CBT2312IRFW - Security Camera Costar - Free user manual and instructions
Find the device manual for free CBT2312IRFW Costar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Costar |
| Model | CBT2312IRFW |
| Resolution | 2 Megapixels (1920x1080) |
| Lens Type | Fixed focal length, 3.6mm (typical) |
| Infrared Range | Up to 30 meters |
| Video Compression | H.265 / H.264 |
| Power Supply | DC 12V ±10% |
| Power Consumption | ≤ 8W |
| Dimensions (WxHxD) | Approx. 200 x 80 x 80 mm |
| Weight | Approx. 500 g |
| Protection Rating | IP66 (weatherproof) |
| Storage | Micro SD card slot (up to 128 GB) |
| Network Interface | RJ45 10/100 Mbps |
| Mounting Type | Wall or ceiling mount |
| Main Functions | Motion detection, night vision, remote viewing |
| Maintenance and Cleaning | Clean lens with a soft, dry cloth; check cable connections periodically. |
| Safety Precautions | Disconnect power before cleaning; ensure secure mounting to prevent falls. |
| Spare Parts and Repairability | Contact Costar support for replacement parts; repair should be done by qualified personnel. |
| General Information | Compatible with Costar NVR and third-party ONVIF systems. |
Frequently Asked Questions - CBT2312IRFW Costar
How do I connect the CBT2312IRFW camera to my network?
Connect the camera to your router or switch using an Ethernet cable. Then use the Costar IP Finder tool or your NVR to locate the camera on the network. Default IP is usually 192.168.1.108.
Does this camera support Wi-Fi?
No, the CBT2312IRFW is a wired IP camera. It requires an Ethernet connection for power and data. For wireless setups, consider a Wi-Fi bridge.
What is the maximum night vision distance?
The camera has infrared LEDs with a range of up to 30 meters in complete darkness. Actual performance may vary based on environment.
Can I use a micro SD card for local recording?
Yes, insert a micro SD card (up to 128 GB) into the slot. Recording can be triggered by motion or scheduled. Format the card in the camera menu first.
How do I reset the camera to factory settings?
Press and hold the reset button (located near the cable) for about 10 seconds while the camera is powered on. The camera will reboot and restore defaults.
Is the camera compatible with third-party NVRs?
Yes, it supports ONVIF Profile S, making it compatible with many third-party NVRs. Ensure the NVR is ONVIF compliant and add the camera via IP address.
What is the video resolution and frame rate?
The camera streams up to 2 Megapixels (1920x1080) at 30 frames per second. Lower resolutions like 720p are also selectable.
How do I access the camera remotely?
Port forward ports 80 and 554 on your router, then use the Costar app or a web browser with your public IP. Enable UPnP for easier setup.
Does the camera support audio?
Yes, the CBT2312IRFW has a built-in microphone for audio capture. It does not have a speaker. Audio is transmitted via the network.
What is the warranty period for this camera?
Costar typically offers a 2-year limited warranty against defects. Register your product on the Costar website for support.
User questions about CBT2312IRFW Costar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual CBT2312IRFW - Costar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CBT2312IRFW by Costar.