6224 - Measuring equipment PeakTech - Free user manual and instructions
Find the device manual for free 6224 PeakTech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Digital Multimeter |
| Model Number | 6224 |
| Brand | PeakTech |
| Display Type | LCD with backlight |
| Maximum Voltage (AC) | 1000 V |
| Maximum Voltage (DC) | 1000 V |
| Maximum Current (AC) | 10 A |
| Maximum Current (DC) | 10 A |
| Resistance Range | Up to 40 MΩ |
| Capacitance Measurement | Yes, up to 100 µF |
| Frequency Measurement | Up to 1 MHz |
| Temperature Measurement | Yes, with thermocouple (not included) |
| Continuity Check | Yes, with audible buzzer |
| Diode Test | Yes |
| Safety Rating | CAT III 1000 V, CAT IV 600 V |
| Power Supply | 9V battery (not included) |
| Auto Power Off | Yes, after 15 minutes |
| Data Hold | Yes |
| Dimensions (approx.) | 190 x 90 x 48 mm |
| Weight (approx.) | 350 g (with battery) |
Frequently Asked Questions - 6224 PeakTech
How do I replace the battery in the PeakTech 6224?
Turn off the meter and remove the test leads. Unscrew the battery compartment screw on the back, slide off the cover, and replace the 9V battery with a new one. Reattach the cover and screw.
What is the maximum voltage I can measure with this multimeter?
The PeakTech 6224 can measure up to 1000 V in both AC and DC modes. Ensure you use the correct input jacks and select the proper range.
Does the PeakTech 6224 have a continuity test?
Yes, it has a continuity test with an audible buzzer. Turn the dial to the continuity/ohm position and touch the probes together to test.
How accurate is the PeakTech 6224?
Accuracy varies by function. For DC voltage, it is typically ±(0.5% + 2 digits). Refer to the manual for full specifications. It is suitable for general electronics and field use.
Can I measure temperature with this device?
Yes, but you need an optional thermocouple probe (type K). Plug it into the special input jack and select the temperature mode.
What does the 'Hold' button do?
The Data Hold button freezes the current reading on the display, allowing you to note it down even after removing the probes.
How do I measure DC current?
Set the dial to the DC current range (A with straight line). Connect the red lead to the 10A jack (for high current) or the mA jack, and the black lead to COM. Break the circuit and place the meter in series.
What is the auto power-off time?
The meter automatically turns off after 15 minutes of inactivity to save battery. Press any button to wake it up.
Is the PeakTech 6224 suitable for industrial use?
Yes, it is rated CAT III 1000V and CAT IV 600V, making it safe for most industrial and household electrical measurements.
Where can I download the manual for the PeakTech 6224?
You can download the PDF manual from notice-facile.com or the official PeakTech website. The manual includes detailed operating instructions, safety warnings, and specifications.
User questions about 6224 PeakTech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual 6224 - PeakTech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 6224 by PeakTech.
USER MANUAL 6224 PeakTech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PeakTech
Model : 6224
Category : Measuring equipment