EVOGT 10072D-S - Washing machine CANDY - Free user manual and instructions

Product Type	Freestanding Washing Machine
Model	EVOGT 10072D-S
Brand	Candy
Capacity	10 kg
Maximum Spin Speed	1200 rpm
Dimensions (H x W x D)	85 cm x 60 cm x 60 cm
Weight	72 kg
Power Supply	220-240 V ~ 50 Hz
Power Consumption	2200 W
Water Connection	Cold water only
Energy Efficiency Class	A+++
Noise Level (Wash/Spin)	56 dB / 76 dB
Number of Programs	16
Special Programs	Cotton, Synthetics, Delicates, Quick Wash, Eco, Wool, Hand Wash
Additional Features	Delay Start, Child Lock, LED Display, Drum Clean
Maintenance	Clean filter regularly, check inlet hose, run drum clean program monthly
Safety Features	Child lock, overfill protection, unbalanced load detection
Spare Parts Availability	Direct from Candy or authorized service centers

Frequently Asked Questions - EVOGT 10072D-S CANDY

How do I install the Candy EVOGT 10072D-S washing machine?

Ensure the machine is on a level, stable surface. Connect the water inlet hose to a cold water tap with 3/4 inch thread. Insert the drain hose into a standpipe or sink. Plug into a grounded outlet. Remove shipping bolts before first use.

What detergent should I use?

Use a high-efficiency (HE) detergent suitable for automatic washing machines. Dosage depends on water hardness, load size, and soil level. Refer to detergent packaging.

How to clean the detergent drawer?

Press the release button and pull out the drawer. Rinse under warm water and scrub compartment with a brush. Dry and reinsert. Clean monthly.

Why is my machine not draining?

Check if the drain hose is kinked or blocked. Clean the filter located at the bottom front. Ensure the pump is not jammed. Restart the machine after clearing.

How to run a drum clean cycle?

Select the 'Drum Clean' program (if available) or run a 90°C cotton cycle with a drum cleaner tablet. Do not add laundry. Repeat every 2 months.

What does error code E10 mean?

E10 indicates a water supply issue. Check that the water tap is open, the inlet hose is not kinked, and the filter at the hose connection is not blocked.

How to activate child lock?

Press and hold the 'Child Lock' button for 3 seconds until the lock icon appears. To deactivate, repeat. This prevents accidental button presses.

What is the maximum load for a quick wash?

For a quick wash (e.g., 30-minute cycle), do not exceed 2-3 kg of lightly soiled laundry to ensure effective cleaning.

How to level the washing machine?

Turn the adjustable feet at the bottom. Use a spirit level on top of the machine. Tighten lock nuts after leveling. Unevenness can cause vibrations.

Where to find spare parts?

Spare parts like hoses, filters, and door seals are available from Candy's official website or authorized service centers. Provide model number EVOGT 10072D-S.

USER MANUAL EVOGT 10072D-S CANDY

A PROGRAMME SELECTOR

Use this control to select the desired wash programme. Turn the selector (it can be turned in both directions) so that the programme is opposite the reference indicator (p). The temperature selected will depend on the programme. (See the Programme Table).

B1 SPIN SPEED SELECTOR

B2 DELAY START

C1 COLD WASH

C2 AQUAPLUS (SENSITIVE KEY)

G DOOR LIGHT

H START/PAUSE KEY

V “DIGITAL” Display

The display's indicator system allows you to be constantly informed about the status of the machine.

p CONTROL POSITION INDICATOR

“Gentle Touch Opening” is an innovative braking system enabling the washing machine to be loaded safely and easily. Thanks to the two buffers at each end, the drum can be opened in 2 seconds by lightly pressing the central key.

Programme table mod EVOGT 10072D

programme	programme	aprox. time for min.	max. temp. setting °C	spin speed rpm/min	max. load Kg.	washing powder load			option keys C
						I	II
KC55COTTONS	Fast coloureds with prewash display	90° 1000	7			•	•	•	•	•
	* Fast coloureds display 60° 1000				7		•	•	•	•
	* Fast coloureds display 40° 1000				7		•	•	•	•
	Delicate coloureds display 30° 1000				7		•	•	•	•
[6AAS]SYN	Fast coloureds	display	50°	1000		3	•	•	•	•
	Delicate coloureds	display	40°	1000	3		•	•	•	•
	Delicate coloureds	display	30°	1000	3		•	•	•	•
DELICATES	[H5AB] Woollens	display	30°	800		1	•	•	•
	Hand wash	display	30°	800		1	•	•	•
SPECIAL	[X802] Gentle rinse	display		1000				•		•
	[D403] Gentle spin	display		1000
	Empty	display		0
	EcoMix 20°C display		20°	800		7	•	•	•	•
	Fast 44	display	40°	1000		3	•	•	•
	Fast 30	display	30°	1000		2	•	•	•

* Cotton wash programme requirements according to (EU) 1015/2010 and 1061/2010 regulations

60°C

Cotton wash programme

40°C

Cotton wash programme

These wash programmes are recommended for soiled cotton fabrics and are the most effective in terms of both energy efficiency and water consumption.

These programmes have been designed to comply with the recommended wash temperatures specified on the labelling: the specified temperature may differ slightly from that indicated on the wash cycle.

Recommendations on the use of detergent at various temperatures.

When washing heavily soiled whites, we recommend using cotton programs of 60°C or above and a normal washing powder (heavy duty) that contains bleaching agents that at medium/high temperatures provide excellent results.

