ITZ-MYLINK - Built-in kit ZZ-2 - Free user manual and instructions
Find the device manual for free ITZ-MYLINK ZZ-2 in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Kit |
| Brand | ZZ-2 |
| Model | ITZ-MYLINK |
| Dimensions (W x H x D) | 178 x 50 x 160 mm (Double DIN) |
| Weight | 0.5 kg |
| Power Supply | 12V DC (negative ground) |
| Audio Output Power | 4 x 50W max |
| Supported Media | USB, SD card, Bluetooth streaming, AUX |
| Display | 7-inch TFT LCD touchscreen |
| Radio Bands | FM/AM |
| Bluetooth Version | 5.0 with hands-free calling and audio streaming |
| USB Ports | 1 x USB-A (front) |
| SD Card Slot | 1 x MicroSD (front) |
| Steering Wheel Control | Compatible (with adapter) |
| Rear Camera Input | Yes (CVBS) |
| Maintenance | Clean with soft dry cloth; avoid liquids |
| Safety | Disconnect battery before installation; use provided screws and brackets |
| Spare Parts / Repairability | Contact ZZ-2 support or authorized dealer |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - ITZ-MYLINK ZZ-2
How do I install the ITZ-MYLINK built-in kit?
First, disconnect the car battery. Remove the old radio using appropriate removal tools. Connect the wiring harness to your vehicle's wires using solder or crimp connectors, matching colors as per the diagram. Slide the kit into the dash and secure with the provided screws. Reconnect battery and test.
Does this unit support Apple CarPlay or Android Auto?
No, the ITZ-MYLINK is a standard multimedia receiver that supports Bluetooth, USB, and SD playback but does not include CarPlay or Android Auto.
Can I connect a rearview camera?
Yes, the unit has a dedicated rear camera input (CVBS). Connect the camera's video cable to the RCA input labeled 'CAM IN'. Activate the camera function in the settings menu.
How do I pair my phone via Bluetooth?
Enable Bluetooth on your phone. On the unit, go to Bluetooth settings and select 'Search'. Select 'ZZ-2 ITZ-MYLINK' from the list. Confirm pairing when prompted. PIN is 0000 if required.
What is the screen resolution?
The display is a 7-inch TFT LCD with 800x480 pixel resolution.
The unit does not turn on. What should I check?
First, verify the car battery is connected and the ignition is in ACC position. Check the fuse on the unit's power wire (usually 10A). Ensure the wiring harness is properly connected, especially the constant 12V (yellow), switched 12V (red), and ground (black) wires.
Supported audio file formats?
The unit supports MP3, WMA, WAV, and FLAC files from USB and SD card, up to 32GB capacity formatted in FAT32.
How do I reset the unit to factory settings?
Press the reset button located near the SD card slot using a paperclip or similar tool. Alternatively, go to Settings > System > Factory Reset and confirm.
Is steering wheel control compatible?
Yes, if your vehicle has steering wheel audio controls, you can use an aftermarket adapter (e.g., PAC SWI-RC or similar) to connect to the unit's wired remote input (3.5mm jack). Configure in the settings menu.
What is the warranty period?
The ZZ-2 ITZ-MYLINK comes with a 1-year limited warranty covering manufacturing defects. Proof of purchase is required for claims.
User questions about ITZ-MYLINK ZZ-2
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Built-in kit in PDF format for free! Find your manual ITZ-MYLINK - ZZ-2 and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ITZ-MYLINK by ZZ-2.
USER MANUAL ITZ-MYLINK ZZ-2
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZZ-2
Model : ITZ-MYLINK
Category : Built-in kit