CR4000XDI - Security Camera Costar - Free user manual and instructions
Find the device manual for free CR4000XDI Costar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Outdoor Security Camera |
| Model | CR4000XDI |
| Brand | Costar |
| Dimensions (W x H x D) | Approximately 70 x 70 x 150 mm |
| Weight | Approximately 0.5 kg (1.1 lbs) |
| Power Supply | 12V DC, PoE (IEEE 802.3af) |
| Power Consumption | Max 9W |
| Video Resolution | 4 Megapixels (2592 x 1520) |
| Frame Rate | 20 fps at 4MP |
| Lens | 2.8 - 12 mm motorized varifocal |
| Night Vision | Up to 30m with IR LEDs |
| Weatherproof Rating | IP66 |
| Operating Temperature | -30°C to 60°C (-22°F to 140°F) |
| Video Compression | H.265 / H.264 |
| Audio | Built-in microphone, audio output |
| Alarm Input/Output | 1 input, 1 output |
| Storage | Support microSD card up to 256GB, NVR |
| Mounting | Wall / Ceiling mounting bracket included |
| Material | Aluminum housing, IK10 rated |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - CR4000XDI Costar
How do I reset the Costar CR4000XDI to factory defaults?
Press and hold the reset button located near the Ethernet port for 10 seconds until the camera reboots. The default IP address will be 192.168.1.168.
What type of power supply does the CR4000XDI require?
The camera supports 12V DC (1A) and Power over Ethernet (PoE) IEEE 802.3af. Use either a compatible PoE switch or the included power adapter.
How can I access the camera remotely?
Download the Costar Pro app or use a web browser. Port forward the camera’s IP address on your router (default HTTP port 80, RTSP 554) or use P2P via the serial number.
The camera image is blurry, what should I do?
Clean the lens with a soft, dry cloth. Check the focus ring (if manual) or adjust the motorized zoom/focus via the web interface under Lens Settings.
Does the CR4000XDI support audio?
Yes, it has a built-in microphone and an audio output. Enable audio in the camera settings under Audio tab. Note that two-way audio requires an external speaker.
What is the maximum microSD card size supported?
The camera supports microSD cards up to 256GB (Class 10 or higher). Format the card to FAT32 using the camera’s web interface before use.
How do I update the firmware on the CR4000XDI?
Download the latest firmware from the Costar support website. Log into the camera web interface, go to System > Maintenance, and upload the firmware file. Do not power off during update.
Can I use the camera outdoors without a housing?
Yes, the CR4000XDI is rated IP66 weatherproof, so it can withstand rain and dust. Ensure the cable connections are also sealed to prevent moisture ingress.
The camera is not connecting to the network, what should I check?
Verify the Ethernet cable is securely connected and that the PoE switch or injector is working. Check the router’s DHCP client list for an IP address. If using PoE, the camera should power up immediately.
How do I clean the camera lens and housing?
Use a soft, lint-free cloth slightly dampened with water or a mild detergent. Avoid abrasive chemicals. Clean the IR window carefully to maintain night vision performance.
User questions about CR4000XDI Costar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual CR4000XDI - Costar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CR4000XDI by Costar.
USER MANUAL CR4000XDI Costar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Costar
Model : CR4000XDI
Category : Security Camera