drives in the D-Link DIS-210G-12UP?
Open the front panel, slide the drive tray out, place a 3.5-inch SATA drive, and secure with screws. Then insert tray back and close panel.
How to access the NAS from a computer?
Use the web interface at http://dis210g-12up.local or find the IP via D-Link's Qfinder utility. For file access, map a network drive using SMB/CIFS.
What RAID configurations are supported?
Supports RAID 0 (striping), RAID 1 (mirroring), and JBOD. RAID 1 is recommended for data redundancy.
How to perform a factory reset?
Press and hold the Reset button on the back for 10 seconds while the device is powered on. Wait for the status LED to blink, then release. The NAS will reboot to factory defaults.
Can I use the NAS as a media server?
Yes, the NAS supports DLNA and UPnP AV media streaming. Enable the media server in the web interface and your devices can stream movies, music, and photos.
How to update the firmware?
Download the latest firmware from D-Link support. Log into the web UI, go to System > Firmware Update, upload the file, and follow the prompts. Do not power off during update.
What backup options are available?
You can back up to external USB drives, use Time Machine for Macs, schedule rsync to another NAS, or sync with cloud services like Google Drive or Dropbox.
How to troubleshoot network connectivity?
Check Ethernet cable and ensure the router assigns an IP via DHCP. Try a different cable or port. In the web UI, verify network settings under Network > Interface. Restart the NAS if needed.
What is the power consumption?
Typical power consumption is around 15-25 watts under load, depending on hard drives. The NAS has a low-power sleep mode.
Can I use SSDs instead of HDDs?
Yes, the NAS supports 2.5-inch SATA SSDs (with adapter) or 3.5-inch SSDs. SSDs offer faster access and lower power consumption.
User questions about DIS-210G-12UP D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual DIS-210G-12UP - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DIS-210G-12UP by D-LINK.
USER MANUAL DIS-210G-12UP D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : DIS-210G-12UP
Category : NAS