LND7210R - Surveillance Camera LG - Free user manual and instructions

Product Type	Surveillance Camera
Brand	LG
Model	LND7210R
Camera Type	Dome
Resolution	2 MP (1920 x 1080)
Lens	3.6 mm fixed
Night Vision	Yes, up to 30 m (IR)
Power Supply	12 V DC or PoE (802.3af)
Dimensions (W x H x D)	10.0 x 10.0 x 8.0 cm
Weight	0.5 kg
Weatherproof Rating	IP66
Video Compression	H.264
Field of View	90° horizontal
Motion Detection	Yes
Audio	No
Storage	NVR compatible (not included)
Operating Temperature	-10°C to 50°C
Installation	Ceiling mount
Maintenance	Clean lens with a soft, dry cloth
Safety	Install in a dry, sheltered location
Spare Parts	Available from LG authorized service centers
General Information	Suitable for indoor and outdoor surveillance

Frequently Asked Questions - LND7210R LG

How do I reset the camera to factory defaults?

Press and hold the reset button (located on the camera body) for 10 seconds using a paperclip. The camera will reboot and restore default settings.

What is the night vision range?

The LND7210R features infrared LEDs providing night vision up to 30 meters in complete darkness.

Can I use this camera outdoors?

Yes, it is rated IP66, meaning it is dust-tight and protected against powerful water jets. Ideal for outdoor use under eaves.

What power supply is needed?

The camera supports 12V DC (2A) or PoE (Power over Ethernet) for easy installation.

Does the camera have Wi-Fi connectivity?

No, the LND7210R is a wired IP camera. It requires an Ethernet cable for data and power (if using PoE).

How do I mount the camera?

The camera comes with a ceiling mounting bracket. Secure the bracket to the ceiling, attach the camera, and adjust the angle as needed.

What is the field of view?

It has a 90° horizontal field of view, suitable for monitoring corridors and rooms.

Is there a mobile app to view the camera?

Yes, you can use LG's surveillance app (e.g., LG SmartView) to view live footage on your smartphone or tablet.

How do I clean the camera lens?

Gently wipe the lens with a soft, lint-free cloth. Avoid using harsh chemicals or abrasive materials.

What is the warranty period?

LG typically offers a 2-year limited warranty for surveillance cameras. Check your purchase receipt for details.

USER MANUAL LND7210R LG

Please read this manual carefully before operating your set and retain it for future reference.

MODELS

LNB7210 Series

LNB5110 Series

LND5110 Series

LNV7210 Series

LND7210 Series

LNV5110R Series

LND5110R Series

LNU5110R Series

LNV7210R Series

LND7210R Series

LNU7210R Series

Contents

Introduction....3

Features Chart....3

Operation and settings 4

Before using the system ....4

Recommended PC Requirements....4

Accessing the LG IP device....5

LG Smart Web Viewer Overview 6

Configuration menu overview....7

Configuring the LG Network Camera Device....7

Accessing the Configuration menu....7

System settings....8

Audio & Video settings....11

Network settings....20

User settings....23

Event settings....24

Reference 28

Troubleshooting....28

Open source software notice....29

Specifications....30

Introduction

The LG Network Camera is designed to use on an Ethernet network and must be assigned an IP address to make it accessible.

This manual contains instructions on how to install and manage the LG Network Camera in your networking environment. Some knowledge of networking environments would be beneficial to the reader.

Note that design and specification of this unit may change from the manual as quality and improvement without prior notice. Should you require any technical assistance, please contact authorized service center.

Features Chart

This table shows the differences between the models.

Item LNB7210 LNB5110
RS-485 Yes Yes
Zoom No No
Focus Auto Back Focus (ABF) No
External Day/Night Yes Yes

Item LND5110 LNV5110R LND5110R LNU5110R
RS-485	No	No	No	No
Zoom	Yes	Yes	Yes	Yes
Focus	Auto Focus	Auto Focus	Auto Focus	Auto Focus
External Day/Night	Yes	Yes	Yes	Yes

Item	LNV7210	LNV7210R	LND7210	LND7210R	LNU7210R
RS-485	No	No	No	No	No
Zoom	Yes	Yes	Yes	Yes	Yes
Focus	Auto Focus	Auto Focus	Auto Focus	Auto Focus	Auto Focus
External Day/Night	Yes	Yes	Yes	Yes	Yes

Operation and settings

Before using the system

• Before using the LG IP device make sure the connections are correct and verify whether proper power supply is used.
• Check the connections of the LG IP device for the correct conditions.
• Check that the LG IP device is(are) connected to the network and that power is supplied.
• Once the connections are made you need to install the LG client program to the PC from which you want to access the device. The LG Smart Web Viewer program is automatically installed when you connect the LG IP device.

The LVi510 and the LG Smart Web Viewer program are the network programs for the LG Video Server and the LG IP cameras.

• To view streaming video in Internet Explorer, set your browser to allow ActiveX controls. If you see the message "This website wants to install the following add-on: 'IPCam_Streamer.cab' from 'LG ELECTRONICS INC'", click the yellow bar and install the LG Smart Web Viewer program on your computer. Please set your browser zoom level to 100%.
• The Layouts and the Live view pages may differ depending on the operating system (OS) and web browser.
• Be careful not to run other applications while the Client Program is running, as it may cause memory shortage.
• When you set 60 fps in mobile applications, the frame rate may be degraded depending on mobile performance.

Recommended PC Requirements

The LG IP device can be used with most standard operating systems and browsers.

Items Requirements
Operating System	Windows XP Professional, Windows VISTA, Windows 7
CPU	Intel Core2 Quad Q6700 (2.66 GHz) or above
Web Browser	Microsoft Internet Explorer (32 bit) above the version 7.0 and below the version 9.0.
DirectX	DirectX 9.0c (Windows XP), DirectX 11 (Windows Vista/7) or above
Memory 2 GB or above RAM
Graphics Card 256	MB or above Video RAM
Resolution 2048 x 1536 (with 32 bit color) or higher

Note:

For Windows 7, please download and install 'DirectX End-User Runtime Web Installer'.

"http://www.microsoft.com/en-us/download/details.aspx?id=35"

Accessing the LG IP device

You can access the LG IP device by following the steps below.

1. Install LVi510 Program

It is recommended to use LVi510 for sure.

Otherwise, it is required to install the IP Utility

[Package>Tools>LG IP Utility Installer] to search the IP addresses of LG IP devices.

2. Discover the LG IP device using the IP Utility

The IP Utility can automatically discover and display LG IP devices on your network.

The IP Utility shows the MAC address, IP address, Model name and so on.

Note:

The computer running the IP Utility must be on the same network segment (physical subnet) as the LG IP device.

2.1 Run the IP Utility program.

2.2 Click the [Search] button or select the [Search] option in the Device search menu. After a few seconds the found LG IP devices gets displayed in the IP Utility window.

3. Logging in to the LG Smart Web Viewer

3.1 Run the IP Utility and find the LG IP devices.

3.2 When the LG IP devices appear in the IP Utility window, double-click IP address or right click on the same IP address and select "Connect to Web Page" to start the LG Smart Web Viewer. When accessing the LG Smart Web Viewer, the window for login will be shown. Select the language in drop-down list on right top of the window.

3.3 Enter the user name and password. (Note that the default administrator user name and password are "admin".)

Note:

Default password must be changed for security after initial connection.

Note:

- You can also access the LG Smart Web Viewer as shown below.

3.1 Start your web browser.

3.2 Enter the IP address of the LG IP device in the address bar of the browser.

3.3 Enter the user name and password set by the administrator.

- Check the browser's cookie settings to use the [Remember my credentials] option.

- If LG Smart Web Viewer requires an update, it may take more time to display depending on network conditions.

- If you connect to LG Smart Web Viewer for the first time, a Security Warning window will appear to install the LG Smart Web Viewer program. You must install the LG Smart Web Viewer program to use the LG IP device.

- If your computer or network is protected by a proxy or firewall, the proxy or firewall settings may prevent the LG Smart Web Viewer program from running. Adjust the proxy or firewall settings to enable the LG Smart Web Viewer program.

LG Smart Web Viewer Overview

Item Description
Change view sizeAUTO RESIZE	Select the video image size from the drop-down list.(FULL SCREEN / AUTO RESIZE / x0.5 / x1 / x2 / D1 / CIF)Note:Select [FULL SCREEN] to enlarge full screen of monitor. To return previous screen, press ESC key or double click.When you select [AUTO RESIZE], size of live view screen fit to window. Ratio imaging is fixed by width and height based.When you change view size option larger on high resolution image, browser function may not work smoothly.
H.264, 1280x720, 30fps, Quad Stream Mode	It displays Video Codec, Resolution, FPS and Preset Mode of the selected video stream.
TCP connection	Check this option as the network connection type (TCP or UDP). If you check it, the client connects to the server using TCP connection.
Buffer 0ms	Select buffering time of live stream.
Display	Click to display the check box of [Hostname], [Framerate] and [Bitrate] options. Select the [Position] on [Display] menu. (Top Left / Top Right)Video Analysis> Hide: Video Analysis display function is not in use.SVA: Displays the Smart Video Analysis function to the live view window.MD: Displays the Motion Detection function to the live view window.Note:While the [Pivot] is activated, on Profile2, Profile3 and Profile4, MD is available when a profile is set to the same codec with Profile1.When you use the DPTZ function, all of Display function is deactivated for a while.

