M315.002 - Saw DEDRA - Free user manual and instructions
Find the device manual for free M315.002 DEDRA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Saw |
| Brand | DEDRA |
| Model | M315.002 |
| Power Supply | 230V, 50Hz |
| Power Consumption | 1500 W |
| Blade Diameter | 185 mm |
| Max Cutting Depth | 50 mm at 90° |
| Bevel Capacity | 0° to 45° |
| No-Load Speed | 5000 rpm |
| Dimensions (L x W x H) | 35 x 25 x 20 cm |
| Weight | 4.5 kg |
| Housing Material | Aluminum and reinforced plastic |
| Safety Features | Blade guard, spindle lock, safety switch |
| Maintenance | Regularly clean blade and ventilation slots; lubricate moving parts |
| Replaceable Parts | Blade, carbon brushes |
| Repairability | Screws accessible; spare parts available |
| Included Accessories | Rip fence, wrench, dust bag |
| Noise Level | 95 dB(A) |
| Vibration Level | 2.5 m/s² |
Frequently Asked Questions - M315.002 DEDRA
How do I adjust the cutting depth on the DEDRA M315.002?
Loosen the depth adjustment lever located near the base plate, set the desired depth by moving the saw up or down, and tighten the lever securely. Always ensure the saw is unplugged before making adjustments.
What type of blade does the M315.002 use?
It uses a 185 mm diameter blade with a 20 mm arbor. Ensure the blade is rated for the material you are cutting, such as wood or metal.
How can I replace the carbon brushes?
Disconnect the saw from power. Locate the brush caps on the motor housing, unscrew them, and remove the old brushes. Insert new brushes (same size) and tighten the caps. Run the saw for a few minutes to seat the brushes.
Why is my saw not starting?
Check the power cord and plug for damage. Ensure the outlet is working. Verify the safety switch is not engaged. If the problem persists, the carbon brushes may be worn out or the motor may require service.
How do I clean and maintain the saw?
After each use, remove dust and debris from the blade guard and air vents with a brush or compressed air. Lubricate the pivot points with light oil periodically. Store in a dry place.
Can I cut metal with this saw?
Yes, by installing an appropriate metal-cutting blade. Reduce the cutting speed and use cutting oil to extend blade life. Wear appropriate safety gear.
What is the maximum bevel angle?
The saw can bevel up to 45 degrees. To adjust, loosen the bevel lock lever, tilt the base to the desired angle, and tighten the lever.
Is the blade guard removable?
The blade guard is a safety feature and should not be removed. If it is jammed, clean it and ensure it moves freely. Do not disable it permanently.
Where can I find spare parts?
Spare parts such as blades, carbon brushes, and screws are available from authorized DEDRA dealers or online marketplaces. Use the model number M315.002 for compatibility.
What does the spindle lock do?
The spindle lock holds the blade shaft stationary, allowing you to loosen or tighten the blade bolt with the wrench. Only engage it when the saw is unplugged.
User questions about M315.002 DEDRA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual M315.002 - DEDRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M315.002 by DEDRA.
USER MANUAL M315.002 DEDRA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DEDRA
Model : M315.002
Category : Saw