CR-Play 10.2 - Dash cam Tracer - Free user manual and instructions
Find the device manual for free CR-Play 10.2 Tracer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dash Cam |
| Brand | Tracer |
| Model | CR-Play 10.2 |
| Dimensions | Approximately 10.2 x 5.5 x 3.5 cm |
| Weight | Approximately 150 grams |
| Power Supply | 5V DC via USB cable (car charger included) |
| Battery | Built-in rechargeable lithium battery |
| Recording Modes | Loop recording, G-sensor event detection, manual recording |
| Video Resolution | Full HD 1080p at 30 fps |
| Lens Angle | 170-degree wide angle |
| Night Vision | Built-in infrared LED for low-light recording |
| Storage | MicroSD card up to 128 GB (Class 10 or higher) |
| Display | 2.4-inch LCD screen |
| Connectivity | USB 2.0, AV-out |
| Maintenance | Clean lens with a soft, dry cloth. Avoid solvents. |
| Safety Precautions | Use only recommended SD cards. Keep away from extreme heat. |
| Spare Parts & Reparability | No user-serviceable parts. Contact Tracer support for repairs. |
| Languages Supported | Multiple including English, French, Spanish, German |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - CR-Play 10.2 Tracer
How do I install the dash cam on my windshield?
Clean the windshield area, attach the suction mount, and press firmly. Ensure the lens has a clear view of the road. Connect the power cable to the car charger.
What type of SD card should I use?
Use a MicroSD card with Class 10 or higher speed, up to 128 GB capacity. Format the card in the device before first use.
How does loop recording work?
When the SD card is full, the camera automatically overwrites the oldest footage. Critical events are locked and not overwritten if G-sensor is triggered.
How do I enable parking mode?
Connect the dash cam to a constant power source using the hardwire kit (sold separately). Enable parking mode in settings to record when motion is detected.
How can I view recorded footage?
You can view on the built-in LCD screen, or remove the SD card and use a computer. Alternatively, connect the camera to a TV via AV-out.
How do I reset the dash cam?
Use a paperclip to press the reset button located on the side or bottom of the device. This will restore factory settings.
What does the G-sensor do?
The G-sensor detects sudden impact or vibration. It automatically saves the current recording as an event file, which is protected from being overwritten.
Why is the camera not turning on?
Check if the power cable is securely connected. Try a different USB port or car charger. If battery is dead, charge it via USB for at least 2 hours.
How do I update the firmware?
Download the latest firmware from the Tracer website. Copy the file to a formatted SD card, insert into the camera, and power on. Follow on-screen instructions.
Can I use the dash cam while charging?
Yes, the dash cam operates normally while connected to power. It will continue recording even if the internal battery is low.
User questions about CR-Play 10.2 Tracer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dash cam in PDF format for free! Find your manual CR-Play 10.2 - Tracer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CR-Play 10.2 by Tracer.
USER MANUAL CR-Play 10.2 Tracer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tracer
Model : CR-Play 10.2
Category : Dash cam