WISE-4210-NA - Uncategorized Advantech - Free user manual and instructions
Find the device manual for free WISE-4210-NA Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IoT Wireless Gateway |
| Brand | Advantech |
| Model | WISE-4210-NA |
| Dimensions | 145 x 105 x 35 mm |
| Weight | 0.5 kg |
| Power Supply | 12-24 VDC |
| Operating Temperature | -20°C to 70°C |
| Wireless Connectivity | LTE, Wi-Fi, Bluetooth |
| Digital I/O | 2 Digital Inputs, 2 Digital Outputs |
| Supported Protocols | Modbus, MQTT, REST API |
| Management | Web-based interface |
| Certifications | CE, FCC |
| Mounting | DIN rail or wall mount |
| Maintenance | Regular cleaning, check cable connections |
| Safety Instructions | Use only specified power supply, avoid moisture |
| Spare Parts | Power adapter, antennas |
| General Information | User manual available for download on manufacturer website |
Frequently Asked Questions - WISE-4210-NA Advantech
How to reset the WISE-4210-NA to factory defaults?
Press and hold the reset button on the device for at least 5 seconds until the LED flashes rapidly. Release the button; the device will reboot with factory settings.
What is the default IP address of the WISE-4210-NA?
The default IP address is 192.168.1.1. Ensure your computer is on the same subnet to access the web interface.
Can the WISE-4210-NA be used in outdoor environments?
The device is designed for indoor use only. It should be installed in a clean, dry environment with protection from direct sunlight and moisture.
How to connect the WISE-4210-NA to Wi-Fi?
Access the web interface via the default IP, go to Wireless Settings, select your Wi-Fi network, enter the password, and apply the configuration.
What power supply is required for the WISE-4210-NA?
Use a 12-24 VDC power supply with at least 1A current rating. The power connector is a 2-pin terminal block.
How to configure Modbus communication on the WISE-4210-NA?
Navigate to the Modbus configuration page in the web interface. Set the device role (master/slave), baud rate, parity, and mapping of registers.
Does the WISE-4210-NA support MQTT?
Yes, it supports MQTT. Configure the broker address, port, topic, and authentication credentials under MQTT settings in the web interface.
What is the maximum number of devices I can connect to the WISE-4210-NA via Bluetooth?
The Bluetooth module supports up to 7 simultaneous connections, but performance may vary based on data traffic.
How to update the firmware on the WISE-4210-NA?
Download the latest firmware from the Advantech website, upload it via the firmware update page in the web interface, and wait for the device to reboot.
What should I do if the device is not connecting to the network?
Check the LED indicators: Power LED should be solid, Network LED should blink. Verify network cable connections, IP settings, and firewall settings. If using cellular, ensure SIM card is inserted and has data plan.
User questions about WISE-4210-NA Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual WISE-4210-NA - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WISE-4210-NA by Advantech.
USER MANUAL WISE-4210-NA Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : WISE-4210-NA
Category : Uncategorized