DiGiGrid MGB - Uncategorized WAVES - Free user manual and instructions
Find the device manual for free DiGiGrid MGB WAVES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Audio Interface |
| Model | DiGiGrid MGB |
| Brand | Waves |
| Dimensions (HxWxD) | 44.5 x 483 x 200 mm |
| Weight | 2.1 kg |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 30W |
| Supported Sample Rates | 48 kHz, 96 kHz |
| Bit Depth | 24-bit |
| Audio Connections | 2x RJ45 (Dante), 1x BNC (Word Clock), 1x USB (Control) |
| Network Protocols | Dante, AES67 |
| Control Interface | Web interface, Waves SoundGrid |
| Main Functions | Bridge audio and control between Pro Tools HDX and Dante networks with low latency |
| System Requirements | Pro Tools HDX, Windows 10 or macOS 10.14+ |
| Maximum Channels | 128 |
| Included Accessories | Power cord, Ethernet cable, rack ears |
| Maintenance | Keep clean and dry; update firmware via web interface |
| Safety | Operate in ventilated area; do not block vents; use grounded outlet |
| Repairability | No user-serviceable parts; contact Waves support for service |
| General Information | Professional audio interface for studio and live environments; 1U rackmount |
Frequently Asked Questions - DiGiGrid MGB WAVES
How do I connect the DiGiGrid MGB to Pro Tools HDX?
Connect the Dante ports on the MGB to your network switch, then run a network cable from the switch to your Pro Tools HDX system. Use the Waves SoundGrid software to configure the bridge.
Can I use the MGB with other Dante equipment?
Yes, the MGB supports the Dante protocol and can interoperate with any Dante-enabled device, such as Yamaha consoles or other audio interfaces.
What do the LED indicators mean?
The front panel LEDs show Power (green), Link (green for connected), Activity (blinking), and Error (red). Refer to the manual for detailed status descriptions.
Does the MGB include an external power supply?
Yes, the unit comes with an external power brick that provides 100-240V AC to 12V DC. Ensure you use the supplied power supply for proper operation.
How do I update the firmware?
Access the web interface by entering the device IP in a browser. Under 'System' settings, you can upload the latest firmware file downloaded from Waves support.
What cables are needed for basic setup?
You need an Ethernet cable for network connection and the power cable. Optionally, a BNC cable for word clock sync if required.
Is the DiGiGrid MGB compatible with Windows and macOS?
Yes, it works with Windows 10 and macOS 10.14 or later. Install the Waves SoundGrid driver and control application.
How do I reset the MGB to factory defaults?
Press and hold the Reset button (located on the rear panel) for 10 seconds using a paperclip. The unit will restart with factory settings.
What is the warranty period?
Waves offers a 1-year limited warranty on the DiGiGrid MGB. Register your product online to extend the warranty to 2 years.
Why is the MGB not detected on my network?
Check that the Ethernet cable is securely connected and the switch port is active. Ensure your computer is on the same subnet. Use the SoundGrid Discovery tool to locate the device.
User questions about DiGiGrid MGB WAVES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DiGiGrid MGB - WAVES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DiGiGrid MGB by WAVES.
USER MANUAL DiGiGrid MGB WAVES
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WAVES
Model : DiGiGrid MGB
Category : Uncategorized