PCM-26D2CA - Industrial electronic board Advantech - Free user manual and instructions
Find the device manual for free PCM-26D2CA Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Single Board Computer |
| Model | PCM-26D2CA |
| Brand | Advantech |
| Form Factor | PC/104 (90 x 96 mm) |
| Weight | Approximately 100 g |
| Power Supply | 5V DC |
| Processor | Embedded x86 (varies by variant) |
| Memory | SO-DIMM DDR3/DDR4 (model dependent) |
| Storage | CompactFlash or microSD slot |
| Expansion | PC/104 and PCI-104 bus |
| Operating Temperature | 0°C to 60°C |
| Main Functions | Industrial control, data acquisition, embedded computing |
| Interface Ports | USB, COM, Ethernet, GPIO |
| Maintenance | Keep free of dust; avoid moisture |
| Cleaning | Use dry cloth; avoid solvents |
| Safety Precautions | Use ESD protection; disconnect power before handling |
| Spare Parts | Not applicable (integrated board) |
| Repairability | Replace entire board if faulty |
| General Information | For professional/industrial use only |
Frequently Asked Questions - PCM-26D2CA Advantech
What is the Advantech PCM-26D2CA?
The PCM-26D2CA is a single board computer from Advantech, designed for embedded and industrial applications.
What form factor does the PCM-26D2CA use?
It uses the PC/104 standard form factor, measuring 90 x 96 mm.
What power supply is required?
A 5V DC power supply is required. Ensure the current rating meets the board's demands (typically 1-2A).
Which operating systems are supported?
Common operating systems include Windows Embedded, Linux, and QNX, depending on the specific variant.
How do I install the PCM-26D2CA?
Mount the board onto a PC/104 stack using standoffs. Connect power and I/O cables. Ensure proper cooling.
What interfaces are available?
The board typically includes USB, COM (RS-232/422/485), Ethernet, and GPIO ports.
Can the memory be upgraded?
Yes, memory is installed via a SO-DIMM slot. Consult the manual for supported types and capacities.
What is the operating temperature range?
The industrial version operates from 0°C to 60°C. Extended temperature versions may be available.
Where can I find the user manual?
The manual is available for free download on notice-facile.com in PDF format.
How do I troubleshoot boot failures?
Check the power supply, ensure all cables are seated, and verify the CMOS battery if present. Refer to the manual for diagnostic LEDs.
User questions about PCM-26D2CA Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial electronic board in PDF format for free! Find your manual PCM-26D2CA - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PCM-26D2CA by Advantech.
USER MANUAL PCM-26D2CA Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : PCM-26D2CA
Category : Industrial electronic board