Nuclias DNH-1000 - NAS D-LINK - Free user manual and instructions
Find the device manual for free Nuclias DNH-1000 D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Attached Storage (NAS) |
| Brand | D-Link |
| Model | Nuclias DNH-1000 |
| Dimensions (L x W x H) | 200 x 150 x 50 mm |
| Weight | 1.2 kg |
| Power Supply | DC 12V, 3A external adapter |
| Processor | Quad-core ARM Cortex-A55 |
| Memory | 2 GB DDR4 |
| Storage Bays | 2x 3.5" SATA III (hot-swap) |
| Max Storage Capacity | Up to 32 TB (2x 16 TB drives) |
| RAID Levels | JBOD, RAID 0, RAID 1 |
| Network Interface | 1x Gigabit Ethernet (RJ-45) |
| USB Ports | 2x USB 3.0 (Type-A) |
| Main Functions | File sharing, backup, DLNA media server, FTP server |
| Operating System | Nuclias OS (Linux-based) |
| Cooling | 1x 80mm fan (low noise) |
| Maintenance | Clean with dry cloth; avoid dust and moisture |
| Safety | Keep away from water and heat sources; use original adapter |
| Spare Parts | Power adapter, drive trays, screws |
| Repairability | User-replaceable drives and fan; contact support for other repairs |
| Warranty | 2 years limited |
| General Information | Desktop form factor; supports Windows, Mac, Linux |
Frequently Asked Questions - Nuclias DNH-1000 D-LINK
How do I access the D-Link Nuclias DNH-1000 from my computer?
Connect the NAS to your network via Ethernet. Use the Nuclias Finder utility or type the IP address in a web browser. Default login is admin/admin.
What RAID configurations are supported?
The DNH-1000 supports RAID 0 (striping), RAID 1 (mirroring), and JBOD. RAID 1 provides data redundancy.
Can I use SSDs instead of HDDs?
Yes, the DNH-1000 supports both 3.5-inch HDDs and 2.5-inch SSDs (with adapter) on SATA III interface.
How to set up a user account?
Log in to the web interface, go to Control Panel > Users, and create new users with specific permissions.
Does the NAS support remote access?
Yes, via the Nuclias Cloud service or manually configuring port forwarding on your router. Enable DDNS if needed.
What file systems are compatible?
The NAS uses EXT4 for internal drives. External USB drives can be in NTFS, FAT32, or EXT4.
How to perform a factory reset?
Press and hold the Reset button on the rear panel for 10 seconds until the power LED blinks. This restores factory defaults.
What is the power consumption?
Typical power consumption is around 15W with two HDDs installed, making it energy-efficient for 24/7 operation.
Can I schedule automatic backups?
Yes, use the built-in Backup Manager to schedule backups from a PC or USB drive to the NAS at specific times.
Is the device compatible with my router?
The DNH-1000 works with any standard router that has an Ethernet port. It automatically obtains an IP via DHCP.
User questions about Nuclias DNH-1000 D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual Nuclias DNH-1000 - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Nuclias DNH-1000 by D-LINK.
USER MANUAL Nuclias DNH-1000 D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : Nuclias DNH-1000
Category : NAS