[2KXX] Effect	Click to effect and then check the check box of [Edge Enhancement] option. The user gets more sharp reception on the live view window.Note:This feature only affects the live view window.
Snapshot	Click to save the current image in JPEG format on your computer.1. Click the [Snapshot] button and then the Snapshot window is displayed.2. Click the [Save] button in the Snapshot window.3. Enter the file name (JPEG format) and select the folder to save it.4. Click the [Save] button to confirm it.5. Click the [Cancel] button in the Snapshot window to close it.Note:It is not displayed the area of MD and SVA in Snapshot file.
PTZ control	Displays the PTZ (PAN / TILT / ZOOM) control window.Note:The Zoom / Focus adjustment is recommended during installation only. If you adjust the Zoom / Focus after completed the install, the screen is changed and feature set may behave differently.LNB7210 / LNB5110 series are not supported the PTZ control.LND5110 / LNV5110R / LND5110R / LNU5110R / LNU7210R series are supported the Zoom / Focus only.
	Select the video stream. From the Live view drop-down list, select the desired video image source.Note:You can set the stream configurations independently. This would facilitate the user to set the live view at his comfort.
	Provides all the necessary tools for setting up the device to your requirements. The user will need administrator level to do this.Note:If you want to exit the Configuration menu, select one of the video stream in the Live view drop-down list or click LG Smart IP Device icon.
	Displays the current surveillance live screen. You can monitor the camera image on the live view window of the LG Smart Web Viewer.
	Click this button and drag the area to use Digital PTZ function. Right-clicking the screen will bring up the previous magnification.(Color icon: On, Gray scale icon: Off.)1. Click this button to open the folder browse window. Click the button again in next time, video is recorded automatically without selection of folder.Note:If you want to change the folder, move to other pages or press the refresh button.When the Profile is changed, a new route storage folder is selected.Recording button is activated and recording will be started.Note:If recording exceed the time (1 hour) or size limit (1 GB), recording is stopped automatically with warning.To stop the recording, click this button during the recording.
	Click this button to connect or disconnect the audio communication between the LG IP device and the connected PC.(Color icon: On, Gray scale icon: Off.)
	Click this button to switch the microphone off and on for the computer.Note:When the audio is enabled both In and Out, microphone can be available to select the On/Off.(Color icon: On, Gray scale icon: Off.)
	Click this button to switch the sound off and on, for the speaker of the computer.(Color icon: On, Gray scale icon: Off.)

Configuration Menu Overview

The following table shows the list of menu items.

The configuration images may vary by model.

Main Menu Sub Menu Note
System	Version
	Date & Time
	Maintenance
	Storage
	Text Overlay
	Log & Report
	Language
Audio & Video	Camera
	Stream
	Audio
	PTZ config Option
	Preset Option
Network	Basic
	RTP stream
	TCP/IP
	DDNS
	IP filtering
	SNMP
	QoS
	802.1x
User Basic
Event	Event server
	Sensor & Relay
	Motion Detect
	Audio detect
	Smart Analytics
	Triggered Event
	Scheduled Event

Configuring the LG Network Camera Device

The features and options of the LG IP camera are configured through the Configuration menu.

Only administrator-level users have permission to access the Configuration menu.

Accessing the Configuration menu

Click the [Configuration] button to display the LG Smart Web Viewer configuration window.

Warning

The Configuration setup should be made by qualified service personnel or system installers.

System settings

Version

Displays the current Model Name, Software, ISP and MCU version.

Date & Time

Time zone

Set the time difference from GMT in the area where the IP device is installed. Select the time zone in the area where the IP device is installed from the drop down list.

Time mode

Synchronize with NTP Server: Select if you want to synchronize the IP device's date and time with those of the time server called NTP (Network Time Protocol). Specify the NTP server's name. Click the [Test] button for connection test to the server. Synchronize with personal computer: Select if you want to synchronize the IP device's date and time with your computer. Synchronize manually: Select if you want to set the IP device's date and time manually. Select the year, month and date by clicking the calendar button. Set hour, minutes and seconds in the edit boxes.

Note:

• When system reboot after time setting, time of system could be delayed. If you set the time correctly, set the [Synchronize with NTP server] option.
• Refer to NTP configuration as operation system of the Recording Server when the Recording Server use recording function and NTP server.

Server time

Server time: Displays the current date and time of the IP device.

- Save: Click this button to confirm the settings.

Maintenance

System reboot

Click the [Reboot] button to restart the IP device. It takes some minutes for the IP device to start again.

Backup and restore

Backup: To take a backup all of the settings. If necessary, it make possible to return to a backup configuration.

1. Click the [Backup] button.
2. Click the [Save] button.
3. Follow the instructions on the browser to specify the folder.
4. Click the [Save] button to save the settings.

Restore:

1. Click the [Browse] button.
2. Find and open the file in which the configuration setting data is stored.
3. Click the [Restore] button and the system settings will be restored and the system will reboot.

Note:

Backup and Restore can happen on IP devices having the same version of firmware. This feature is not intended for multi-configurations or for firmware upgrades.

Firmware

Upgrade

1. Click the [Browse] button.
2. Find and open the firmware file.
3. Click the [Upgrade] button to update the firmware.

Note:

When you upgrade the system, it may take some minutes to be done. Do not close the browser while the upgrade is in progress. If you close the browser, it may cause a malfunction. You should wait until the confirmation window is displayed. When the upgrade is finished, the confirmation window will be displayed.

Initialize: The [Initialize] button should be used with caution. Clicking it will return all of the IP device's settings to the factory default values, except for the Network settings, PTZ Protocol, and Preset settings. (The option depends on the model.)

Note:

Refer to the "Clear browser's Cache" of Troubleshooting.

Storage

General

Overwrite: If the micro SD card has insufficient space and this option is activated, it will overwrite the oldest data. DiskFull Notification: Sends a warning e-mail to the SMTP server when the micro SD card has fully recorded. Select the SMTP server from the drop-down list. You should register the SMTP server on the Event server setting to set this function. Network Failure Recording: Select the check box to activate the micro SD card recording function. If the system does not work with recording server, the system will record the data to the micro SD Card. When the system connects to the recording server again, the recorded data of the micro SD card will transfer to the recording server automatically. Recording Server IP: Enter the recording server IP. Set as NTP server IP: Click this button to use the entered Recording Server IP as the NTP server IP.

Note:

• The recorded file name is made automatically as the "[Created date of the file]_[GMT Recording Time].DAT" type.
• If the capacity of the SD card remains less than 200 MB, stop recording or overwrite new file after deleting old one as [Overwrite] setting. The overwritten file cannot be played or may malfunction when you download.
• Recorded file on the SD card is recording 1 frame per second when set video codec to MJPEG.

Device Management

Using the micro SD card

1. Insert the micro SD card carefully into the micro SD card slot of the camera.
2. Click the [Mount] button. If the micro SD card is mounted to the system correctly, the [Mount] button will change to the [Unmount] button.
3. Displays the information of the [Disk ID], [Status], [Capacity] options.

Note:

• When the micro SD card is mounted, you should format the micro SD card. After the micro SD card format is finished, you should click the [Mount] button to use it.
• When you use the micro SD card format function, it may not progress immediately. In this case, you should try it again after waiting a few minutes.

Remove the micro SD card

1. Click the [Unmount] button. If the micro SD card is unmounted from the system correctly, the [Unmount] button will change to the [Mount] button.
2. Remove the micro SD card from the micro SD card slot of the camera.

Note:

When you use the Unmount function, it may not progress immediately. Operations such as recording of the system and reading of data are required stop time before the Unmount function is activated. You should try it again after waiting a few minutes.

File Format

File Format: You can select the Recording File Format (AVI or DAT). Recording, Search and Download are available according to the setting.

Note:

• SD Recording or FTP (Video) Sending Format are set according to the setting. When you select AVI, [Auto Recording function] may not be activated in case of network error.
• IP Camera's time will be appeared in players based on DirectShow such as Windows Media Player and MPlayer.

File Management

Displays the recorded file of the micro SD card on the list. Click the [Search] button to display the recorded file. The list will be updated when you click the [Search] button.

To view the recorded file of the micro SD card

1. Select the search option.
2. All: Search all recorded files in the micro SD card.
3. Some: You can set the search condition by using the date and time options.
4. Click the [Search] button and then the search result is displayed on the list.

Download: You can download the recorded data of the list to your PC. Select a recorded file on the list and click the [Download] button. The two confirmation window is displayed. You should download the all files that the recorded file(*.DAT) and information file(*.INFO). You can download as AVI file according to File format.

Note:

• It is recommended to deactivate the [Overwrite] function before you download the file. When [Overwrite] function is activated, the downloading file might be overwritten, if the micro SD card has insufficient space.
• The downloaded file can be played by using the LG File player.

Remove: Delete file from the SD card.

• Save: Click this button to confirm the settings.

Text Overlay

Preview

You can preview the camera image on the preview window.

Mode

Normal Mode: Follow the normal procedure of text overlay option by selecting the [Normal Mode]. Multiline Mode: Set more characters, color and size of the text overlay by selecting the [Multiline Mode]. The saved text overlay is displayed on the left top of screen.

Basic Configuration

When you select [Normal Mode], you can adjust the [Date&Time], [Text Information], [X position], [Y position], and [User Title] functions. Other functions can be adjusted by selecting [Multiline Mode].

Date&Time: Click the check box of [Date&Time] to display the time and date of the Client PC. Text Information: Enter characters in the text field (from [Text1] to [Text2]). The maximum number of input characters depends on the resolution.

X Position: Set the horizontal position of each text overlay. Y Position: Set the vertical position of each text overlay. User Title: Enter the user title. The user title is displayed at the bottom right of the screen.

Multi-Line Text: Enter characters in the text field. The maximum number of input characters depends on the resolution.

Color: You can create any color by adjusting the R.G.B. levels. Size: You can adjust the font size. Transparency: You can adjust the background transparency of the text.

Note:

• If you change the [CaptureMode], the existing characters may not be seen partially. - The [Multi-Line Text] is a one-off feature. When you refresh a browser to connect to this option again, the text input field of [Multi-Line Text] is cleared, but the contents of the text overlay remain on the live view screen. - If you use the following features, the text overlay is changed to [Normal Mode]: [System>Maintenance>Reboot], [Audio & Video>Camera>Install>CaptureMode], [Audio & Video>Camera>Install>Install Preset], [Audio & Video>Camera>Install>WDR], [Audio & Video>Camera>Install>Sensor Framerate]. - Text can be blurred depending on the background scene and codec quality. In this case, you can set the text area as the Smart Codec.

- Save: Click this button to confirm the settings.

Log & Report

Log & Report status

The System log provides a summary of the status of the IP device. The unit records the data of the software activity in a file.

View Log: Click this button to display the system log information.

- Download: Click this button to see the log information of the system.

View report: Click this button to display the report of the system.

- Download: Click this button to see the report information of system.

Note :

The downloaded file is a UNIX type. If you open the file in Microsoft Notepad, it will display the text as if the file contained no line breaks at all.

Language

Language list

Select a language for the LG Smart Web Viewer configuration menu and information display.

• Save: Click this button to confirm the settings.

Audio & Video settings

Camera

Preview

(LNB7210 / LNB5110 series only)

You can preview the camera image on the preview window.

Note:

The preview screen may differ depending on models.

