SHL 2000 A1 - Uncategorized SILVERCREST - Free user manual and instructions
Find the device manual for free SHL 2000 A1 SILVERCREST in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fan Heater |
| Brand | SilverCrest |
| Model | SHL 2000 A1 |
| Dimensions (W x H x D) | 30 x 40 x 20 cm |
| Weight | 2.8 kg |
| Power Supply | 230 V ~ 50 Hz |
| Power Consumption | 2000 W |
| Heat Settings | 2 power levels (1000 W / 2000 W) |
| Thermostat | Adjustable thermostat with comfort temperature |
| Fan Modes | Cool air fan function (no heat) |
| Safety Features | Overheat protection, tip-over switch, thermal cut-out |
| Housing Material | Flame-retardant plastic |
| Heating Element | Ceramic PTC |
| Noise Level | Approx. 45 dB (A) |
| Room Coverage | Up to 25 m² |
| Cleaning and Maintenance | Unplug and let cool; clean with dry cloth; do not submerge |
| Spare Parts Availability | Contact SilverCrest customer service |
| Repairability Index | Moderate (replaceable power cord and filter) |
| Certifications | CE, GS, WEEE |
| Included Accessories | Instruction manual only |
Frequently Asked Questions - SHL 2000 A1 SILVERCREST
How do I set the desired temperature on the SilverCrest SHL 2000 A1?
Turn the thermostat knob clockwise to increase the temperature or counterclockwise to decrease. The heater will automatically maintain the set temperature.
Can I use the fan function without heating?
Yes, set the mode switch to the fan-only position (usually indicated by a fan icon) to circulate cool air.
What should I do if the heater shuts off unexpectedly?
Check if the tip-over switch activated or if the overheat protection triggered. Allow the device to cool down, ensure it is on a stable surface, and try again. Also verify the power cord connection.
How often should I clean the heater?
Clean the exterior with a dry cloth every few weeks. For the inside, use a soft brush or vacuum cleaner on low suction once a season to remove dust.
Can I leave the heater unattended overnight?
It is not recommended to leave any heater unattended for extended periods. However, the SilverCrest SHL 2000 A1 features overheat protection and a tip-over switch for safety.
What is the maximum room size the heater can effectively warm?
The heater is suitable for rooms up to approximately 25 m² (about 270 sq ft) with good insulation.
How do I store the heater during summer?
Clean the heater, allow it to dry completely, and store it in a cool, dry place away from direct sunlight. You may cover it to prevent dust accumulation.
The heater makes a clicking noise when heating/cooling. Is this normal?
Yes, clicking noises are normal due to thermal expansion and contraction of the heating elements or thermostat relay operation.
Can I use an extension cord with the heater?
No, do not use an extension cord. Plug the heater directly into a wall outlet to avoid overheating and fire hazard.
Where can I obtain spare parts or service for my heater?
Contact SilverCrest customer service via the manufacturer's website or call their support line. Have your model number (SHL 2000 A1) ready.
User questions about SHL 2000 A1 SILVERCREST
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SHL 2000 A1 - SILVERCREST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SHL 2000 A1 by SILVERCREST.
USER MANUAL SHL 2000 A1 SILVERCREST
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SILVERCREST
Model : SHL 2000 A1
Category : Uncategorized