FE-200VD - Security Camera AIRLIVE - Free user manual and instructions
Find the device manual for free FE-200VD AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | AirLive |
| Model | FE-200VD |
| Video Resolution | 1080p Full HD (1920 x 1080) |
| Lens | Fixed focal length 3.6mm |
| Night Vision | IR LEDs with up to 20m range |
| Field of View | 80 degrees horizontal |
| Weatherproof Rating | IP66, suitable for outdoor use |
| Power Supply | 12V DC or PoE (802.3af) |
| Power Consumption | 5W maximum |
| Operating Temperature | -20°C to 50°C |
| Dimensions | 100mm x 90mm |
| Weight | 420g |
| Mounting | Ceiling or wall mount bracket included |
| Video Compression | H.264 |
| Motion Detection | Yes, configurable areas and sensitivity |
| Audio | Built-in microphone for audio monitoring |
| Local Storage | MicroSD card slot (up to 128GB) |
| Network Interface | Ethernet RJ45, 10/100 Mbps |
| Security | Password protection, HTTPS encryption |
| Care and Cleaning | Use a soft dry cloth to clean the housing and lens. Avoid chemical solvents and water. |
| Spare Parts and Repairability | Common spare parts (housing, lens module, IR board) available via authorized service centers |
| Default Access | Default IP address and login credentials provided in the manual |
| Warranty | Manufacturer warranty of 2 years |
Frequently Asked Questions - FE-200VD AIRLIVE
How do I reset the camera to factory defaults?
To reset the camera, press and hold the reset button on the device for about 10 seconds. The camera will restart and return to its factory default settings, including the default IP address and credentials.
What is the default IP address and login?
The default IP address is usually 192.168.1.100 with the username admin and password admin. Refer to the manual for the exact values.
How can I connect the camera to my network?
Connect the camera to your router or switch using an Ethernet cable. If your switch supports PoE, the camera will receive power over the same cable. Alternatively, use the included power adapter. Then use the bundled software or a web browser to access the IP address.
Does the camera support PoE (Power over Ethernet)?
Yes, the FE-200VD supports IEEE 802.3af PoE, allowing you to power the camera with a single network cable. This simplifies installation and reduces cable clutter.
How do I set up motion detection?
Access the camera's web interface, go to the Motion Detection settings, and enable it. You can draw detection regions, adjust sensitivity, and configure actions such as email alerts or recording to a microSD card.
Can I view the camera remotely from my smartphone?
Yes, the camera supports remote viewing via the dedicated mobile app or a web browser. Ensure port forwarding is configured on your router, or use the built-in P2P (Peer-to-Peer) functionality with a QR code for easy setup.
What type of memory card is supported for local recording?
The camera accepts microSD cards up to 128GB. Use a high-speed card (Class 10 or higher) for reliable video recording. Insert it into the slot on the camera body before powering it on.
How do I perform a firmware update?
Download the latest firmware from the AirLive website, save it to a microSD card or local storage, then go to the Firmware Upgrade page in the camera's web interface. Upload the file and wait for the camera to reboot automatically.
The camera is not showing video, what should I do?
First, check all physical connections: power and Ethernet. Verify the camera is powered on and the network LED is blinking. Try to ping the IP address from your computer. If the camera is unreachable, reset it and reconfigure. Ensure your browser supports H.264 or install the recommended plugin.
How do I clean the camera lens without damaging it?
Use a soft, lint-free microfiber cloth to gently wipe the lens and housing. If there is stubborn dirt, slight dampen the cloth with water or a specialized lens cleaner. Never use harsh chemicals, as they may scratch the lens or damage the protective coating.
User questions about FE-200VD AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual FE-200VD - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FE-200VD by AIRLIVE.
USER MANUAL FE-200VD AIRLIVE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIRLIVE
Model : FE-200VD
Category : Security Camera