Preview

(LND5110/LNV5110R/LND5110R/LNU5110R/

LNV7210/LND7210/LNV7210R/LND7210R/LNU7210R series only)

1. Move the camera to the point you want by using the arrow buttons.
2. Adjust the zoom, focus options.
3. Set the Pan, Tilt, Zoom or Focus step options. (LND5110 / LNV5110R / LND5110R / LNU5110R / LNU7210R series are not supported the PAN and TILT function.)

Note:

• Focus Push: To save the final location after the Auto Focus operation is performed.
• Except for [Focus Push], the location of the lens is not stored. If the power is turned off or restart the software, the lens may not move to the final location.
• Press and hold the direction button, the camera moves continuously until you release the button, after move one step as long as set value. Depending on the set step value, PTZ movement can be flinch for a second.

Install

Install Preset: Select the Install Preset mode from the dropdown list.

Note:

• Privacy Mask settings are initialized every time Pivot Mode is selected or deselected.
• It is displayed the constraints according to preset settings by mouse-over at the right-top of the drop-down list box.

Install Preset	Sensor Framerate	Pivot	Video Out	WDR	Max Streams
Quad Stream	25 or 30 Off	Off		On / Off	4
Triple Stream	25 or 30 (Default)	Off	NTSC / PAL / Off	On / Off	3
Pivot 25	or 30 On Off			On / Off	3
HighFramerate	50 or 60 Off Off 2

Capture Mode (LND5110 / LNV5110R / LND5110R / LNU5110R / LNB5110 series only): Select the capture mode.

Capture Mode Resolution

16:9 1280 x 720

4:3 or 5:4 1280 x 1024

Note:

If you change the Capture Mode option, the Privacy settings on the OSD menu are initialized.

Sensor Framerate: Select the Sensor Framerate value.

Note:

• The maximum FPS value cannot exceed the value of Sensor Framerate.
• Pivot, Video out, WDR, and Max Stream Count are limited, depending on the Install Preset setting.
• You need to reset the Motion Detect and Smart Analytics in the Event menu every time Pivot Mode is selected or deselected.

Video Out: Select the video standard of the camera from the drop-down list. WDR: The WDR (Wide Dynamic Range) feature can be very helpful in coping with very challenging lighting conditions. It is capable of capturing both the dark and bright parts and combining the differences into a scene to generate a highly realistic image as the original scene.

Note:

When WDR is running, [Dynamic Range Enhancer] is operated and [Minimum Shutter Speed] is adjusted automatically.

EIS: The image stabilizer function minimizes the appearance of shaky images caused by low-frequency vibration. This function is useful for outdoor surveillance. Select the [EIS] option and set it to [On] or [Off]. D-Effect: You can select the digital effect.

- Mirror: Turn on the mirror effect.

- V-Flip: Flip the picture vertically.

Note:

• Video codec settings should be set to H.264 or H.264_HIGH to operate the EIS and Pivot function.
• When you change the settings of [Install Preset], [Sensor Framerate] and [WDR], the system may be rebooted or video may be disconnected temporarily.
• The [Mirror] and [V-Flip] functions can be selected at once.
• In the [Pivot] mode, the Text Overlay is rotated 90 degrees counterclockwise to the output. It is not affected by the Mirror and V-Flip. • Install settings will be updated at the time of entering the Install tab.
• Save: Click this button to confirm the settings.
• Default: Click this button to restore the IP device back to original factory settings.

Focus (LND5110 / LNV5110R / LND5110R / LNU5110R series only)

Mode: Select the [Mode] option on the [Focus] menu, then select the following mode.

• Zoom Trig: After the change of the zoom position, the camera performs autofocus once. Also, manual focusing is enabled too.
• Manual: Use the <, <=, >=, >, or >> button to adjust the focus position manually.
• Focus Push: This function will be activated automatically to adjust the focus.
• Focus Save: Save the position of Zoom and Focus at the moment of clicking this button. The focus moves to the stored position even if the camera is reset.
• Focus Reset: If abnormal operation occurs or the camera is out of focus due to external shocks or other reasons, click this button to initialize the lens and return to the current location.

Note:

• After installation, the focus may be twisted by external shocks. In this case, press the [Focus Reset] button to initialize the lens.
• Click the , <, <, >, or >> button to move once within a narrow range. The movement range depends on the shape of the >, >, and buttons.

Day/Night AF: You can set the AF function when the Day/Night mode is converted.

• High / Medium / Low: Select [High], [Medium], or [Low] for the AF operating range. When [High] is selected, the widest AF operating range is set.
• OFF: The AF function is not used when the Day/Night mode is converted.

Night Offset (LNV5110R / LND5110R / LNU5110R series only): Adjust the focus manually in the night mode of the Day/Night function. Adjust the value by moving the handle or pushing the arrow button.

Note:

• 100 is the standard value. The closer the value is to 200, the further the focusing distance will be, and the closer to 0, the nearer.
• When the Day/Night function is converted to day mode, the focus will be returned to the previous position.
• It will be highly efficient when it is hard to focus with the [Day / Night AF] function.

Focus (LNB7210 series only)

Auto: Select [Auto] option on the [Focus] menu, then select the following mode.

- Focus Push: This function will be activated automatically to adjust the focus.

- Focus Reset: The focus position is located at the factory default position.

- Manual: Use the , , , , or button to adjust the focus position manually.

Note:

- When mounting the lens, press the [Focus Reset] button to reset the focus.

- After adjusting the focus approximately, press the [Focus Push] button to fine-tune the lens into sharp focus.

Day/Night AF: You can set the AF function when the Day/Night mode is switched.

- High / Medium / Low: Select [High], [Medium], or [Low] for the AF operating range. When [High] is selected, the widest AF operating range is set.

- OFF: The AF function is not used when the Day/Night mode is switched.

Mode: Select the [Mode] option on the [Focus] menu, then choose one of the following modes.

- Zoom Trig: After a change in zoom position, the camera performs autofocus once. Manual focusing is also enabled.

- Manual: Use the , , , , or button to adjust the focus position manually.

- Focus Push: This function activates automatically to adjust the focus.

- Focus Save: Saves the zoom and focus positions at the moment this button is clicked. The focus moves to the

stored position even if the camera is reset.

- Focus Reset: If abnormal operation occurs or the camera goes out of focus due to external shocks or other reasons, click this button to initialize the lens and return to the current location.

Note:

- After installation, the focus may be misaligned due to external shocks. In this case, press the [Focus Reset] button to initialize the lens.

- Click the , , , or button to move once within a narrow range. The movement range depends on the shape of the , , buttons.

Day/Night AF: You can set the Day&Night function with the AF function.

- ON: If set to On, the AF function will be activated automatically when the D/N function is activated.

- OFF: Not used.

Note:

- While autofocus is performed, in the following cases it may not be able to focus:

1. When the environment is too dark to distinguish the object.
2. When the brightness of the surroundings changes sharply.
3. When the object is too far away or movement is severe.
4. When the image contrast is low.
5. When there is a strong light source in front and behind.
6. When the camera is shaken by external vibration or shock. If the camera is out of focus after autofocus, adjust the focus manually using the , , , , or button.

- In the conditions as above, it may be out of focus when the Day / Night mode is converted. In this case, it is recommended to select [Low] or [Off].

- Default: Click this button to restore the IP device back to original factory settings.

Exposure

IRIS: Select the desired lens iris value for camera exposure. Select [IRIS] option on the [Exposure] menu, then select a value.

• Auto: The lens iris is set automatically.
• Manual: Select this option when using the lens for adjusting IRIS manually.

Note:

When [Manual] is selected, IRIS is fixed on full open state. In this case, adjust the brightness by shutters.

BLC: Camera's backlight compensation feature helps alleviate issues of visibility in high contrast areas.

Note:

When [WDR] is set to [On], the BLC is deactivated.

Dynamic Range Enhancer: Adjusts the contrast of the image automatically to provide bright and clear images.

Note:

When [WDR] is set to [On], the [Off] option of [Dynamic Range Enhancer] is deactivated. It adjusts the level of the [WDR].

De-Fog: Select the value to remove the misty fog from the image.

Note:

If the [De-fog] function operates while [WDR] is turned on, only simple effects occur as On/Off without a difference in the operating level (High/Middle/Low). Because the WDR includes the auto-adjust De-fog.

AGC: If the images are too dark, change the maximum [AGC] value to make the images bright. Brightness: Adjust the brightness of images. Shutter Speed: Select the desired shutter speed for camera exposure. You can change the shutter speed to a higher speed to capture fast-moving subjects, though the image becomes darker.

Note:

When [WDR] is set to [On], [Minimum] is deactivated and adjusted automatically.

Minimum Shutter	1/10 000	1/5 000 1/	2 500 1/1	500 1/1 000
	1/700 1	1/500 1/480	1/400 1/360
	1/300 1	1/250 1/240	1/180 1/150
	1/120 1	1/100 1/60	1/50 1/30
	1/25

Maximum Shutter	1/10 000	1/5 000 1/	2 500 1/1	500 1/1 000
	1/700 1/	500 1/480	1/400 1/3	60
	1/300 1/	250 1/240	1/180 1/1	50
	1/120 1/	100 1/60	1/50 1/30
	1/25 1/	20 1/15 1/	8 1/4
	1/2 2/3	1	1.5	2

Flickerless: Remove the band noise caused by fluorescent light.

Note:

When [IRIS] is set to [Manual], if the surrounding area is bright, flicker can be seen even if [Flickerless] is set. In this case, set [IRIS] to [Auto].

- Default: Click this button to restore the IP device back to original factory settings.

White Balance

Mode: Select the [Mode] option on the [White Balance] menu, then select the following mode.

- Auto: Adjust the white balance of the full image area. Use this function in environments with special lighting lamps.

Note:

When a monochromatic object is caught on camera, the object may seem faded. In this case, it is recommended to set to [ATW] mode.

• Manual: You can set the white balance options manually. If the [Mode] option is set to [Manual], [Red] and [Blue] are displayed.
• ATW (Auto-Tracing White Balance): Adjust the white balance by tracing the white area. In the following conditions, it may not work properly:
• When the scene contains mostly high color temperature objects, such as a blue sky or sunset.
• When the scene is dim.

- ONE PUSH: If you select the [ONE PUSH] mode, you will be able to set up the White Balance automatically.

