ANVR8 AI - VCR AIRLIVE - Free user manual and instructions
Find the device manual for free ANVR8 AI AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Brand | AirLive |
| Model | ANVR8 AI |
| Category | Video Recorder |
| Video Inputs | 8 Channels (IP cameras) |
| Recording Resolution | Up to 8MP per channel |
| Compression Format | H.265+/H.264+/H.265/H.264 |
| Storage Capacity | Supports 1 SATA HDD up to 10TB |
| AI Features | Human/vehicle detection, face recognition, intrusion detection |
| Network Interface | 1x Gigabit Ethernet (RJ-45) |
| Dimensions (W×D×H) | 300 × 250 × 50 mm |
| Weight | Approx. 2.0 kg (without HDD) |
| Power Supply | 12V DC, 2A |
| Power Consumption | ≤ 15 W (without HDD) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Warranty | 2 years limited warranty |
| Compliance | CE, FCC, RoHS |
| Maintenance | Keep vents unobstructed; clean casing with dry cloth; update firmware regularly |
| Safety Instructions | Use only supplied power adapter; avoid water and extreme temperatures |
| Spare Parts & Repairability | Hard drive user-replaceable; other repairs by authorized service only |
| General Information | Supports remote access via AirLive app; ONVIF compatible |
Frequently Asked Questions - ANVR8 AI AIRLIVE
How do I install a hard drive into the ANVR8 AI?
Open the case by removing screws on the bottom. Connect the SATA cable and power to the HDD, then secure it in the bay. Close the case and format the HDD through the system menu.
How to set up network access for remote viewing?
Connect the NVR to your router via Ethernet. Enable DHCP or set a static IP. Use the AirLive app or web browser to access by entering the device's IP address. Ensure port forwarding is configured on your router.
What AI features does the ANVR8 AI support?
It supports human and vehicle detection, face recognition, and intrusion detection. These can trigger alarms and recording events.
How can I reset the NVR to factory defaults?
Press and hold the reset button (located on the back panel) for 10 seconds while the device is powered on. Alternatively, go to System Settings > Factory Reset in the menu.
What is the maximum HDD storage supported?
The ANVR8 AI supports one SATA III hard drive up to 10TB.
How to update the firmware?
Download the latest firmware from AirLive's support website. Go to System Settings > Upgrade, upload the file, and follow on-screen instructions. Do not power off during update.
How to configure recording schedule?
Go to Recording > Schedule. Set time intervals for continuous, motion, or alarm recording. Apply the schedule to each camera individually.
How to connect IP cameras to the NVR?
Connect cameras via Ethernet to the same network. Use the auto-detect feature under Camera Management to add them. Enter camera credentials if prompted.
Why is there no video from my camera?
Check network cables, ensure camera is powered, and verify IP address conflict. Reboot the camera and NVR. Update camera firmware if necessary.
How do I enable face recognition alerts?
Go to AI Settings > Face Recognition. Enable the feature and upload a database of known faces. Set actions such as snapshot and email alert.
User questions about ANVR8 AI AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your VCR in PDF format for free! Find your manual ANVR8 AI - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ANVR8 AI by AIRLIVE.
USER MANUAL ANVR8 AI AIRLIVE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIRLIVE
Model : ANVR8 AI
Category : VCR