TR722L84L - Tumble dryer AEG - Free user manual and instructions
Find the device manual for free TR722L84L AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | AEG |
| Model | TR722L84L |
| Installation Type | Freestanding |
| Drying System | Heat Pump |
| Capacity | 8 kg |
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 850 x 600 x 650 mm |
| Weight | 52 kg |
| Power Supply | 220-240 V / 50 Hz |
| Number of Drying Programs | 15 |
| Reversible Door | Yes |
| Control Type | Electronic with LED Display |
| Filter Indication | Yes |
| Condenser Cleaning Indicator | Yes |
| Child Lock | Yes |
| Delayed Start | Yes (up to 24h) |
| Spare Parts Availability | 7 years |
| Maintenance | Clean lint filter after each cycle; empty water container; clean condenser regularly |
| Safety Features | Child lock, overheating protection |
Frequently Asked Questions - TR722L84L AEG
How do I clean the lint filter?
Open the door, pull out the filter, remove lint with your hand or a soft brush, rinse if needed, and dry before reinserting.
Why won't my dryer start?
Check that the door is fully closed, the power cord is plugged in, and the circuit breaker is on. Also empty the water container if full.
How to install the dryer?
Place on a level, sturdy surface, leave clearance for ventilation, and connect the drain hose if using the optional drainage system.
What does error code E40 mean?
E40 indicates a problem with the water container or drainage. Ensure the container is empty and correctly inserted.
How to reverse the door?
Refer to the manual: remove screws, swap hinge and catch positions, then reattach door on the opposite side. Use a Torx screwdriver.
How to clean the condenser?
Remove the condenser unit (usually behind a flap), rinse with warm water, let dry, and reinsert. Clean every few months.
Why is drying time too long?
Possible causes: overloaded drum, clogged lint filter or condenser, room temperature too low, or incorrect program selection.
How to set delayed start?
Press the 'Delay' button repeatedly to select the delay time (up to 24 hours), then press Start/Pause. The dryer will start after the set delay.
Is the dryer suitable for all fabrics?
No, check care labels. Wool, silk, and some synthetics require special programs or should not be tumble dried. Use appropriate program.
How to maintain the dryer?
Regularly clean the lint filter, empty water container, clean condenser, and wipe the drum. Also clean the door seal and ensure good ventilation.
User questions about TR722L84L AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual TR722L84L - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TR722L84L by AEG.