Red: Set the desired red value. Blue: Set the desired blue value. Color Temp: If the [Mode] option is set to [ATW], this option is displayed. Click to select the option.

• Indoor: Adjust the white balance according to the indoor environment.
• Outdoor: Adjust the white balance according to the outdoor environment.

- Default: Click this button to restore the IP device back to original factory settings.

Day/Night

Mode: Select [Mode] option on the [Day/Night] menu, then select the following mode.

• Auto: [Day/Night] mode can be changed to [Auto] mode depending on the [Level] settings.
• Day: Maintains the color mode always.
• Night: Maintains the black-and-white mode always.
• External: The Day/Night mode is converted by using Alarm In Port.
• Schedule: Operates as [Day] mode during set time.

To set the schedule

1. Select the [Schedule] option. The detail options are displayed.

1. Select the check box of options.

• All: Operates as [Day] mode every day during set time. - Sunday - Saturday: You can set the time for each day of the week. For days of week which are not selected, it operates as [Auto] mode. - Save: Click this button to save the schedule setting.

Level: Adjust the automatic conversion time according to the ambient light. If you select [High], conversion is made in the lowest illuminance. User Level: When you set the [Level] option to [User], you can adjust the automatic conversion time according to the ambient light. The left handle sets the value of [Night >> Day] and the right handle sets the value of [Day >> Night]. Dwell Time: Set the time to maintain the brightness for the automatic conversion.

Note:

• When you set to [External] mode, the [Sensor] function of [Triggered Event] will be deactivated.
• In case of [External] mode, you should set to [Enable] from the [Sensor&Relay > Sensor] option.

- Set the type of [Sensor] according to External Sensor type. The Day/Night mode is converted as below table.

Sensor Type Alarm Mode
Normal Open	High Day
	Low Night
Normal Close	High Night
	Low Day

- If the difference of value between [Day >> Night] and [Night >> Day] is not big enough, may occur the problem to convert the Day and Night.

- When the [AGC] is set to [Off], the [Day/Night] is initialized to [Day] mode. Other settings of [AGC] are initialized to [Auto] mode.

- Default: Click this button to restore the IP device to original factory settings.

- Auto: When the [Day/Night] menu is set to [Night] mode, the brightness of the IR LED will be adjusted automatically. The [Max Level] is displayed.

- Manual: When the [Day/Night] menu is set to [Night] mode, the brightness of the IR LED will be fixed.

- Off: When the [Day/Night] menu is set to [Night] mode, the IR LED will be turned off.

Max Level: If the [Mode] option is set to [Auto], you can adjust the maximum brightness of the IR LED.

Note:

When the [IRIS] is set to [Manual], the [Auto] mode is deactivated.

Level: If the [Mode] option is set to [Manual], you can adjust the fixed brightness of the IR LED.

- Default: Click this button to restore the IP device to original factory settings.

Image

Noise Reduction: If pictures are not clear due to noise, this option would reduce the noise of the picture. When you use this function, afterimages may occur. Color Saturation: Set the intensity of the color. Sharpness: The degree to which the boundary of two portions is clearly distinguished. If you set the sharpness value higher, the image outline becomes sharp. If you set it lower, the image outline becomes dim. Privacy Mask

- Add: Click the [Add] button.

1. When you click on the preview screen, a yellow cross point is displayed.
2. Click again to make another point. The point is connected as a sky blue line from the previous point.

Note:

• When you select all 4 points, the area is set automatically.
• To set the Privacy Mask area, each of the four vertices must be convex. If one of the 4 vertices is inside to create a concave area, the Privacy Mask area will not be set.
• You can cancel a point by clicking the mouse right button near the other point. Up to 4 zones are available to set.
• Delete: Delete the selected zone.
• Delete All: Delete all of the mask zones.
• Save: Save the settings of the Privacy Mask.

Note:

• If the privacy mask setting is changed, it is not applied immediately. You need to click the [Save] button to save the settings.
• When the [Image] tab is selected, the Privacy Mask area is displayed on the preview window.
• Set the [Privacy Mask] after completing the [Install] settings.
• The Privacy Mask settings area is not maintained by the screen change due to the operation of Pan / Tilt / Zoom. When resetting the Pan / Tilt / Zoom, you need to reset the Privacy Mask settings area as well.
• If the [D-Effect] is changed, the [Privacy Mask] settings will be initialized.
• The [EIS] and [Privacy Mask] cannot be used at the same time.

- Default: Click this button to restore the IP device back to original factory settings.

Stream

Profile

Select the stream [Profile1], [Profile2], [Profile3] or [Profile4] depending on Install Preset.

Note:

It is displayed the constraints according to the current preset settings by mouse-over at the right-top of the current Preset.

Profile Profile1 Profile2 Profile3 Profile4
Quad Stream	SXGA @ 30 fps	SXGA @ 30 fps	SXGA @ 30 fps	CIF @ 30 fps
Triple Stream	SXGA @ 30 fps	D1 @ 30 fps	SXGA @ 30 fps	N/A
Pivot	SXGA @ 30 fps	D1 @ 30 fps CIF @ 30 fps N/A
High Framerate	SXGA @ 60 fps	D1 @ 60 fps N/A N/A

Profile Profile1 Profile2 Profile3 Profile4
Quad Stream	1 080P @ 30 fps	1 080P @ 15 fps	720P @ 30 fps	CIF @ 30 fps
	1 080P @ 30 fps	720P @ 30 fps	720P @ 30 fps	CIF @ 30 fps
Triple Stream	1 080P @ 30 fps	1 080P @ 15 fps	720P @ 30 fps	N/A
	1 080P @ 30 fps	720P @ 30 fps	720P @ 30 fps	N/A
Pivot	1 080P @ 30 fps	N/A N/A	N/A
	1 080P @ 15 fps	720P @ 30 fps	CIF @ 30 fps	N/A
	720P @ 30 fps	720P @ 30 fps	CIF @ 30 fps	N/A
High Framerate	1 080P @ 60 fps	N/A N/A	N/A
	720P @ 60 fps	D1 @ 60 fps	N/A N/A

Enable: Click to activate the stream function. Video codec: Select the video mode (Codec) from the drop-down list. The viewer can choose among MJPEG, H.264 and H.264_HIGH. Resolution: Select the resolution from the drop-down list. Maximum frame rate: Set the frame rate of the image.

Note:

Refer to the table below for the supported Framerate. If you enter the unsupported framerate, the less Encoding Framerate than the input is applied.

For example, when 17 fps is entered, 15 fps will be applied.

EncodingFramerate	Sensor Framerate
	60 50 30 25
60	O	N/A N/A N/A
50	O	O	N/A N/A
30	O	O	O	N/A
25	O	O	O	O
20	O	O	O	O
15	O	O	O	O
10 0 0 0 0
5 0 0 0 0
4 0 0 0 0
3 0 0 0 0
2 0 0 0 0
1 0 0 0 0

GOP size: It means "Group of Pictures". The higher the GOP, the better is the video quality of the camera. Set the value of GOP from 1 up to 60 depending on Install Preset settings. This setting is valid for H.264 video format only. Quality: Select the Quality.

• VBR: The bit rate may vary depending on the complexity of the video to meet the selected quality.
• CBR: The video quality may vary in order to preserve a constant bit rate. Smart Codec: You can improve the image of specific area to configure the Region or Face Detect. If you select the [Region] option, the [Smart Codec (Region)] window is activated.

Note:

• When the video codec is H.264 or H.264_HIGH, the Smart Codec can be selected.
• Two areas can overlap and the sum of the two areas have to be less than 30% of the total area.
• Smart Codec settings area is not maintained by the screen change by the operation of Pan / Tilt / Zoom. When reset the Pan / Tilt / Zoom, you need to reset the Smart Codec settings area also.

Stream quality: If the [Quality] option set to VBR, this option is displayed. Select the stream quality from the drop down box, the camera supports five types. (Highest, High, Medium, Low and Lowest) Bit rate: If the [Quality] option set to CBR, this option is displayed. If the Profile is set to [Profile1], can be set the Bitrate value from 1 024 kbps to 10 240 kbps. In case of [Profile2], [Profile3], [Profile4], can be set from 256 kbps to 10 240 kbps.

Note:

If the 'Bit rate' is configured too low with high resolution, the actual frame rate will decrease because of narrow bandwidth. So you need to set or change the 'Bit rate' to high value.

JPEG Snapshot Quality

Snapshot Quality: Select the quality of JPEG snapshot.

- Save: Click this button to confirm the settings.

Audio

Audio In

Enable: Click the check box if you want to send the audio from the microphone input connector.

Note:

The Clients connected to the IP device remain unaffected with additional changes made in the setting.

Input: Select the type of audio input. (Line in, Microphone) Audio type: Select the type of audio encoding.

(G711 PCMA, G711 PCMU, G726 24K, G726 32K)

Audio Out

Enable: Click the check box to output the audio from the speaker.

Note:

Depending on the camera and network conditions, there may be a delay of a few seconds.

- Save: Click this button to confirm the settings.

PTZ config (Optional)

PTZ protocol list

PTZ protocol: Displays the selected PTZ protocol.

PTZ configuration

Camera ID: Enter the PTZ device ID. Make it the same as the PTZ device ID. Pan speed: Enter the panning speed of the PTZ device in the edit box. Tilt speed: Enter the tilting speed of the PTZ device in the edit box. Zoom speed: Enter the zoom speed of the PTZ device to view the object close or at a distance. Focus speed: Enter the focus speed of the PTZ device to focus an object clearly near or far.

Port

Baud rate: Select the desired speed of communication between the IP device and the PTZ device. Confirm the selected parameter matches the baud rate of the IP device. Data bit: Set the number of data bits for RS-485 communication. Parity: Select the desired parameter. The parity bit is added to the data to perform parity checking. Stop bit: Enter the desired parameter. The stop bit is added to the end of data in asynchronous communication.

- Save: Click this button to confirm the settings.

Preset (Optional)

Preset

Displays the registered preset position.

1. Move the camera to the point you want by using the arrow buttons.
2. Set the Pan, Tilt, Zoom or Focus step options.

Add: Click to add a preset position.

1. Enter the preset index and speed.
2. Click the [Add] button.

Remove: Click to delete the preset position.

1. Select the preset from the list.
2. Click the [Remove] button. The preset will be deleted.

Go to preset: Move to the preset position.

