WRC-1 V2 - Uncategorized WAVES - Free user manual and instructions
Find the device manual for free WRC-1 V2 WAVES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Remote Control |
| Model | WRC-1 V2 |
| Brand | Waves |
| Dimensions (approx.) | 150 x 60 x 25 mm |
| Weight (approx.) | 120 g (without batteries) |
| Power Supply | 2 x AAA batteries (not included) |
| Operating Range | Up to 30 meters (line of sight) |
| Frequency Band | 2.4 GHz |
| Channels | 16 selectable channels |
| Compatible Devices | Waves receivers and mixing consoles |
| Main Functions | Remote control of volume, mute, transport |
| Indicators | LED status indicator (pairing, battery, signal) |
| Material | ABS plastic with rubber grip |
| Color | Black |
| Safety | Low voltage device, CE certified |
| Maintenance | Clean with a soft dry cloth; avoid liquids |
| Spare Parts | Replaceable battery compartment cover |
| Repairability | User-replaceable batteries only |
Frequently Asked Questions - WRC-1 V2 WAVES
How do I pair the WRC-1 V2 with a receiver?
To pair, press and hold the Pair button on the remote for 3 seconds until the LED flashes rapidly. Then press the Pair button on the receiver within 10 seconds. The LED will turn solid when successfully paired.
What batteries does it use and how long do they last?
The WRC-1 V2 uses 2 x AAA batteries (not included). Battery life is approximately 6 months with normal use. Replace when the LED flashes red.
What is the range of the wireless connection?
The operating range is up to 30 meters (100 feet) in open line-of-sight. Walls and obstacles may reduce range.
Can I use multiple WRC-1 V2 remotes with one receiver?
Yes, up to 4 remotes can be paired to a single receiver. Each remote must be paired individually.
The remote is not working. What should I check?
First, check the batteries and ensure correct polarity. Then verify that the remote is within range and paired. Try re-pairing. If the LED does not light, replace batteries.
Is the WRC-1 V2 compatible with all Waves devices?
It is compatible with Waves receivers that support the WRC protocol. Check your device manual for compatibility.
How do I clean the remote?
Use a soft, dry cloth to wipe the surface. Do not use water, solvents, or abrasive cleaners. Keep away from liquids.
What do the LED colors mean?
Solid green: paired and active. Flashing green: searching for connection. Solid red: low battery. Flashing red: pairing mode. Off: not powered.
Can I change the channel to avoid interference?
Yes, you can select one of 16 channels. Refer to the manual for channel selection procedure.
Where can I download the full user manual?
The user manual is available as a PDF download on the Waves website or on notice-facile.com. Search for 'WRC-1 V2 manual'.
User questions about WRC-1 V2 WAVES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual WRC-1 V2 - WAVES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WRC-1 V2 by WAVES.
USER MANUAL WRC-1 V2 WAVES
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WAVES
Model : WRC-1 V2
Category : Uncategorized