IHTI 9.5 L B X - Range hood INDESIT - Free user manual and instructions
Find the device manual for free IHTI 9.5 L B X INDESIT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Extractor hood |
| Brand | Indesit |
| Model | IHTI 9.5 L B X |
| Width | 90 cm |
| Depth | 50 cm |
| Height (min-max) | 80 - 130 cm |
| Net weight | 12 kg |
| Power supply | 220-240 V ~ 50 Hz |
| Motor power | 220 W |
| Energy class | A+ |
| Lighting | LED, 2 x 3 W |
| Number of speeds | 3 + intensive |
| Max airflow | 650 m³/h |
| Max noise level | 65 dB(A) |
| Grease filter type | Metal, washable |
| Carbon filter (optional) | Yes, compatible |
| Control | Push buttons |
| Exhaust mode | Extraction or recirculation |
| Exhaust duct diameter | 150 mm |
| Grease filter maintenance | Every 30 days |
| Carbon filter replacement | Every 6 months |
| Thermal protection | Yes |
| Spare parts available | Filters, bulbs, motor |
Frequently Asked Questions - IHTI 9.5 L B X INDESIT
How to install the Indesit IHTI 9.5 L B X hood?
Installation must be carried out by a professional. The hood can be mounted on a wall or under a cabinet. Observe minimum distances: 65 cm above an electric hob and 75 cm above a gas hob. Use the drilling template provided.
How to clean the metal grease filters?
Metal grease filters can be cleaned in the dishwasher or by hand with hot water and detergent. Allow them to dry completely before reinstalling. Clean them every 30 days.
How to replace the LED bulb?
Turn off the power supply. Unclip the bulb cover. Replace the defective bulb with an LED bulb of the same type (G4, 3 W). Replace the cover and restore power.
The hood makes an abnormal noise, what to do?
Check that the hood is securely fixed and that no objects obstruct the fan. Clean the grease filters and duct. If the noise persists, contact after-sales service.
Can I use the hood without a carbon filter?
Yes, if you use the hood in extraction mode (air is expelled outside). The carbon filter is only needed in recirculation mode to filter odors.
How to activate intensive mode?
Press the intensive speed button (usually marked 'Boost' or a specific symbol). Intensive mode operates for 5 minutes and then automatically returns to the previous speed.
How often to change the carbon filter?
The carbon filter should be replaced every 6 months, or more often if the hood is used intensively. Do not wash it, it is not reusable.
The remote control no longer works, what to do?
Check the remote control batteries. Replace them if necessary. Ensure no obstacles block the signal. If the problem persists, reset the hood by unplugging and plugging the power back in.
Can I install the hood in recirculation mode?
Yes, you need to add a recirculation kit including a carbon filter. Follow the instructions in the manual for assembling the recirculation duct and installing the carbon filter.
What to do in case of failure or defective part?
Consult the 'Troubleshooting' section of the manual. Spare parts (filters, bulbs, motor) are available from Indesit customer service or on notice-facile.com. For complex repairs, call a certified professional.
User questions about IHTI 9.5 L B X INDESIT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual IHTI 9.5 L B X - INDESIT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IHTI 9.5 L B X by INDESIT.
USER MANUAL IHTI 9.5 L B X INDESIT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INDESIT
Model : IHTI 9.5 L B X
Category : Range hood