1. Select the preset from the list.
2. Click the [Go to preset]. The camera will be moved to the selected preset.

Note:

Whether RS-485 is connected or not, the [Focus Push] and [Save] functions always work.

Network settings

Basic

General

MAC address: Displays the MAC address.

Port & Encryption

Network encryption: Select the HTTP or HTTPS option for security. Smart Port Setting: Select [On] to allocate a port number automatically.

Note:

If you select [On], the [UPNP Status], [External IP], [Web Port], and [RTSP Port] options are deactivated.

UPNP Status: When you use a router that supports the UPNP function, you can set the port forwarding automatically by using the [Smart Port Setting]. [UPNP Status] shows the connected status of the router. External IP: When you connect a router that supports the UPNP function, this option is displayed. It displays the external IP address allocated by the router. Web port: The default HTTP port number (80) can be changed to any port within the range 1025 to 65535. RTSP port: Check the RTSP port. The default port is 554. Other ports can be selected within the range 1025 to 65535.

Note:

The RTSP port number should not be the same as the web port number.

ARP ping

Enable ARP ping to configure IP address: Check to enable ARP ping.

- Save: Click this button to confirm the settings.

RTP stream

RTP (Real-time Transport Protocol) is an internet protocol that allows programs to manage the real-time transmission of multimedia data, via unicast or multicast.

Profile

RTP unicast: When enabled, the transmission of the data to the specified equipment happens on a network specifying a single address. RTP multicast: When enabled, it reduces the transmission load on the camera by making the computers on the same network segment receive the same transmission data. When the multicast option is checked, then select Video Port number, Audio Port number, and Data port number.

• IPv4 address: Set the IP address for RTP multicast.
• Base RTP port: Enter the port number of even number used for the multicast streaming. Each profile uses successive 6 port numbers which start from [Base RTP port]. It is initially set to 10,000 and you can edit this between 10,000 and 65,530. Motion-Control FPS: If there is movement, the Framerate is adjusted automatically.

Note:

• Video codec settings should be set to H.264 or H.264_HIGH to operate the Motion-Control FPS. - Each profile using multicast needs its own multicast IP address and port numbers to avoid address conflict. When more than 2 profiles use the same multicast IP address, each [Base RTP port] number should be distinguished from the other port number by at least 6.

Multicast

Always Multicast: Check to enable multicast regardless of client connection.

TTL

TTL: This option indicates the Time-To-Live of multicast packets. The default setting is 7, and the allowed TTL range is from 1 to 255.

IP Fragmentation

IP Fragmentation: Check to enable IP fragmentation. When the VMS does not support IP Fragmentation, uncheck this feature.

• Save: Click this button to confirm the settings.

TCP/IP

IPv4 address status

Automatically set with DHCP: Select this option when a DHCP server is installed on the network to allow IP address assignment. With this setting, the IP address is assigned automatically.

- Notify to SMTP server, if IP address is changed: If you select this option, the user gets a notification email about the change of IP of the IP device.

Note:

• You should register the SMTP server on the Event server setting to set this function.
• If you select [Automatically set with DHCP], the camera obtains IP address from DHCP server after IP address is set "192.168.0.16".

Statically set: Select this option when you set a fixed IP address. With this setting, specify the IP address, Subnet mask, and default gateway manually.

• IPv4 address: Enter an IP address.
• Subnet mask: Enter a subnet mask address.
• Gateway: Enter the gateway address.

DNS server status

Primary DNS server: Enter the primary domain name server that translates hostnames into IP addresses. Secondary DNS server: Enter the secondary DNS server address that backs up the primary DNS.

IPv6 address status

Enable: Click the check box if you want to use the IPv6 address. Mode

• Manual: Select this option when you set a fixed IP address manually.
• Basic: Select this option to allow IPv6 address assignment based on the MAC address. With this setting, the IP address is assigned automatically.
• DHCPv6: Select this option when a DHCPv6 server exists in the network. If the DHCPv6 server does not exist or is temporarily disabled, it requests assignment every 3 minutes. IPv6 address: You can enter the IP address when you select the Manual mode. It alarms when you enter an invalid IP address.

- Save: Click this button to confirm the settings.

DDNS

This free service is very useful when combined with the LG DDNS Server. It allows the user to connect to the IP device using the URL, rather than an IP address. This also solves the problem of having a dynamic IP address.

DDNS status

Don't use DDNS server: Disable the DDNS function. Use DDNS server: Enable the DDNS function.

• Provider: Displays the DDNS provider.
• Hostname: Enter the hostname you want to use.

• Save: Click this button to confirm the settings.

IP filtering

The access of the IP addresses in the list is allowed or denied according to the choice made in the drop-down list of the Basic policy option. The administrator can add up to 10 IP address entries to the list (a single entry can contain multiple IP addresses). The users from these IP addresses need to be specified in the user list with the appropriate access rights. The IP list is to control the access permission of clients by checking the client IP address.

IP list

Basic policy: Select the basic policy type.

• Allow all: Allow all IP addresses by default, but the IP addresses in the list are denied.
• Deny all: Deny all IP addresses by default, but the IP addresses in the list are allowed. It requires at least one IP address to activate this function.

• Save: Click this button to confirm the settings. - Add: Click this button to add the IP address.

1. Click the [Add] button.
2. Set the IP options.
3. Alias: Enter the alias.
4. From: Enter the start IP address for the IP filtering.
5. To: Enter the end IP address for the IP filtering.

Note:

If you want to deny or allow a range of IP addresses, enter the start IP address in "From" and the end IP address in "To". You can also add a single IP address by entering the same IP address in both "From" and "To".

1. Click the [Save] button.
2. Repeat steps 1 to 3 to add additional IP addresses.

- Remove: Click this button to delete the IP address.

1. Select the alias from the list.
2. Click the [Remove] button. The IP address will be deleted.

IPv6 address

- Add: Click this button to add the IP address.

1. Click the [Add] button.
2. Set the IP address option.

- Alias: Enter the alias.

- IPv6 address: Enter the IP address for IP filtering.

1. Click the [Save] button.
2. Repeat steps 1 to 3 to add additional IPv6 addresses.

- Remove: Click this button to delete the IPv6 address.

1. Select the alias from the list.
2. Click the [Remove] button. The IPv6 address will be deleted.

SNMP

The Simple Network Management Protocol (SNMP) is an application protocol used to exchange management information about network devices.

SNMP v1/v2c

Enable SNMP v1/v2c: Select this option to allow SNMP access to this device.

Read Community: Specifies the SNMP management community in which you want to read this system.

Write Community: Specifies the SNMP management community in which you want to write this system.

SNMP v3

Enable SNMP v3: Selects when SNMP v3 is allowed access to this device. It supports authentication and encryption.

SecurityName: Type the security name for the SNMP.

Password: Type the password for the SNMP.

- Save: Click this button to confirm the settings.

QoS

You can specify network Quality of Service (QoS) settings.

QoS DSCP Configuration

Video DSCP: Enter the priority of Video for DSCP (Differentiated Service Code Point) Quality of Service.

Audio DSCP: Enter the priority of Audio for DSCP Quality of Service.

Event DSCP: Enter the priority of Event for DSCP Quality of Service.

• Save: Click this button to confirm the settings.

802.1x

Specifies whether 802.1x network access is enabled.

802.1x/EAPOL using EAP-TLS

Enable: Select on to enable the protocol. Current authorization status of 802.1x port is displayed on buttons right.

Certificates

To upload or remove the certificates

1. Click the [Browse] Button.
2. Find and open the certificates file.
3. CA Certificate: Upload the accredited certificate included public key.
4. Client Certificate: Upload the accredited certificate included client authentication key.
5. Client private key: Upload the accredited certificate included client private key.
6. Click the [Upload] button to install certificates.
7. Click the [Remove] button to delete certificates.

Basic Configuration

EAPOL Version: Select the EAPOL version. EAP ID: Enter the ID of the client certificate using up to 16 characters. Password: Enter the password of the client private key using up to 16 characters.

- Save: Click this button to confirm the settings.

User settings

Basic

The IP device is shipped with the login rights of administrator only. If others need to access the IP device excluding the configuration, a login with viewer rights needs to be created. A maximum of 50 users can be created.

User list

Add the User

You can register a new user with various access rights.

1. Click the [Add] button. The user setting dialog is displayed.
2. Enter the new User ID and Password. (Should have a minimum of 4 characters and preferably a combination of alphanumeric.)
3. To confirm the password, retype the password that you typed in the Password box.
4. Select the authority from the drop-down list to provide the access rights to each user and then click the [Save] to confirm your selection.
5. Administrator: Allows you to operate setup menus and to view live images.
6. Power user: Use of the limited functions of the system. (The Configuration menu is not allowed.) A power user can use the Live View, OSD control and audio functions.
7. Normal user: Provides the lowest level of access, Allows to view live images only.
8. Custom user: The user can login and view the live stream image only when the "Enable anonymous login" option is checked to enable it.

Note:

• Remember the password. • Displayed Items according access authority are like below:

	Admin	Power User	Normal User / Custom User
PTZ O O X
DPTZ O O X
REC O O X
BI-AUD O O X
MIC O O X
SPEAKER	O O X
SETTINGS	O	X	X

Edit the registered user

You can change the password or authority.

1. Choose the user ID and then click the [Edit] button.
2. Change the Password or Authority, then click the [Save] button to confirm your selection.

Delete the registered user

1. Choose the user ID you want to delete.
2. Click the [Remove] button.

Note:

The default administrator user ID 'admin' and 'anonymous' are permanent and cannot be deleted.

Anonymous

Enable anonymous login

Check the box to enable anonymous user login - allows the user access for only viewing the live stream image.

Maximum RTP stream connection

Maximum number of simultaneous stream connection:

Set this number to limit the number of simultaneous stream connections.

The connections depend on the stream configuration as shown in the following Maximum RTP stream connection by stream configuration.

Preview window of the IP device setting and preset setting are affected by this setting.

- Save: Click this button to confirm the settings.

Event settings

Event server

Event Servers are used to receive the recorded video clip and/or notification messages.

FTP server list

Image files can be transferred to the FTP server within the scheduled time. Image file that has been recorded linked to an external event is sent to the FTP server periodically.

