R71CF-39 - Uncategorized ACTi - Free user manual and instructions
Find the device manual for free R71CF-39 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Model | R71CF-39 |
| Brand | ACTi |
| Dimensions | Approximately 120 mm (diameter) x 90 mm (height) |
| Weight | Approximately 0.5 kg |
| Power Supply | Power over Ethernet (PoE) IEEE 802.3af |
| Sensor | 1/2.8" Progressive Scan CMOS |
| Resolution | Up to 1920x1080 (Full HD) |
| Lens | Fixed focal length, 2.8 mm (typical) |
| Night Vision | Up to 30 meters (IR LEDs) |
| Video Compression | H.265, H.264, MJPEG |
| Field of View | Horizontal: ~100°, Vertical: ~55° |
| Weatherproof Rating | IP66 (indoor/outdoor) |
| Storage | MicroSD card slot (up to 128 GB), NVR support |
| Audio | Built-in microphone, audio line in/out |
| Network Interface | 10/100 Mbps RJ45 |
| Protocols | IPv4, IPv6, TCP, UDP, HTTP, HTTPS, RTSP, ONVIF |
| Motion Detection | Yes, configurable regions |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Certifications | CE, FCC, RoHS |
| Installation | Wall or ceiling mount included |
| Maintenance | Clean lens with soft cloth; avoid solvents |
| Repairability | Refer to manual for factory reset and parts replacement |
Frequently Asked Questions - R71CF-39 ACTi
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will reboot with default settings.
What power supply does the R71CF-39 require?
The camera supports Power over Ethernet (PoE) 802.3af. A PoE switch or injector is needed.
How can I access the camera remotely?
Connect the camera to your network, use the ACTi software or web browser via its IP address. For remote access, set up port forwarding or use ACTi Cloud.
What is the maximum resolution supported?
The camera supports up to 1920x1080 (Full HD) at 30 fps.
Does the camera support night vision?
Yes, it has built-in IR LEDs with a range of up to 30 meters for clear night vision.
How do I mount the camera?
Use the included bracket. Attach the bracket to the wall or ceiling, connect cables, and secure the camera. For detailed steps, refer to the manual.
What video formats are supported?
The camera supports H.265, H.264, and MJPEG compression for efficient storage and streaming.
Can I use a microSD card for local storage?
Yes, the camera has a microSD card slot supporting up to 128 GB for local recording.
Is the camera weatherproof?
With an IP66 rating, it is protected against dust and strong water jets, suitable for outdoor use.
How do I update the firmware?
Download the latest firmware from the ACTi website. Use the web interface to upload the file to the camera. Do not power off during update.
User questions about R71CF-39 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual R71CF-39 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. R71CF-39 by ACTi.