10AST - Carte de test électronique Daytronic - Free user manual and instructions
Find the device manual for free 10AST Daytronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Signal Conditioner / Transducer Amplifier |
| Dimensions (W x D x H) | 8.0 x 6.0 x 2.5 inches (approx.) |
| Weight | 0.5 kg (1.1 lbs) |
| Power Supply | 12 V DC, 200 mA (typical) |
| Input Channels | 1 differential analog input |
| Output Type | Analog voltage (0-10 V) or current (4-20 mA) |
| Bandwidth | DC to 10 kHz |
| Gain Range | 1 to 1000 (adjustable) |
| Filter Options | Low-pass filter, selectable cutoff frequencies |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Mounting | Bench-top or DIN rail mountable |
| Connectors | Screw terminals for input, output, and power |
| Indicators | Power LED, output status LED |
| Protection | Overvoltage and reverse polarity protection |
| Cleaning | Wipe with a dry, soft cloth. Do not use solvents. |
| Safety | Use only with specified power supply. Keep away from moisture. |
| Spare Parts | Contact Daytronic customer service for replacements. |
Frequently Asked Questions - 10AST Daytronic
How do I power the Daytronic 10AST?
Connect a 12 V DC power supply (200 mA minimum) to the power terminals. Observe correct polarity.
What input signals can the 10AST accept?
It accepts a differential analog voltage input from transducers like strain gauges, thermocouples, or pressure sensors.
How do I adjust the gain?
Use the onboard gain selection switch or jumper to set the amplification factor between 1 and 1000.
What output options are available?
The 10AST provides a 0-10 V or 4-20 mA output, selectable via jumper.
Can I use the 10AST with a 4-20 mA sensor?
Yes, it can condition a 4-20 mA loop signal. Ensure the input is configured accordingly and use an external resistor if needed.
How do I clean the device?
Wipe the exterior with a dry, soft cloth. Do not use liquids or abrasive cleaners.
What is the typical accuracy of the 10AST?
The accuracy is typically ±0.1% of full scale under normal operating conditions.
Does the 10AST have filter settings?
Yes, it includes a low-pass filter with selectable cutoff frequencies to reduce noise.
How do I troubleshoot if there is no output?
Check the power supply and connections. Verify the input signal is within range and the gain is set correctly. Ensure the output jumper is in the correct position.
Where can I find spare parts or repair service?
Contact Daytronic customer support with your device serial number for authorized service centers and spare parts.
User questions about 10AST Daytronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Carte de test électronique in PDF format for free! Find your manual 10AST - Daytronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 10AST by Daytronic.
USER MANUAL 10AST Daytronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Daytronic
Model : 10AST
Category : Carte de test électronique