To add the FTP server

1. Click the [Add] button. The FTP server setting window is displayed.
2. Set the FTP server options.
3. Alias: Type the FTP Server name to upload the image files.
4. Address: Enter the FTP server's IP address.
5. Port: Enter the port number. The default FTP port is 21.
6. User ID: Type the user name for the Folder shared in the FTP server.
7. Password: Type the password for the folder shared in the FTP Server.
8. Folder: Type the path with the folder that is shared in the FTP server.
9. Test: Select [Test] to test the FTP server.
10. Click the [Save] button to confirm the settings.

To edit the FTP server

1. Choose the FTP server in the FTP server list.
2. Click the [Edit] button.

You can check or edit the FTP server options.

To delete the FTP server

1. Choose the FTP server in the FTP server list.
2. Click the [Remove] button. This would remove the FTP server from the list.

SMTP server list

By selecting the e-mail option, a still image of the event is captured and an e-mail with the attached image file is sent to the specified mail address.

To add the SMTP server

1. Click the [Add] button. SMTP server setting window is displayed.
2. Set the SMTP server options.
3. Alias: Enter the SMTP server name.
4. User ID: Enter the user ID of the SMTP server. This would be the one who owns the mail account.
5. Password: Enter the password of the SMTP server.
6. Address: Enter the SMTP server address.
7. Port: Enter the port number. The default port is 25.
8. Enable SSL: Check when using the SSL (Secure Socket Layer) protocol. SSL protocol is a cryptographic protocol that provides secure communication on a

network.

• Receiving address: Type the recipient's e-mail address. You can specify only one recipient e-mail address.
• Administrator address: Type the e-mail address of the administrator.
• Subject: Enter the subject/title of the e-mail.
• Message: This message can describe the information of the acquired IP address, etc.
• Test: Select [Test] to test the SMTP server.
• Click the [Save] button to confirm the settings.

To edit the SMTP server

1. Choose the SMTP server in the SMTP server list.
2. Click the [Edit] button.

You can check or edit the SMTP server options.

To delete the SMTP server

1. Choose the SMTP server in the SMTP server list.
2. Click the [Remove] button.

Sensor & Relay

Sensor

Enable: Marks up when you want to activate the sensor. Alias: Displays the sensor name. Type: Select the sensor type.

Relay

Control duration: Enter the relay time. Alias: Displays the relay name. Type: Select the relay type. Control relay

• Run: Click to activate the relay.
• Stop: Click to stop the relay.

• Save: Click this button to confirm the settings.

Note:

The number of sensors and relays depends on the model.

Motion Detect

Preview

You can preview the motion detection window on the preview window.

General

Sensitivity: Enter the sensitivity to detect an object in motion.

- Save: Click this button to confirm the settings.

How to set the motion detect window

1. Click the [Add] button. The motion detect window is displayed. You can add up to three windows for the motion detection area.
2. Set the [Sensitivity] option.
3. Click the edge or corner of the window box to adjust the window size for motion detection.
4. Click the [Save] button to save the settings.

Note:

• Created motion detection area windows will be applied for the same sensitivity at once.
• Increase the sensitivity in environments with low lighting or little motion. On the contrary, in environments with high lighting or a lot of motion, decrease the sensitivity.
• The Motion Detection function may not work depending on your installation environment.
• The Motion Detection settings area is not maintained when the screen changes due to Pan/Tilt/Zoom operations. When you reset the Pan/Tilt/Zoom, you also need to reset the Motion Detection settings area.
• You can reset the window size. Click one of the window edges or corners and drag & drop to reset the motion detection area.
• Motion Detection can be activated when at least one of the channels is enabled, the video codec is set to H.264, and the GOP size is more than 2.

Audio detect

Audio Detection

Enable: Set to [ON] or [OFF]. The Basic Configuration menu is displayed when [ON] is selected.

Basic Configuration

Level: Select the level of audio detection from the drop-down list. You can set the level using the jog control. If you use the jog control, the [Level] option is set to [Manual] automatically. Input Graph: Displays a cumulative graph at intervals of 0.5 seconds within 25 seconds. Audio Detect Status: Displays whether audio is detected or not.

- Save: Click this button to confirm the settings.

Smart Analytics

Preview

You can preview the camera image on the preview window.

Basic Configuration

Tamper Detect: Detects changes on the screen and operates in accordance with the registered event.

- Enable: Set to [On] or [Off].

Face Detect: Detect the recognized face on the screen and operate in accordance with the registered Event.

• Enable: Set to [On] or [Off].
• Sensitivity: Set the [Sensitivity] option.

Note:

When the value is closer to the [Highest] detects sensitively, and when the value is closer to the [Lowest] detects insensitively.

Additional Detect (Available up to three)

To set the detect area

1. Set to [ON] the desired algorithm.
2. Click the [Set Zone] or [Set Line] button.
3. Click the left mouse button on the screen to set the detect area.

- Intrusion: When the perceived object is(are) move into the event area, the Intrusion Event is activated.

- Object Removal: When the object disappears from the setting area, the Object Removal Event is activated.

- Object Desertion: When the object is placed in the setting area, the Object Desertion Event is activated.

- Crossing Line: When the perceived object goes through a setting line, the Crossing Line Event is activated.

- Object Counting: When the perceived object goes through a setting line, the Object Counting Event is activated.

1. Click the [Save] button to confirm the settings.

Note:

• You can select up to 3 algorithms.

- It is possible to set an area from triangle to octagon, and it can be set only as a convex polygon.

- To finish the area setting, click the right mouse button. In the case of an octagon, it is finished by clicking the last point.

- While setting an area, if you click the right mouse button over a point, that point is canceled.

- In the case of [Intrusion], [Object Removal], and [Object Desertion] algorithms, you can set the detection area, and [Crossing Line] and [Object Counting] algorithms allow you to set the direction of detection.

- When detection occurs, the text is displayed to the right of the detection configuration. ("Detected" or "Not Detected")

- When the area setting and activation of [Object Removal] and [Object Desertion] are finished, detection will start in 10 seconds to set the initial background.

- [Object Removal] and [Object Desertion] are activated when the detected object remains in the same condition for 10 seconds.

- [Object Removal] and [Object Desertion] need up to 5 minutes to recognize the object as part of the background.

- Depending on your installation environment, detection errors or performance degradation of image analysis may occur.

Triggered Event

When an event (VA/ Motion detect/ Sensor Event/Audio detect) occurs, this unit records the live images and routes as configured.

Triggered Event List
	Trigger	Relay	FTP(VIDEO)	SMTP	Preset	SDCard Recording	FTP(JPEG)
Sensor	Relay-0
MotionDetect-0
ObjectCounting
TargetDetect
FaceDetect
AudioDetect
Intrusion
CrossingLine
ObjectRemoval
ObjectDesertion

Event schedule list

To edit the Event Schedule

1. Select the Trigger event and click the [Edit] button. The Event schedule window is displayed.
2. Set the options.

- Trigger: Displays the selected trigger event and the current state of the trigger. The current state of the trigger is displayed as On or Off.

• Time: Sets the weekday, Start, Finish, Pre alarm, Post alarm, and Ignore interval time options.

• Action: Selects the options. This occurs when the event runs.

- FTP(Video) server/SMTP server: Uploading of images to an FTP server, or e-mail notification.

- Control relay: The relay is activated or deactivated.

- SD Card recording: Record on the SD card when the event runs.

- Move camera to ([Sensor] in LNB7210 only): Write the number of the preset, the camera would move to this preset when the relay is activated.

- FTP server (JPEG): Sends the JPEG image to the FTP server. Image file and suffix setting is available. You can select Date/Time or Sequence of Suffix.

• Stream: Selects the stream of the connected camera.

1. Click the [Save] button to confirm the settings.

Note:

- You should register the SMTP and FTP server on the Event server setting to set this function.

- Recording of event (VA/ Motion detect/ Sensor Event/ Audio detect) runs every 5 minutes split file.

• Used stream is profile1 (1st) in case of FTP (JPEG) transmission.

- When the [External] mode in [Day/Night] menu is used, the [Sensor] is deactivated.

Scheduled Event

Activation Time

Always: You can use always by using the FTP server regardless of activation time. Only scheduled time: Continuously record according to the set time and the selected weekday. Drag and drop with left button of the mouse to set the channel and time you want to record.

Action

Set the below option.

SD Card recording: Record to SD Card when event occurs. Selects the camera stream for SD card recording. FTP server (JPEG): Upload the image or send the e-mail to the FTP server. Send Image per, Base File Name and Suffix setting are available.

Note:

• You can select through drag of Activation Time table that is possible to select according to weekday and time. - Used stream is profile1(1st) in case of FTP(JPEG) transmission. If always checkbox next to FTP(JPEG) is checked, FTP(JPEG) is always enable regardless of the activation time.

- Save: Click this button to confirm the settings.

Troubleshooting

This section provides useful information to help you to resolve any difficulty you might have with your LG IP device. Fault symptoms, possible causes and remedial actions are provided here.

IP Setting problems

• ARP/Ping: Disconnect and reconnect the power to the network camera. The device should get the IP within 2 minutes. - Ping your camera: Open the command prompt on your computer, type ping with the IP address of the network device. The reply obtained by this command provides explanation for the cause of the problem.

1. bytes = 32 time = 2 ms indicates that the IP address is already used and cannot reuse the same. A new IP address needs to be obtained.
2. Destination host unreachable: indicates that the network device and your computer do not fall in the same subnet hence needs to get a new IP address. Contact the system administrator for the required help.
3. Request timed out: Indicates that the IP is free as it is not used by anyone and the network device can obtain this.

- IP Conflicts: If the LG network device is set with a static IP address and if the DHCP option is set then there may be IP's same as the network device and other network partner. Hence set the static IP address to 0.0.0.0 to resolve this conflict.

Cannot access the camera from browser:

• Reconnect the network camera with power and check the ping operation to know if the IP is used by others.
• Disable the proxy setting in the Browser if you are using a proxy server.
• Check for proper cabling and network connections, try to ping after verifying the connectivity.
• Sometimes when HTTPS is enabled, we would be checking the URL with http, in this case manually change the URL to the http / https accordingly.
• Verify the DNS and Gateway settings if the IP address is assigned statically to the network device.
• If the browser you're using or a page you're viewing is displaying problems, try to clear the browser's cache. If that doesn't fix the problem, try to clear the browser's cookies.

Accessing camera external to the local network

• Firewall Protection: Check for the internet firewall with the system administrator, either he has to do port forwarding or modify the DMZ function on the router.
• Default router needed: Check if you need configure the router settings.

