CYBEX

Pallas G2 - Car seat CYBEX - Free user manual and instructions

Find the device manual for free Pallas G2 CYBEX in PDF.

📄 700 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice CYBEX Pallas G2 - page 27
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Car seat
Brand Cybex
Model Pallas G2
Dimensions (H x W x D) 68 x 54 x 42 cm (approx.)
Seat weight 12 kg
Weight group Group 1/2/3 (9-36 kg)
Recommended age From 9 months to 12 years
Installation Isofix + Top Tether or seat belt
Child restraint 5-point harness (up to 18 kg) then vehicle seat belt
Adjustments Headrest 12 positions; recline 3 positions
Safety standard ECE R44/04
Cover Machine washable fabric at 30°C
Main features Grow-with-me seat with integrated side protection
Care Clean with soapy water; do not use solvents
Spare parts Available from Cybex customer service
Warranty 2 years

Frequently Asked Questions - Pallas G2 CYBEX

How to install the Pallas G2 seat with Isofix?
Place the seat on the bench, unfold the Isofix connectors until they click into the vehicle's anchors. Check the green indicators. Then attach the Top Tether to the designated anchor point. Consult the manual for detailed diagrams.
Until what age should I use the 5-point harness?
The 5-point harness is designed for children from 9 months to about 4 years (up to 18 kg). Once the child exceeds this weight or the harness height limit, use the vehicle's seat belt in booster mode.
Can I recline the seat to a lying position?
Yes, the Pallas G2 has 3 recline positions, including a rest position. To recline, pull the handle at the front of the seat and choose the desired angle. Do not exceed the recommended recline for the weight group.
How do I clean the seat cover?
The cover is removable and machine washable at 30°C. Use a gentle cycle and air dry. For stains, clean with a damp cloth and mild detergent. Never use bleach or solvent.
Is the Pallas G2 compatible with all vehicles?
The seat is compatible with most vehicles equipped with Isofix and Top Tether anchors. Check the compatibility list on the Cybex website or test the installation. Without Isofix, seat belt installation is possible.
What is the difference between the Pallas G and Pallas G2?
The Pallas G2 is an improved version with reinforced side protection, a wider headrest, and an improved recline system. Dimensions and safety standards remain similar.
Can I use the seat without the Isofix system?
Yes, the Pallas G2 can be installed with the vehicle's seat belt in belt mode. Follow the manual instructions for correct belt routing. Ensure the seat is securely locked.
How do I adjust the headrest height?
Pull the handle at the back of the headrest and slide up or down. There are 12 positions. The headrest should be adjusted so that the harness is at child's shoulder level.
When should I switch from the harness to the vehicle seat belt?
Switch to the seat belt when the child reaches 18 kg or when their eyes exceed the top of the headrest. Remove the harness and use the belt guide. The belt must pass through the red guides on the sides.
Where can I buy spare parts for the Pallas G2?
Contact Cybex customer service via their website or an authorized dealer. Parts such as Isofix connectors, harness, or cover are available. Have the seat serial number handy.

User questions about Pallas G2 CYBEX

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Car seat in PDF format for free! Find your manual Pallas G2 - CYBEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pallas G2 by CYBEX.

USER MANUAL Pallas G2 CYBEX

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CYBEX

Model : Pallas G2

Category : Car seat