DAR026A2WDB - Refrigerator DANBY - Free user manual and instructions

Find the device manual for free DAR026A2WDB DANBY in PDF.

DANBY DAR026A2WDB - Refrigerator
📄 28 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice DANBY DAR026A2WDB - page 2
View the manual : Français FR English EN Español ES
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Compact Refrigerator
Brand Danby
Model DAR026A2WDB
Total Capacity 2.6 cu ft (approx. 74 L)
Dimensions (H x W x D) 59.7 x 44.5 x 48.3 cm
Net Weight approx. 19 kg
Power Supply 115 V ~ 60 Hz
Annual Energy Consumption approx. 220 kWh
Climate Class N (temperate): 16 °C to 32 °C
Temperature Adjustment Mechanical thermostat (7 positions)
Defrosting Manual (drip tray)
Interior Lighting Incandescent lamp (E14, 10 W)
Shelf Material Tempered glass
Number of Shelves 2 full + 1 half (for bottles)
Door Bins 3 bins (including 1 for 2 L bottles)
Crisper Drawer 1 transparent drawer
Reversible Door Yes (door swing can be reversed)
Noise Level ~ 42 dB(A)
Refrigerant R600a (isobutane) - 22 g
Maintenance Clean with soft cloth and mild soap; defrost regularly; check gaskets
Available Spare Parts Thermostat, lamp, shelves, bins, door gaskets (upon request)

Frequently Asked Questions - DAR026A2WDB DANBY

How do I adjust the temperature on my Danby DAR026A2WDB?
Turn the thermostat knob located inside the refrigerator. Positions 1 to 7 correspond to increasing coldness. The recommended position is 3 or 4 for a temperature of 4 °C.
The refrigerator makes a gurgling noise, is this normal?
Yes, this noise is normal. It comes from the circulation of refrigerant in the cooling circuit. The compressor may also produce a humming sound.
How do I reverse the door of the Danby DAR026A2WDB?
Unscrew the hinges, remove the door, and reverse the top and bottom hinge parts. Follow the diagram provided in the manual. Keep the screws for reassembly.
How often should I defrost my refrigerator?
Defrost when the frost layer reaches 5 mm thickness, usually every 2 to 3 months. Turn off the appliance, empty it, place a drip tray, and let the ice melt naturally.
Can I freeze food in this refrigerator?
No, the DAR026A2WDB is a simple refrigerator without a freezer compartment. It does not go below 0 °C. For freezing, use a dedicated freezer.
What should I do if the refrigerator stops cooling?
First check the power supply and that the outlet works. Make sure the thermostat is not set to '0'. Clean the condenser at the back. If the problem persists, contact a technician.
How do I clean the inside of my Danby DAR026A2WDB?
Unplug the appliance. Remove shelves and door bins. Wash them with warm soapy water. Wipe the interior with a damp cloth and baking soda to remove odors. Rinse and dry.
The interior light no longer turns on, how do I change it?
Unplug the refrigerator. Remove the light cover (usually clipped). Unscrew the defective bulb and replace it with a type E14 bulb, max 10 W. Replace the cover.
What is the power consumption of this refrigerator?
The estimated annual consumption is about 220 kWh, which corresponds to energy class A (according to the old classification). This may vary depending on usage.
Where can I find spare parts for Danby DAR026A2WDB?
Contact Danby customer service or an authorized dealer. You can also search online using the reference 'DAR026A2WDB'. Common parts such as the thermostat, shelves, or gaskets are available.

User questions about DAR026A2WDB DANBY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Refrigerator in PDF format for free! Find your manual DAR026A2WDB - DANBY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DAR026A2WDB by DANBY.

USER MANUAL DAR026A2WDB DANBY

CONTEMPORARY CLASSIC

COMPACT REFRIGERATOR

Owner's Manual....1 - 8

COMPACT REFRIGERATOR

Welcome to the Danby family. We are proud of our quality products and we believe in dependable service. We suggest that you read this owner's manual before plugging in your new appliance as it contains important operation information, safety information, troubleshooting and maintenance tips to ensure the reliability and longevity of your appliance.

Visit www.Danby.com to access self service tools, FAQs and much more. For additional assistance call 1-800-263-2629.

Note the information below; you will need this information to obtain service under warranty.

You must provide the original purchase receipt to validate your warranty and receive service.

Model Number: ____

Serial Number: ____

Date of Purchase: ____

Need Help?

Before you call for service, here are a few things you can do to help us serve you better.

Read this owner's manual:

It contains instructions to help you use and maintain your appliance properly.

If you receive a damaged appliance:

Immediately contact the retailer or builder that sold you the appliance.

Save time and money:

Check the troubleshooting section at the end of this manual before calling. This section will help you solve common problems that may occur.

