LED CAT-80 - Lighting Eurolite - Free user manual and instructions
Find the device manual for free LED CAT-80 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Eurolite |
| Model | LED CAT-80 |
| Product Type | LED Lighting Effect |
| Light Source | 80 high-power LEDs (RGB or single color) |
| Power Consumption | Approx. 80W |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | Approx. 280 x 230 x 120 mm |
| Weight | Approx. 1.5 kg |
| DMX Channels | 4/8 channel modes selectable |
| Control | DMX512, Sound activation, Master/Slave, Standalone |
| Beam Angle | Approx. 25° (various optics available) |
| Housing | Metal and plastic, black finish |
| Cooling | Passive convection cooling |
| Operating Temperature | 0°C to 40°C |
| Protection Class | IP20 (indoor use only) |
| Mounting | Floor standing or hanging bracket |
| Included Accessories | Power cord, user manual, mounting bracket |
| Optional Accessories | Flight case, gel filter frame |
| Maintenance | Clean external surfaces with a soft dry cloth; no solvents |
| Safety | Low voltage, overheat protection, CE certified |
| Spare Parts | LED modules, power supply unit, control board |
| Repairability | Modular design; individual LED modules replaceable |
Frequently Asked Questions - LED CAT-80 Eurolite
How do I set up the Eurolite LED CAT-80 for the first time?
Connect the included power cord to a mains outlet (AC 100-240V). Use the DMX cables to link multiple units if needed. Set the DMX address via the control panel following the manual.
What DMX modes does the LED CAT-80 support?
It supports 4-channel (basic) and 8-channel (advanced) modes. In 4-channel mode, you control red, green, blue, and dimmer. In 8-channel mode, additional channels for strobe, color macros, and effects are available.
Can I use the LED CAT-80 without a DMX controller?
Yes, it has standalone modes: sound activation (built-in microphone), master/slave mode (auto programs), or manual control via the buttons. No DMX controller required for basic operation.
How do I clean and maintain the fixture?
Disconnect power before cleaning. Use a soft, dry cloth to wipe the housing and lens. Avoid abrasive cleaners or solvents. Regularly check fans and air vents for dust buildup.
What should I do if the light does not turn on?
Check the power cable and mains supply. Ensure the fuse is intact (replace if blown). Verify the DMX address is correct if using DMX control. If still not working, contact Eurolite support.
Is the LED CAT-80 suitable for outdoor use?
No, it has an IP20 rating, meaning it is only protected against solid objects larger than 12mm and not against water. Use indoors only.
Can I replace the LEDs myself?
Yes, the LED modules are replaceable. However, it requires opening the housing and basic soldering skills. Refer to the manual for detailed instructions or contact a qualified technician.
What is the maximum number of units I can daisy-chain?
In DMX mode, the theoretical limit is 32 units per DMX line, but practical limits depend on cable quality and length. Use a DMX booster for longer runs.
How do I reset the fixture to factory settings?
Press and hold the 'Menu' button for 5 seconds until the display shows 'Reset'. Confirm by pressing 'Enter'. The unit will restart with default settings.
Does the LED CAT-80 have a strobe effect?
Yes, in 8-channel DMX mode, channel 5 controls strobe speed (0-255). In standalone mode, select a program that includes strobe.
User questions about LED CAT-80 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED CAT-80 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED CAT-80 by Eurolite.