For washes between 40°C and 60°C the type of detergent used needs to be appropriate for the type of fabric and level of soiling.

Normal powders are suitable for “white” or colour fast fabrics with high soiling, while liquid detergents or “colour protecting” powders are suitable for coloured fabrics with light levels of soiling.

For washing at temperatures below 40°C we recommend the use of liquid detergents or detergents specifically labeled as suitable for low temperature washing.

For washing wool or silk, only use detergents specifically formulated for these fabrics.

For dosage amounts please follow the instructions on the detergent package label.

Programme	load	time	spin.	Energy cons.	Water cons.	remaining moisture
Cotton 60°C	7 kg / 3,5 kg	230min. /140min	1000Rpm kWh	1,20kWh /0,93kWh	52l /35 l	62%
Cotton 40°C	3,5 kg	130min. 0,71		35l 62%
Synthetics 40°C	3 kg	105min.	1000Rpm	0,49kWh	64l	50%
Woollens 30°C	1 kg	45min.	800Rpm	0,28kWh	50l	40%

Power consumption of the off-mode and of the left-on mode: 0.4 W / 0.6 W

IMPORTANT:

- Do not use liquid detergent for programs with a prewash cycle and/or timed start.

PREPARING THE WASH CYCLE

1. Once the washing is loaded, ensure that the drum doors are properly closed. 2. Add detergent and additives, not exceeding the maximum level indicator. • detergent for pre-wash I • detergent for wash programme II - fabric conditioner

SELECTING THE DESIRED PROGRAMMES AND OPTIONS

3. Turn the programme selector (A) to the desired programme. 4. Press the key or keys for any options desired (C1, C2). - It is advisable to select the required options before pressing the Programme Start key (H). - Remember that if the programme has already passed the stage at which an option is activated, that option will not be implemented.

C1 cold wash key

By pressing this button it is possible to transform every programme into a cold washing one, without modifying other characteristics (water level, times, rhythms, etc.).

Curtains, small carpets, man-made delicate fabrics, non-colour fast garments can be safely washed thanks to this new device.

C2 aquaplus (sensitive key)

Thanks to the new SENSOR ACTIVA SYSTEM, by pressing the key it is possible to run a special washing cycle applicable to all programs and types of fabric, caring for their fibres and the delicate skin of the users who use them.

Taking on much more water, together with the new combined action of drum rotation cycles and taking on and discharging water, allow you to obtain perfectly clean, rinsed clothes. More water is used in the wash to dissolve the detergent completely, ensuring an effective washing action. The water in the rinses has also been increased to eliminate all trace of detergent in the fibres.

This function has been specifically studied for people with delicate, sensitive skin, who can suffer irritation or allergy from the slightest detergent residue.

It is also advisable to use this function for children's clothes and delicate fabrics in general, especially for washing bathrobes, whose fibres tend to retain detergent.

This option is not available for the wool program.

5. Select spin speed if required (B1)

B1 spin speed

Once the programme has been selected, the maximum spin speed allowed for that programme appears on the display. Pressing the spin button will reduce the speed by 100 rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is possible to omit the spin by pressing the spin button repeatedly.

6.- To start the programme, once options have been chosen, press the key H. The washing machine will begin to operate. If you wish to cancel the option you have selected, press the key again. (The pilot light will go off.)

B2 delay start button

This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours.

To delay the start use the following procedure:

Set the required programme.

Press the button once to activate it (h00 appears on the display) and then press it again to set a 1 hour delay (h01 appears on the display); the pre-set delay increases by 1 hour each time the button is pressed, until h24 appears on the display, at which point pressing the button again will reset the delay start to zero.

Confirm by pressing the “START/PAUSE” button (the light on the display starts to flash). The countdown will begin and when it has finished the programme will start automatically.

It is possible to cancel the delay start by taking the following action:

Press and hold the button for 5 seconds until the display will show the settings for the programme selected.

At this stage it is possible to start the programme previously selected by pressing the “START/PAUSE” button or to cancel the process by setting the selector to the OFF position and then selecting another programme.

cycle duration (V)

When a programme is selected the display automatically shows the cycle duration, which can vary, depending on the options selected.

Once the programme has started you will be kept informed constantly of the time remaining to the end of the wash.

door light (G)

Once the START/PAUSE button has been pressed, the light first flashes, then stops flashing and remains on until the end of the wash.

Two minutes after the end of the wash, the light goes off to show that the door can now be opened.

Cancel/change programs

Once you have started a program and wish to change or cancel it, you should proceed in the following manner:

• Put the program selector in the OFF position. At that instant, you have cancelled the program and can, if you wish, select a new one.
• Select the new program.
• Press the key (H) again.

The washing machine will perform the newly selected program.

Program pause

It is possible to momentarily stop the wash program so that more washing can be added. To do so, proceed as follows:

• Hold down the (H) key until the option key lamps begin to flash and the time remaining indicator display and pilot lamp light up.
• When the Door Lock lamp goes out (after approximately 2 minutes), open the door and add the desired washing.
• Correctly close the doors of the drum and the outer cover.
• Press the key H, and the washing machine will continue with the program.

When the program has been completed, the message "END" will appear in the indicator display.

Wait until the Door Lock lamp (G) goes out (after approx. 2 minutes)

"To remove the washing, set the programme selector to the OFF position", before opening the washing-machine lid and the drum doors.