Simple black-and-white icon of a telephone handset inside a circle (no text or symbols)

1-800-26- Danby

(1-800-263-2629)

DANBY DAR026A2WDB - Save time and money: - 2

Important Safety Information READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAFETY REQUIREMENTS

DANGER: Risk of fire or explosion. Flammable refrigerant used. Do not puncture refrigerant tubing.

  • Do not use mechanical devices to defrost refrigerator.
  • Ensure that servicing is done by factory authorized service personnel, to minimize product damage or safety issues.
  • If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified person in order to avoid hazard.
  • Consult repair manual or owner's guide before attempting to service this product. All safety precautions must be followed.
  • Dispose of properly in accordance with federal or local regulations. Follow handling instructions carefully.
  • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

WARNING: Do not damage the refrigerant circuit.

WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

CAUTION: Children should be supervised to ensure that they do not play with the appliance.

DANGER: Risk of child entrapment. Before throwing away an old appliance:

  • Remove the door or lid.
  • Leave shelves in place so that children may not easily climb inside.

DANGER: Do not add a lock to the door or lid. This can cause child entrapment and harm.

SAFETY REQUIREMENTS

This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities may be different or reduced, or who lack experience or knowledge, unless such persons receive supervision or training to operate the appliance by a person responsible for their safety.

This appliance is intended to be used in household and similar applications such as:

  • Staff kitchen areas in shops, offices and other working environments;
  • Farm houses and by clients in hotels, motels and other residential type environments; • Bed and breakfast type environments; • Catering and similar non-retail applications.

GROUNDING INSTRUCTIONS

This appliance must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire for the electrical current.

This appliance has a cord that has a grounding wire with a 3-prong plug. The power cord must be plugged into an outlet that is properly grounded. If the outlet is a 2-prong wall outlet, it must be replaced with a properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the appliance is designed for.

WARNING - Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or service agent if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

Do not connect your appliance to extension cords or together with another appliance in the same wall outlet. Do not splice the power cord. Do not under any circumstances cut or remove the third ground prong from the power cord. Do not use extension cords or ungrounded (two prongs) adapters.

INSTALLATION INSTRUCTIONS OPERATING INSTRUCTIONS

LOCATION

  • Two people should be used when moving the appliance.
  • Remove interior and exterior packaging prior to installation. Wipe the outside of the appliance with a soft, dry cloth and the inside with a lukewarm, wet cloth.
  • Place the appliance on a floor that is strong enough to support it when it is fully loaded.
  • Do not place the appliance in direct sunlight or near sources of heat, such as a stove or heater, as this can increase electrical consumption. Extreme cold ambient temperatures may also cause the appliance to perform improperly.
  • Do not use the appliance near water, for example in a wet basement or near a sink.
  • This appliance is intended for household use only. It is not designed for outside installation, including anywhere that is not temperature controlled (garages, porches, vehicles, etc.).
  • Before connecting the appliance to a power source, let it stand upright for approximately 6 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
  • This appliance is 44.9 cm (17.7 inches) wide by 68.5 cm (27 inches) high by 50.3 cm (19.8 inches) deep. Make sure that you leave the minimum amount of space between the appliance and all surrounding walls and vents.
  • Allow 12.7 cm (5 inches) of space between the back of the appliance and the wall. Allow 5 cm (2 inches) between the sides and top of the appliance and any walls or counter tops.
  • This appliance is intended for free-standing installation only and is not intended to be built into a cabinet or counter. Building in this appliance can cause it to malfunction.

FEATURES

  1. Glass Shelves
  2. Defrost Water Outlet: Ice that forms inside the appliance will automatically thaw and drain through this outlet.
  3. CANSTOR™ Door Liner: Holds 355ml cans of pop, juice, or beer.
  4. Bottle Rack: For tall, small and medium cans or jars.
  5. Magnetic Gasket: Tight fitting door seal keeps all the cooling power locked inside.
  6. Leveling Leg: Adjust so the unit is level.
  7. Thermostat Dial (not pictured)
  8. Interior Light (not pictured)

Diagram of a refrigerator interior with numbered compartments and labeled doors

OPERATING INSTRUCTIONS

THERMOSTAT DIAL AND INTERIOR LIGHT

The thermostat dial and interior light housing are located on the inner ceiling of the appliance.

TEMPERATURE SELECTION

The temperature of the appliance can be adjusted by turning the thermostat dial on the ceiling of the cabinet.

  • The larger, darker dots indicate the coldest setting.
  • The smaller, lighter dots indicate the warmest setting.
  • The "OFF" position will turn off the cooling function.

Internal temperature of the appliance can vary based on ambient temperature, the quantity of items stored and how frequently the door is opened.

INTERIOR LIGHT

The interior LED light will turn on when the door of the appliance is opened and will turn off when the door is closed.