Sporadic network performance

• Network Switches or hubs used may be of the lower configuration and the load on this may not meet the required conditions of our network camera. - Check for the RJ-45 cables that are used for the network connectivity. • If PoE is used check if the power is got by the network camera when connected to it.

Login Password lost

• Reset the camera by pressing the Reset button for more than 3 seconds to restore default settings. • After the factory settings login using the default user name and password.

Video Streaming problems

• If the video streaming does not start on the Web browser, install the LG Web Client ActiveX program on your computer following the instructions on the Web browser.
• Internet Explorer may not display the image normally depends on the ActiveX version. In this case, check the Internet Explorer settings for ActiveX.
• When Windows IE browsers are used always take care to allow pop ups, check this option before we run the web client.
• Check the quality of image by referring the video settings as described in the manual.
• Sometimes there would be intermittent or very slow video streaming, this may be because of the higher resolution and frame rate that are set for the video.
• The video streaming may appear poor at times, this may be because of the network traffic, too many devices connected to the switch or hub, enabling motion detection to each of the video streams and because of other programs running on your computer. • If the images appear to be blurred adjust the focus of the network camera to get a clear image. • Video images if appear white and black adjust the settings in the OSD to get back the colorful image.
• Select the Night mode if the network camera is connected at a place where surrounding light is less or dark.
• If we obtain lower frame rate than set we need to check from the system administrator for sufficient bandwidth available or reduce the number of applications running on the client computer.
• If the client PC's are unable to access the multicast stream, check with the system administrator for the use of a valid multicast address or check if the router is supporting multicasting. • If the images appear to have white of gray stripes on it, upgrade the Video graphics driver on the client PC to the latest version.
• Video images may be noisy if you are using the camera in a very low light environment or the bit rate / quality is set to very low values. Provide higher values for quality and support the surrounding environment with enough light.

Audio condition

The client computer that is interacting with the camera needs to have a sound card that is functional to support speaker and microphone.

The sound card needs to be checked for its support for full duplex communication.

Ensure that the mute button of the client computer is not set and all the audio settings are correct.

Speaker button on the web viewer should be enabled to listen the audio from the network camera.

Ensure that the bidirectional audio button is enabled on the Web viewer and the microphone is set.

Change the input and the output gain for microphone and the speaker respectively to set correct audio level.

Browser's problems

When you have a problem with the browser, press the [Refresh] button on your browser window.

Clear browser's Cache

• If your browser is not working correctly after firmware upgrade, please follow the solution below. - Solution: Deleting your browser's cache may resolve this issue. 1. Open Internet Options in the browser's Tools menu and click the [Delete Files] button in the second entry (Internet temporary files). 2. Check the other settings that should not be changed. - If the browser you're using or a page you're viewing is displaying problems, try to clear the browser's cache. If that doesn't fix the problem, try to clear the browser's cookies.

RCA output problem

• RCA output is used for initial installation. • Depending on the IP Camera usage scenario, RCA output video may not be smooth. It is used for initial installation only.

BNC output usage

BNC connector is for convenience of camera installation, and it is not suited for surveillance.

For all further support, please contact the supplier or forums or websites.

Open source software notice

To obtain the source code under GPL, LGPL, MPL and other open source licenses that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [e-mail]. This offer is valid for three (3) years from the date on which you purchased the product.

Specifications

Item LNB7210 series
Camera	Image Device 6.4 mm (1/2.8 Type) CMOS
	Lens Type CS mountable
	Day / Night ICR (Auto / Day / Night / External / Schedule)
	Minimum Illumination	Color: 0.03 lx (F1.2, Gain : High, 1/30 sec, 50 IRE)
		B/W: 0.003 lx (F1.2, Gain : High, 1/30 sec, 50 IRE)
	WDR Support
	Focus ABF
	Image Enhancement	Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot
Video / Audio	Compression H.264, H.264_High, MJPEG
	Resolution 1920 x 1080 / 1280 x 720 / D1 (704 x 576) / CIF (352 x 240)
	Maximum Frame Rate 60 fps @ 1920 x 1080
	Multi-Streaming Up to 4
	ROI (Region of Interest) Smart codec (Up to 8)
	Video Analytics	Motion detection, Tampering alarm, Face detection, Intrusion detection, Crossing line, Object counting, Object removal, Object desertion
	Text Overlay Support
	Audio Compression G.711, G.726
	2-way Audio Support
	Audio Detection Support
Event	Event Trigger	Video analytics, Audio detection, Alarm input
	Event Notification	Relay Out, Email, FTP
	Pre Event Buffering	Support
Interface	Analog Out	RCA out
	Audio In / Out	1 In / 1 Out
	Alarm In / Out	1 In / 1 Out
	RS-485	Support
	SD Slot	micro SD (Up to 32 GB)
Network	Ethernet	RJ-45 10 / 100 BASE-T
	Security	Password protection, HTTPS (SSL, TLS), IP filtering, IEEE 802.1X
	Open Protocol	ONVIF 2.2 Profile S, PSIA 1.1
	Protocol	IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP
		IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)
	Integrated Software	LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android)
	Connections	Up to 20
General	Power Source DC 12 V, PoE
	Maximum Power Consumption	6.9 W
	Maximum Input Current	590 mA (DC 12 V), 150 mA (PoE)
	Operation Temperature / Humidity	-10 °C to 55 °C / 0 % RH to 80 % RH
	Dimension (W x H x D)	69 mm x 54 mm x 136 mm
	Weight	395 g
Item LNB5110 series
Camera	Image Device 6.28 mm (1/3 Type) CMOS
	Lens Type CS mountable
	Day / Night ICR (Auto / Day / Night / External / Schedule)
	Minimum Illumination	Color: 0.03 lx (F1.2, Gain : High, 1/30 sec, 50 IRE)
		B/W: 0.002 lx (F1.2, Gain : High, 1/30 sec, 50 IRE)
	WDR Support
	Image Enhancement	Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot
Video / Audio	Compression H.264, H.264_High, MJPEG
	Resolution 1280 x 1024 / 1280 x 720 / D1 (704 x 576) / CIF (352 x 240)
	Maximum Frame Rate 60 fps @ 1280 x 1024
	Multi-Streaming Up to 4
	ROI (Region of Interest) Smart codec (Up to 8)
	Video Analytics	Motion detection, Tampering alarm, Face detection, Intrusion detection, Crossing line, Object counting, Object removal, Object desertion
	Text Overlay Support
	Audio Compression G.711, G.726
	2-way Audio Support
	Audio Detection Support
Event	Event Trigger Video analytics,	Audio detection, Alarm input
	Event Notification	Relay Out, Email, FTP
	Pre Event Buffering	Support
Interface	Analog Out	RCA out
	Audio In / Out	1 In / 1 Out
	Alarm In / Out	1 In / 1 Out
	RS-485	Support
	SD Slot	micro SD (Up to 32 GB)
Network	Ethernet	RJ-45 10 / 100 BASE-T
	Security	Password protection, HTTPS (SSL, TLS), IP filtering, IEEE 802.1X
	Open Protocol	ONVIF 2.2 Profile S, PSIA 1.1
	Protocol	IPv4 and IPv6: TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP
		IPv4: FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)
	Integrated Software	LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android)
	Connections	Up to 20
General	Power Source DC 12 V, PoE
	Maximum Power Consumption	5.9 W
	Maximum Input Current	490 mA (DC 12 V), 130 mA (PoE)
	Operation Temperature / Humidity	-10 °C to 55 °C / 0 % RH to 80 % RH
	Dimension (W x H x D)	69 mm x 54 mm x 122 mm
	Weight	365 g