If the interior light burns out, contact a Danby certified service technician to have it replaced.

Note: The functionality of the appliance is not affected if the light has burned out.

LEVELING INSTRUCTIONS

There is an adjustable leg on the bottom of the appliance that can be turned up or down to ensure that the appliance is level.

  1. Turn the leveling leg counter-clockwise until the top of the foot is touching the bottom of the cabinet.
  2. Slowly turn the leveling leg clockwise until the appliance is level.

OFF

Line drawing of a cabinet or enclosure with a recessed door and mounting bracket (no text or symbols)

Pure mechanical diagram showing a rotating component with three curved arrows indicating rotational motion (no text or symbols)

OPERATING INSTRUCTIONS

DOOR REVERSAL INSTRUCTIONS

If the appliance is placed on its back or side for any length of time during this process, it must be allowed to remain upright for 6 hours before plugging it in to avoid damage to the internal components.

  1. Remove the three screws from the back of the worktop. Lift the back of the worktop and pull it toward the front of the appliance to remove it. Remove the worktop hinge hole cover from the left side of the worktop and move it to the hinge hole on the right side of the worktop.
  2. Remove the door spindle cover that covers the hinge on the top left side of the door. Remove the hole cover from the top right side of the door. Removing the hole cover may require a flat blade screwdriver.
  3. Remove the upper hinge from the top right side of the cabinet. Remove the door from the cabinet.
  4. Remove the lower hinge hole cover from the bottom left side of the door and move it to the bottom right side of the door.
  5. Remove the adjustable foot and the lower hinge from the bottom right side of the cabinet. Remove the solid foot and screws from the bottom left side of the cabinet. Install the solid foot on the bottom right side of the cabinet. Install the lower hinge and the adjustable foot on the lower left side of the cabinet.
  6. Remove the hinge pin from the upper hinge. Flip the upper hinge over and install the hinge pin on the other side.
  7. Install the upper hinge and door onto the cabinet.
  8. Install the door spindle cover to cover the hinge on the top right side of the door. Install the hole cover in the hole on the top left side of the door.
  9. Install the worktop by laying it on top of the appliance and pushing it toward the back until it clicks into place and then reinstall the three screws at the back.

Note: When reinstalling the door, ensure that the top of the door is level with the top of the cabinet and that the rubber gasket makes a good seal with the cabinet all the way around.

①

Diagram showing a mechanical assembly with labeled components and directional arrows indicating motion or movement.

③

Technical line drawing of a mechanical assembly with no visible text or symbols

⑤

Pure mechanical diagram showing a bent bracket with two downward arrows and a numbered circle (6) in the top-left corner, no text or symbols present.

⑦

⑧

CARE & MAINTENANCE

CLEANING

Ensure the appliance is unplugged before cleaning.

  • To clean the inside of the appliance, use a soft cloth and a solution of a tablespoon of baking soda to one quart of water or some mild detergent.
  • Wash removable shelves in a mild detergent solution, then dry and wipe with a soft cloth.
  • Clean the outside with a soft, damp cloth and some mild detergent.
  • It is important to keep the area clean where the door seals against the cabinet. Clean this area with a soapy cloth. Rinse with a damp cloth and let dry.

Note: Do not use cleaners containing ammonia or alcohol on the appliance. Ammonia or alcohol can damage the appearance of the appliance. Never use any commercial or abrasive cleaners or sharp objects on any part of the appliance.

POWER FAILURE

Most power failures are corrected within a few hours and should not affect the temperature of the appliance if the door is kept closed as much as possible. If the power is going to be off for a longer period of time, take steps to protect the contents.

Note: Wait 3 to 5 minutes before attempting to restart the refrigerator if operation has been interrupted.

DEFROST

This appliance is equipped with an automatic defrost function and does not require manual defrosting. Defrost water from the appliance is channeled into a drip tray located above the compressor. Heat transfer from the compressor causes the defrost water to evaporate.

VACATION

  • Short vacations: Leave the appliance operating during vacations of less than three weeks.
  • Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.

MOVING

• Make sure the appliance is empty. - Secure the shelves inside the appliance with tape. - Turn the adjustable leg up to the base to avoid damage. - Secure the door with tape. - Be sure the appliance stays in the upright position during transportation. Protect the outside of the appliance with a blanket or similar item. - If the appliance is placed on its back or side during transportation, upon reaching the destination, allow it to remain upright for 6 hours before plugging in to avoid damage to internal components.

DISPOSAL

This appliance may not be treated as regular household waste, it should be taken to the appropriate waste collection point for recycling of electrical components. For information on local waste collection points, contact your local waste removal agency or government office.

Troubleshooting

Danby Consumer Care: 1-800-263-2629

Hours of operation:

Monday to Thursday 8:30 am - 6:00 pm Eastern Standard Time

Friday 8:30 am - 4:00 pm Eastern Standard Time

Information in this manual is subject to change without notice.

PROBLEM POSSIBLE CAUSE
No power • A fuse may be blown or the circuit breakertrippedPlug not fully inserted into the wall outlet
Internal temperature not cold enough • Temperature setting is too warmDoor is not shut properly or opened excessivelyExhaust vent is obstructedRecently added a large quantity of warm food to the cabinetClose proximity to heat source or direct sunlightAmbient temperature or humidity is very high
Appliance runs continuously • Temperature setting is too coldDoor not shut properly or opened excessivelyExhaust vent is obstructedRecently added a large quantity of warm food to the cabinetClose proximity to heat source or direct sunlightAmbient temperature or humidity is very high

Limited "Carry In" Warranty

This quality product is warranted to be free from manufacturer's defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer.

This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter "Danby") or by an authorized distributor of Danby, and is non-transferable.

Terms of Warranty

Plastic parts are warranted for thirty (30) days from the date of purchase, with no extensions provided.

First 18 months

During the first eighteen (18) months, any functional parts of this product found to be defective, will be repaired or replaced, at warrantor's option, at no charge to the original purchaser.

To obtain service

Contact the dealer where the unit was purchased, or contact the nearest authorized Danby service depot, where service must be performed by a qualified service technician. If service is performed on the unit by anyone other than an authorized service depot, all obligations of Danby under this warranty shall be void.

It is the responsibility of the purchaser to transport the appliance to the nearest authorized service depot.

Transportation charges to and from the service location are not covered by this warranty and are the responsibility of the purchaser.

Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS

Except as provided herein by Danby, there are no other warranties, conditions, representations, or guarantees, express or implied, made or intended by Danby or its authorized distributors, and all other warranties, conditions, representations, or guarantees, including any warranties, conditions, representations, or guarantees under any Sale of Goods Act or similar legislation or statute, are hereby expressly excluded. Except as provided herein, Danby shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused, or any consequential damages arising from the malfunction of the unit, and by the purchase of the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or property caused by the unit.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

1) Power failure. 2) Damage in transit or when moving the appliance. 3) Improper power supply such as low voltage, defective house wiring, or inadequate fuses. 4) Accident, alteration, abuse, or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions (i.e., extremely high or low room temperature). 5) Use for commercial or industrial purposes (i.e., if the appliance is not installed in a domestic residence). 6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods, etc. 7) Service calls resulting in customer education. 8) Improper installation (i.e., building-in of a free-standing appliance or using an appliance outdoors that is not approved for outdoor application, including but not limited to: garages, patios, porches, or anywhere that is not properly insulated or climate controlled).

Proof of purchase date will be required for warranty claims; retain bills of sale. In the event that warranty service is required, present the proof of purchase to our authorized service depot.

Warranty Service

Carry In

Danby Products Limited

PO Box 1778, Guelph, Ontario, Canada N1H 6Z9

Telephone: (519) 837-0920 FAX: (519) 837-0449

1-800-263-2629

04/17

Danby Products Inc

PO Box 669, Findlay, Ohio, U.S.A. 45840

Telephone: (419) 425-8627 FAX: (419) 425-8629

Welcome

1-800-26-Danby

(1-800-263-2629)

Diagram of a refrigerator with numbered compartments and storage racks, showing open and closed doors with labeled parts.

INSTRUCTIONS FOR USE

THERMOSTAT DIAL AND INTERIOR LIGHT

Pure mechanical diagram showing a rotating component with bidirectional arrows indicating motion (no text or symbols).

INSTRUCTIONS FOR USE

DOOR REVERSAL INSTRUCTIONS

③

Technical line drawing of a mechanical assembly with no visible text or symbols.

⑤

Pure mechanical diagram showing a bent bracket with arrows indicating direction, no text or symbols present.

⑦

⑧

CARE AND MAINTENANCE

CLEANING

Danby Products Limited

PO Box 1778, Guelph, Ontario, Canada N1H 6Z9

1-800-26-Danby (1-800-263-2629)

Diagram of a refrigerator interior with numbered compartments and labeled doors.

Danby Products Limited

PO Box 1778, Guelph, Ontario, Canada N1H 6Z9

Telephone: (519) 837-0920 FAX: (519) 837-0449

1-800-263-2629

04/17

Danby Products Inc.

PO Box 669, Findlay, Ohio, U.S.A. 45840

Telephone: (419) 425-8627 FAX: (419) 425-8629

NOTES / REMARQUES / NOTAS:

NOTES / REMARQUES / NOTAS:

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : DANBY

Model : DAR026A2WDB

Category : Refrigerator