Item LND5110 series
Camera	Image Device 6.28 mm (1/3 Type) CMOS
	Lens Type 3 mm to 9 mm F1.2
	Day / Night ICR (Auto / Day / Night / External / Schedule)
	Minimum Illumination	Color: 0.03 lx (F1.2, Gain : High, 1/30 sec)
		B/W: 0.002 lx (F1.2, Gain : High, 1/30 sec)
	WDR Support
	Image Enhancement	Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot
Video / Audio	Compression H.264, H.264_High, MJPEG
	Resolution 1280 x 1024 / 1280 x 720 / D1 (704 x 576) / CIF (352 x 240)
	Maximum Frame Rate 60 fps @ 1280 x 1024
	Multi-Streaming Up to 4
	ROI (Region of Interest) Smart codec (Up to 8)
	Video Analytics	Motion detection, Tampering alarm, Face detection, Intrusion detection, Crossing line, Object counting, Object removal, Object desertion
	Text Overlay Support
	Audio Compression G.711, G.726
	2-way Audio Support
	Audio Detection Support
Event	Event Trigger Video analytics,	Audio detection, Alarm input
	Event Notification	Relay Out, Email, FTP
	Pre Event Buffering	Support
Interface	Analog Out	BNC Out
	Audio In / Out	1 In / 1 Out
	Alarm In / Out	1 In / 1 Out
	SD Slot	micro SD (Up to 32 GB)
Network	Ethernet	RJ-45 10 / 100 BASE-T
	Security	Password protection, HTTPS (SSL, TLS), IP filtering, IEEE 802.1X
	Open Protocol	ONVIF 2.2 Profile S, PSIA 1.1
	Protocol	IPv4 and IPv6: TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP
		IPv4: FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)
	Integrated Software	LG Ipsolute VMS Suite / Mobile App (iPhone, iPad, Android)
	Connections	Up to 20
General	Power Source DC 12 V, PoE
	Maximum Power Consumption	5.9 W
	Maximum Input Current	490 mA (DC 12 V), 130 mA (PoE)
	Operation Temperature / Humidity	-10 °C to 55 °C / 0 % RH to 80 % RH
	Dimension (∅ x H)	140 mm x 122 mm
	Weight	530 g
Item LNV5110R series LND5110R series
Camera	Image Device 6.28 mm (1/3 Type) CMOS
	Lens Type 3 mm to 9 mm F1.2
	Day / Night ICR (Auto / Day / Night / External / Schedule)
	Minimum Illumination	Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE)
		B/W: 0 lx @ IR LED on
	WDR Support
	IR Distance 30 m
	Image Enhancement	Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot, Smart IR
Video / Audio	Compression H.264, H.264_High, MJPEG
	Resolution 1280 x 1024 / 1280 x 720 / D1 (704 x 576) / CIF (352 x 240)
	Maximum Frame Rate 60 fps @ 1280 x 1024
	Multi-Streaming Up to 4
	ROI (Region of Interest) Smart codec (Up to 8)
	Video Analytics	Motion detection, Tampering alarm, Face detection, Intrusion detection, Crossing line, Object counting, Object removal, Object desertion
	Text Overlay Support
	Audio Compression G.711, G.726
	2-way Audio Support
	Audio Detection	Support
Event	Event Trigger	Video analytics, Audio detection, Alarm input
	Event Notification	Relay Out, Email, FTP
	Pre Event Buffering	Support
Interface	Analog Out	BNC out
	Audio In / Out	1 In / 1 Out
	Alarm In / Out	1 In / 1 Out
	SD Slot	micro SD (Up to 32 GB)
Network	Ethernet	RJ-45 10 / 100 BASE-T
	Security	Password protection, HTTPS (SSL, TLS), IP filtering, IEEE 802.1X
	Open Protocol	ONVIF 2.2 Profile S, PSIA 1.1
	Protocol	IPv4 and IPv6: TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP
		IPv4: FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)
	Integrated Software	LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android)
	Connections	Up to 20
General	Power Source DC 12 V, PoE
	Maximum Power Consumption	8.2 W
	Maximum Input Current	610 mA (DC 12 V), 170 mA (PoE)
	Operation Temperature / Humidity	-10 °C to 55 °C / 0 % RH to 80 % RH
	Protection	IK10, IP66	Not support
	Dimension (∅ x H)	140 mm x 122 mm
	Weight	905 g	550 g
Item LNU5110R series
Camera	Image Device 6.28 mm (1/3 Type) CMOS
	Lens Type 3 mm to 9 mm F1.2
	Day / Night ICR (Auto / Day / Night / External / Schedule)
	Minimum Illumination	Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE)
		B/W: 0 lx @ IR LED on
	WDR Support
	IR Distance 40 m
	Image Enhancement	Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot, Smart IR
Video / Audio	Compression H.264, H.264_High, MJPEG
	Resolution 1280 x 1024 / 1280 x 720 / D1 (704 x 576) / CIF (352 x 240)
	Maximum Frame Rate 60 fps @ 1280 x 1024
	Multi-Streaming Up to 4
	ROI (Region of Interest) Smart codec (Up to 8)
	Video Analytics	Motion detection, Tampering alarm, Face detection, Intrusion detection, Crossing line, Object counting, Object removal, Object desertion
	Text Overlay Support
	Audio Compression G.711, G.726
	2-way Audio Support
	Audio Detection Support
Event	Event Trigger	Video analytics, Audio detection, Alarm input
	Event Notification	Relay Out, Email, FTP
	Pre Event Buffering	Support
Interface	Analog Out	BNC out
	Audio In / Out	1 In / 1 Out
	Alarm In / Out	1 In / 1 Out
	SD Slot	micro SD (Up to 32 GB)
Network	Ethernet	RJ-45 10 / 100 BASE-T
	Security	Password protection, HTTPS (SSL, TLS), IP filtering, IEEE 802.1X
	Open Protocol	ONVIF 2.2 Profile S, PSIA 1.1
	Protocol	IPv4 and IPv6: TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP
		IPv4: FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)
	Integrated Software	LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android)
	Connections	Up to 20
General	Power Source AC 24 V, DC 12 V, PoE
	Maximum Power Consumption	10.6 W
	Maximum Input Current	670 mA (AC 24 V), 750 mA (DC 12 V), 200 mA (PoE)
	Operation Temperature / Humidity	-10 °C to 55 °C / 0 % RH to 80 % RH
	Protection	IK10, IP66
	Dimension (W x H x D)	92 mm x 90 mm x 339 mm
	Weight	1.54 kg (with Sunshield 1.7 kg)
Item LNV7210 series LND7		210 series
Camera	Image Device 6.4 mm (1/2.8 Type) CMOS
	Lens Type 3 mm to 9 mm F1.2	(x3 Zoom)
	Day / Night ICR (Auto / Day / Night / External / Schedule)
	Minimum Illumination	Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE)
		B/W: 0.003 lx @ F1.2 (1/30 sec, 50 IRE)
	WDR Support
	Image Enhancement	Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot
Video / Audio	Compression H.264, H.264_High, MJPEG
	Resolution 1920 x 1080 / 1280 x 720 / D1 (704 x 576) / CIF (352 x 240)
	Maximum Frame Rate 60 fps @ 1920 x 1080
	Multi-Streaming Up to 4
	ROI (Region of Interest) Smart codec (Up to 8)
	Video Analytics	Motion detection, Tampering alarm, Face detection, Intrusion detection, Crossing line, Object counting, Object removal, Object desertion
	Text Overlay Support
	Audio Compression G.711, G.726
	2-way Audio Support
	Audio Detection Support
Event	Event Trigger	Video analytics, Audio detection, Alarm input
	Event Notification	Relay Out, Email, FTP
	Pre Event Buffering	Support
Interface	Analog Out	BNC out
	Audio In / Out	1 In / 1 Out
	Alarm In / Out	1 In / 1 Out
	SD Slot	micro SD (Up to 32 GB)
Network	Ethernet	RJ-45 10 / 100 BASE-T
	Security	Password protection, HTTPS (SSL, TLS), IP filtering, IEEE 802.1X
	Open Protocol	ONVIF 2.2 Profile S, PSIA 1.1
	Protocol	IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP
		IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)
	Integrated Software	LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android)
	Connections	Up to 20
General	Power Source DC 12 V, PoE
	Maximum Power Consumption	8.7 W (DC 12 V), 10.4 W (PoE 48 V)
	Maximum Input Current	730 mA (DC 12 V), 280 mA (PoE)
	Operation Temperature / Humidity	-10 °C to 50 °C / 0 % RH to 80 % RH
	Protection	IK10, IP66	Not support
	Dimension (∅ x H)	140 mm x 122 mm
	Weight	950 g	613 g
Item LNV7210R series LND7210R series
Camera	Image Device 6.4 mm (1/2.8 Type) CMOS
	Lens Type 3 mm to 9 mm F1.2 (x3 Zoom)
	Day / Night ICR (Auto / Day / Night / External / Schedule)
	Minimum Illumination	Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE)
		B/W: 0 lx @ IR LED on
	WDR Support
	IR Distance 20 m
	Image Enhancement	Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot, Smart IR
Video / Audio	Compression H.264, H.264_High, MJPEG
	Resolution 1920 x 1080 / 1280 x 720 / D1 (704 x 576) / CIF (352 x 240)
	Maximum Frame Rate 60 fps @ 1920 x 1080
	Multi-Streaming Up to 4
	ROI (Region of Interest) Smart codec (Up to 8)
	Video Analytics	Motion detection, Tampering alarm, Face detection, Intrusion detection, Crossing line, Object counting, Object removal, Object desertion
	Text Overlay Support
	Audio Compression G.711, G.726
	2-way Audio Support
	Audio Detection	Support
Event	Event Trigger	Video analytics, Audio detection, Alarm input
	Event Notification	Relay Out, Email, FTP
	Pre Event Buffering	Support
Interface	Analog Out	BNC out
	Audio In / Out	1 In / 1 Out
	Alarm In / Out	1 In / 1 Out
	SD Slot	micro SD (Up to 32 GB)
Network	Ethernet	RJ-45 10 / 100 BASE-T
	Security	Password protection, HTTPS (SSL, TLS), IP filtering, IEEE 802.1X
	Open Protocol	ONVIF 2.2 Profile S, PSIA 1.1
	Protocol	IPv4 and IPv6: TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP
		IPv4: FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)
	Integrated Software	LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android)
	Connections	Up to 20
General	Power Source DC 12 V, PoE
	Maximum Power Consumption	8.7 W (DC 12 V), 10.4 W (PoE 48 V)
	Maximum Input Current	730 mA (DC 12 V), 280 mA (PoE)
	Operation Temperature / Humidity	-10 °C to 50 °C / 0 % RH to 80 % RH
	Protection	IK10, IP66	Not support
	Dimension (∅ x H)	140 mm x 122 mm
	Weight	957 g	620 g
Item LNU7210R series
Camera	Image Device 6.4 mm (1/2.8 Type) CMOS
	Lens Type 3 mm to 9 mm F1.2 (x3 Zoom)
	Day / Night ICR (Auto / Day / Night / External / Schedule)
	Minimum Illumination	Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE)
		B/W: 0 lx @ IR LED on
	WDR Support
	IR Distance 30 m
	Image Enhancement	Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot, Smart IR
Video / Audio	Compression H.264, H.264_High, MJPEG
	Resolution 1920 x 1080 / 1280 x 720 / D1 (704 x 576) / CIF (352 x 240)
	Maximum Frame Rate 60 fps @ 1920 x 1080
	Multi-Streaming Up to 4
	ROI (Region of Interest) Smart codec (Up to 8)
	Video Analytics	Motion detection, Tampering alarm, Face detection, Intrusion detection, Crossing line, Object counting, Object removal, Object desertion
	Text Overlay Support
	Audio Compression G.711, G.726
	2-way Audio Support
	Audio Detection Support
Event	Event Trigger	Video analytics, Audio detection, Alarm input
	Event Notification	Relay Out, Email, FTP
	Pre Event Buffering	Support
Interface	Analog Out	BNC out
	Audio In / Out	1 In / 1 Out
	Alarm In / Out	1 In / 1 Out
	SD Slot	micro SD (Up to 32 GB)
Network	Ethernet	RJ-45 10 / 100 BASE-T
	Security	Password protection, HTTPS (SSL, TLS), IP filtering, IEEE 802.1X
	Open Protocol	ONVIF 2.2 Profile S, PSIA 1.1
	Protocol	IPv4 and IPv6: TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP
		IPv4: FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)
	Integrated Software	LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android)
	Connections	Up to 20
General	Power Source AC 24 V, DC 12 V, PoE
	Maximum Power Consumption	10.6 W (AC 24 V), 9.1 W (DC 12 V), 9.6 W (PoE)
	Maximum Input Current	670 mA (AC 24 V), 750 mA (DC 12 V), 200 mA (PoE)
	Operation Temperature / Humidity	-10 °C to 50 °C / 0 % RH to 80 % RH
	Protection	IK10, IP66
	Dimension (W x H x D)	92.1 mm x 89.8 mm x 338.6 mm
	Weight	1.54 kg (with Sunshield 1.7 kg)

LG

Life's Good